##ubuntu 8.04使用cdma上网卡
#1.安装wvdial
sudo apt-get install wvdial
#如果安装过程中出现异常，则需要重新安装，可能和之前自带的版本不符
sudo apt-get autoremove wvdial
sudo apt-get install wvdial
#2.查看安装情况
sudo wvdialconf
#3.配置文件
sudo /etc/wvdial.conf
#修改为：
[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Phone = #777
ISDN = 0
Username = CARD
Init1 = AT + CRM = 1
Password = CARD
Modem = /dev/ttyACM0
Baud = 460800
#4.启动wvdial
sudo wvdial
##这样就可以使用cdma卡上网了
www.hjy273.com
[原创]ubuntu 8.04使用cdma上网卡
-
hjy273
- 帖子： 62
- 注册时间： 2007-07-31 12:52
-
Longinvs
- 帖子： 12
- 注册时间： 2008-03-18 16:00
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.