貌似可以连 却上不了网 高手帮下忙

[wang15427]

用wvdial拨号后
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: AT+CGDCONT=1,"IP","cmwap"
OK
--> Sending: ATQ0 V1 E1 S0=0
OK
--> Modem initialized.
--> Sending: ATDT*99***1#*
--> Waiting for carrier.
ATDT*99***1#*
CONNECT
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Thu May 7 12:48:36 2009
--> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
--> --> PAP (Password Authentication Protocol) may be flaky.
--> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
--> --> CHAP (Challenge Handshake) may be flaky.
--> Pid of pppd: 3766
--> Using interface ppp0
--> pppd: 臵 P
--> pppd: 臵 P
--> pppd: 臵 P
--> pppd: 臵 P
--> pppd: 臵 P
--> local IP address 10.201.37.204
--> pppd: 臵 P
--> remote IP address 192.200.1.21
--> pppd: 臵 P
--> primary DNS address 211.136.20.203
--> pppd: 臵 P
--> secondary DNS address 218.201.96.130
--> pppd: 臵 P
^CCaught signal 2: Attempting to exit gracefully...
--> Terminating on signal 15
--> pppd: 臵 P
--> Connect time 3.0 minutes.
--> pppd: 臵 P
--> pppd: 臵 P
--> pppd: 臵 P
--> Disconnecting at Thu May 7 12:51:34 2009
administrator@ubuntu:~$ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: AT+CGDCONT=1,"IP","cmwap"
OK
--> Sending: ATQ0 V1 E1 S0=0
ATQ0 V1 E1 S0=0
OK
--> Modem initialized.
--> Sending: ATDT*99***1#*
--> Waiting for carrier.
ATDT*99***1#*
CONNECT
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Thu May 7 12:52:20 2009
--> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
--> --> PAP (Password Authentication Protocol) may be flaky.
--> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
--> --> CHAP (Challenge Handshake) may be flaky.
--> Pid of pppd: 4023
--> Using interface ppp0
--> pppd: ��� P��
--> pppd: ��� P��
--> pppd: ��� P��
--> pppd: ��� P��
--> pppd: ��� P��
--> local IP address 10.201.167.92
--> pppd: ��� P��
--> remote IP address 192.200.1.21
--> pppd: ��� P��
--> primary DNS address 211.136.20.203
--> pppd: ��� P��
--> secondary DNS address 218.201.96.130
--> pppd: ��� P��
ping 211.136.20.203
-----断开了之后出现提示 Caught signal 2: Attempting to exit gracefully...
--> Terminating on signal 15
--> pppd: ��� P��
--> Connect time 2.8 minutes.
--> pppd: ��� P��
--> pppd: ��� P��
--> pppd: ��� P��
--> Disconnecting at Thu May 7 12:55:06 2009
这是连接信息



我的wvdial。conf是

[Dialer Defaults]
Init1 = AT+CGDCONT=1,"IP","cmwap"
Init2 = ATQ0 V1 E1 S0=0
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = *99***1#*
Modem = /dev/ttyACM0
Username = any
Password = any
Baud = 460800


不明白是怎么回事 麻烦高手 助人为乐么 呵呵

我的网卡是拓实科技的 t296 --貌似~~!笔记本的无线网卡 谢谢 再次Thank You!!

[apn]

pppd要sudo权限
sudo wvdial 就可以了

[xiaoyong]

交叉引用， viewtopic.php?f=116&t=204159&p=1283796#p1283796

[wang15427]

以前可以的 现在是怎么回事就不知道了
真是可怜 没法装了 真失败啊 我再试试 好了发给大家
大家成功了也别吝啬啊