求助，校园网的锐捷认证

[zyf2011]

我用的锐捷认证老是失败
yufeng@yufeng-laptop:~/ruanjian/Ruijie$ sudo ifconfig eth0 ***.***.***.***
yufeng@yufeng-laptop:~/ruanjian/Ruijie$ sudo xrgsu
XRGSupplicant 1.1.1
Ruijie Network CopyRight 2004-2005
Please input your user name:********
Please input your password:
Use DHCP,1-Use,0-UnUse(Default: 0):1
You have 3 Nic:
0. eth0 Desc: (null)
1. wmaster0 Desc: (null)
2. wlan0 Desc: (null)
Please select which NIC will be used(0-2,Default:0)0
Use default auth parameter,0-Use 1-UnUse(Default: 0):0
Searching server...
Connecting server...
Authenticating...

������ʹ�õĿͻ�������!
Authenticate FAIL!
xrgsu exit!
大家帮我看看这是怎么回事啊，我们学校的现在在win下用锐捷3.35的版本认证，我在网上找到的方法没有一个成功的

[tangyuancn]

我和楼主是一样的情况，我们学校也是用的windows下的锐捷3.35版，在ubuntu下连接老是认证失败 。
静等高手解决 。

[zyf2011]

我也用了mentohust，在用3.35的版本时却提示版本过低，用高的版本又认证不了，高手呢，给解决一下啊

[byZh]

Searching server...
Connecting server...
Authenticating...

������ʹ�õĿͻ�������!
Authenticate FAIL!
xrgsu exit!
======
以前可以认证，现在变成上面这样子了~~郁闷

[zyf2011]

现在我在vista下抓了个包，用mentohust时自定义包在windows下认证时，提示认证成功，但是在获得ip时，也就是很快就提示认证失败，好像抓一个包只能认证一次，但提示成功了实际上没有真正的认证通过，好像有个几秒的时间就提示认证失败，是不是还要改点东西啊，希望高手给提示下啊

[bigeagle]

ruijieclient.googlecode.com
试试这个，这个比较好。西安电子科技大学 锐捷3.35版通过认证

[tangyuancn]

ruijieclient.googlecode.com
试试这个，这个比较好。西安电子科技大学 锐捷3.35版通过认证

楼上的哥们，还请把你的ruijie.conf贴出来参考参考，我怎么捣鼓都没有认证通过。

[julykitt]

lz是拿别人的帐号吧，
静态IP是sudo srgsu -a
动态是sudo srgsu -b
我推荐用ruijieclient，conf文件，自己看吧，就是该一个重要的地方，都有说明的。
比较早的版本
#This is a sample configuration file of mystar.
#Change it appropriately according to your actual settings.
#The lines starting with a '# 'or a '\n' mean comments and are ignored.

#user name & password
#Note: the content between '=' and '\n' is treated as a part of
# your name and password. so don't put some "space characters" before and
# after your name and password.
Name=0407052104_334
Password=0000
#authentication mode, 0 means standard mode, 1 means star-private-mode
AuthenticationMode=0

#which interface(NIC) to use ? usually it's eth0.
NIC=eth0

#echo interval, 4 seconds. usually between 1 and 100
#set it to 0 to DISABLE it
EchoInterval=4

#enable intelligent reconnect?
#Intelligent reconnecting means pinging your netgate every 2 seconds, and if
#pinging returns timeout, we will restart authentication.
#Note: this parameter is NOT supported and ignored NOW!
# 1 means enable, and 0 means disable
IntelligentReconnect=1

#fake version
FakeVersion=3.99

#(Since [network information center] has bound ip & account,
#normally, we should comment the line below

#fake MAC address
#FakeMAC=00:11:D8:44:D5:0D
#FakeMAC=00:8C:69:56:CE

#fake IP address
#FakeAddress=172.17.155.237

[zyf2011]

lz是拿别人的帐号吧，
静态IP是sudo srgsu -a
动态是sudo srgsu -b
我推荐用ruijieclient，conf文件，自己看吧，就是该一个重要的地方，都有说明的。
比较早的版本
#This is a sample configuration file of mystar.
#Change it appropriately according to your actual settings.
#The lines starting with a '# 'or a '\n' mean comments and are ignored.

#user name & password
#Note: the content between '=' and '\n' is treated as a part of
# your name and password. so don't put some "space characters" before and
# after your name and password.
Name=0407052104_334
Password=0000
#authentication mode, 0 means standard mode, 1 means star-private-mode
AuthenticationMode=0

#which interface(NIC) to use ? usually it's eth0.
NIC=eth0

#echo interval, 4 seconds. usually between 1 and 100
#set it to 0 to DISABLE it
EchoInterval=4

#enable intelligent reconnect?
#Intelligent reconnecting means pinging your netgate every 2 seconds, and if
#pinging returns timeout, we will restart authentication.
#Note: this parameter is NOT supported and ignored NOW!
# 1 means enable, and 0 means disable
IntelligentReconnect=1

#fake version
FakeVersion=3.99

#(Since [network information center] has bound ip & account,
#normally, we should comment the line below

#fake MAC address
#FakeMAC=00:11:D8:44:D5:0D
#FakeMAC=00:8C:69:56:CE

#fake IP address
#FakeAddress=172.17.155.237

不知你在哪找的3.99版本的啊，我怎么下的全市3.73版本的啊，我在vista下抓了包，但是在用mentohust在ubuntu下认证时自定义包时竟然提示版本过低，真是很郁闷，你现在可还有这个版本的源程序，传上来我也试试，现在我是没办法了，网上所有的方法我好像都试了，就是不行