代码: 全选
+------------------------------------------------------------------------------+
|* *|
|* Copyright (c) 2007, Silicon Integrated Systems Corp. All rights reserved. *|
|* *|
|* README file for SiS 190/191 Linux Driver *|
|* *|
+------------------------------------------------------------------------------+
June 01, 2007
Table of Contents
=================
Introduction
Limitations
Packaging
Requirement
Building Driver From Source File
Loading and Unloading Driver
Driver Settings
Introduction
============
This is the Linux device driver released for SiS190/191 Ethernet controllers,
which are listed as following.
1. SiS191 Gigabit Ethernet Controller (Integrated in SiS968/966 South Bridge)
2. SiS190 Fast Ethernet Controller (Integrated in SiS966L South Bridge)
Limitations
============
The current version of the driver has been tested on 2.6.x kernels.
The driver may not compile on kernels older than 2.4.x.
Testing is concentrated on i386 and x86_64 architectures.
Packaging
=========
Makefile : Makefile for building modules
README.TXT : This document
sis190.c : Driver source file
sis190.h : Driver header file
Requirement
===========
Linux 2.6.x kernel source or kernel header must be prepared for building object.
Building Driver From Source File
================================
make
make install (as root privilege)
depmod -a (as root privilege)
reboot
Loading and Unloading Driver
=============================
Loading:
modprobe sis190.ko
Unloading:
rmmod sis190
Driver Settings
===============
For debug purpose, you can get more messages via 'debug' parameter:
insmod sis190.ko debug=(2-4)
Tested O.S.
==========
FC6, RedFlag5.0NE, Ubuntu6.10, Suse10.1, Mandriva2007 and Red Hat Enterprise4 Update4 (07/11/2007)