[问题]关于华为认证Recv Packet: Waiting for result ....Fail(已经解决)
发表于 : 2006-06-10 18:08
Send Packet: EAPOL Start ....OK
Recv Packet: Request Identify ....OK
Send Packet: Response Identify....OK
Recv Packet: Request MD5_challenge ....OK
Send Packet: Response MD5_challenge....OK
Recv Packet: Waiting for result ....Fail
上不了网咯。。。
IP:192.168.29.129
掩码:255.255.254.0
网关:192.168.28.1
使用的认证客户端是论坛里下的hustauth
linux下的interfaces内容是
address 192.168.29.129
netmask 255.255.254.0
netword 192.168.28.0
broadcast 192.168.29.255
gateway 192.168.28.1
dns 210.36.158.2
在论坛找到个别的方法。。下去再试试:)
按照论坛
viewtopic.php?t=10523&highlight=%E8%AE%A4%E8%AF%81
上的方法试过了也不行
运行sudo ./linux1x -u 用户名字/密码 -n eth0 -d以后
出现:
satrt 802.1X authentication
device check
server check
E2546 ??(乱码)IP(乱码)
authentication failed!
后面无奈乱弄了
执行
sudo ./linux1x -c
The way to initialize 802.1X authentication.......:multicast
Send all packets by multicast.....................:N
Refresh IP address after connecting...............:Y
Save message and package to log...................:N
Continue to configure your network connection arguments?(Y/N)
y
There are two ways to initialize 802.1X authentication:
1. Trap by broadcast.
2. Trap by multicast.
Please choose the way to initialize the 802.1X authentication :
1
Send all packets by multicast? (Y/N):
y
Refresh your IP address after connecting? (Y/N):
n
Save message and package to log?(Y/N):
n
Configuration has finished, do you want to save it?(Y/N)
y
Save configuration sucessfully!
peixxfnh@DarkUbuntu:~/h3c802.1xClient$ sudo ./linux1x
Please enter your user name (less than 128 characters):俺用户名
Please enter your password (less than 64 characters):
start 802.1X authentication
device check
server check
pass authentication
proxy check on
multi-network-card check on
http proxy check on
竟然成功了。。。
哪个大大知道上面选项的意思可以帮助说明下吗?
sudo ./linux1x -c
The way to initialize 802.1X authentication.......:multicast
Send all packets by multicast.....................:N
Refresh IP address after connecting...............:Y
Save message and package to log...................:N
Continue to configure your network connection arguments?(Y/N)
y
There are two ways to initialize 802.1X authentication:
1. Trap by broadcast.
2. Trap by multicast.
Please choose the way to initialize the 802.1X authentication :
1
Send all packets by multicast? (Y/N):
y
Refresh your IP address after connecting? (Y/N):
n
Save message and package to log?(Y/N):
n
Configuration has finished, do you want to save it?(Y/N)
y
Save configuration sucessfully!
就是这里设置的~
Recv Packet: Request Identify ....OK
Send Packet: Response Identify....OK
Recv Packet: Request MD5_challenge ....OK
Send Packet: Response MD5_challenge....OK
Recv Packet: Waiting for result ....Fail
上不了网咯。。。
IP:192.168.29.129
掩码:255.255.254.0
网关:192.168.28.1
使用的认证客户端是论坛里下的hustauth
linux下的interfaces内容是
address 192.168.29.129
netmask 255.255.254.0
netword 192.168.28.0
broadcast 192.168.29.255
gateway 192.168.28.1
dns 210.36.158.2
在论坛找到个别的方法。。下去再试试:)
按照论坛
viewtopic.php?t=10523&highlight=%E8%AE%A4%E8%AF%81
上的方法试过了也不行
运行sudo ./linux1x -u 用户名字/密码 -n eth0 -d以后
出现:
satrt 802.1X authentication
device check
server check
E2546 ??(乱码)IP(乱码)
authentication failed!
后面无奈乱弄了
执行
sudo ./linux1x -c
The way to initialize 802.1X authentication.......:multicast
Send all packets by multicast.....................:N
Refresh IP address after connecting...............:Y
Save message and package to log...................:N
Continue to configure your network connection arguments?(Y/N)
y
There are two ways to initialize 802.1X authentication:
1. Trap by broadcast.
2. Trap by multicast.
Please choose the way to initialize the 802.1X authentication :
1
Send all packets by multicast? (Y/N):
y
Refresh your IP address after connecting? (Y/N):
n
Save message and package to log?(Y/N):
n
Configuration has finished, do you want to save it?(Y/N)
y
Save configuration sucessfully!
peixxfnh@DarkUbuntu:~/h3c802.1xClient$ sudo ./linux1x
Please enter your user name (less than 128 characters):俺用户名
Please enter your password (less than 64 characters):
start 802.1X authentication
device check
server check
pass authentication
proxy check on
multi-network-card check on
http proxy check on
竟然成功了。。。
哪个大大知道上面选项的意思可以帮助说明下吗?
sudo ./linux1x -c
The way to initialize 802.1X authentication.......:multicast
Send all packets by multicast.....................:N
Refresh IP address after connecting...............:Y
Save message and package to log...................:N
Continue to configure your network connection arguments?(Y/N)
y
There are two ways to initialize 802.1X authentication:
1. Trap by broadcast.
2. Trap by multicast.
Please choose the way to initialize the 802.1X authentication :
1
Send all packets by multicast? (Y/N):
y
Refresh your IP address after connecting? (Y/N):
n
Save message and package to log?(Y/N):
n
Configuration has finished, do you want to save it?(Y/N)
y
Save configuration sucessfully!
就是这里设置的~