今天早上终于搞好我的CDMA上网卡了！～
我的是拓实T20
下面是方法：
具体的我也不知道怎么弄的
反正就这样搞好了 
以下内容很乱 但我 就是这样一步步搞好的
输入 lsusb
输出：
Bus 006 Device 001: ID 0000:0000
Bus 007 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 15ca:00c3
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
在终端中输入：
root@uv-laptop:~# modprobe usbserial vendor=0x10c4 product=0xea60
root@uv-laptop:~# modprobe usbserial vendor=0x15ca product=0x00c3
其中 10c4 ea60 15ca 00c3 参照自己的输出
root@uv-laptop:~# dmesg | grep tty
[ 12.649191] console [tty0] enabled
[ 29.184911] usb 3-2: cp2101 converter now attached to ttyUSB0
[ 267.232450] cp2101 ttyUSB0: cp2101 converter now disconnected from ttyUSB0
[ 275.778885] usb 3-2: cp2101 converter now attached to ttyUSB0
以前以为ttyUSB0没用
root@uv-laptop:~# mknod /dev/ttyUSB0 c 188 0
mknod: `/dev/ttyUSB0': File exists
root@uv-laptop:~# mknod /dev/ttyUSB1 c 188 1
root@uv-laptop:~# mknod /dev/ttyUSB0 c 166 0
mknod: `/dev/ttyUSB0': File exists
root@uv-laptop:~# mknod /dev/ttyUSB1 c 166 1
mknod: `/dev/ttyUSB1': File exists
ACM设备是166
root@uv-laptop:~# gedit /etc/wvdial.conf
把打开的文件内容全删除换成：
[Dialer cdma]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem = /dev/ttyUSB0
Phone = #777
Idle Seconds = 300
Password = CARD
Modem Type = Analog Modem
Stupid Mode = 1
Compuserve = 0
Baud = 230400
Auto DNS = 1
Dial Command = ATDT
Ask Password = 0
ISDN = 0
Username = CARD
然后开始拨号吧 嘿嘿：root@uv-laptop:~# wvdial cdma
输出：--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
root@uv-laptop:~# gedit /etc/wvdial.conf
root@uv-laptop:~# wvdial cdma
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
$DCON
$DCONTYPE:2,2
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Fri Jun 13 06:46:59 2008
--> Pid of pppd: 7907
--> Using interface ppp0
--> pppd: ���[06][08]��[06][08]
--> pppd: ���[06][08]��[06][08]
--> pppd: ���[06][08]��[06][08]
--> pppd: ���[06][08]��[06][08]
--> pppd: ���[06][08]��[06][08]
--> local IP address 220.207.138.250
--> pppd: ���[06][08]��[06][08]
--> remote IP address 4.4.4.4
--> pppd: ���[06][08]��[06][08]
--> primary DNS address 220.192.8.58
--> pppd: ���[06][08]��[06][08]
--> secondary DNS address 220.192.32.103
--> pppd: ���[06][08]��[06][08]
Caught signal 2: Attempting to exit gracefully...
--> Terminating on signal 15
--> pppd: ���[06][08]��[06][08]
--> Connect time 17.8 minutes.
--> pppd: ���[06][08]��[06][08]
--> pppd: ���[06][08]��[06][08]
到这里了就把这个终端放一边边吧 不用管他了
哈哈现在可以上网了,随便进个网站看看 呵呵！～
