当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 8 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : EDGE MODEM使用问题。
帖子发表于 : 2010-06-01 13:53 
头像

注册: 2009-10-31 21:57
帖子: 53
送出感谢: 0 次
接收感谢: 0 次
WIN下有驱动,CDROM模式安装完然后自动切换到MODEM模式

UBUNTU 下应该怎么做?

看到类似的http://forum.ubuntu.org.cn/viewtopic.php?f=116&t=264207
下载了回帖中的,umtsmon还是不行。

    Bus 007 Device 002: ID 0471:1237 Philips TalkTalk SNU5630NS/05 802.11bg
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

usb_modeswitch也试过。
    hzy@hzy-laptop:~/桌面$ usb_modeswitch -v 0471 -p 1237

    Looking for default devices ...
    Found default devices (1)
    Accessing device 000 on bus 007 ...
    Ambiguous Class/InterfaceClass: 0x02/0x08Using endpoints 0x03 (out) and 0x83 (in)
    Inquiring device details; driver will be detached ...
    Looking for active driver ...
    No driver found. Either detached before or never attached
    Could not claim interface (error -1). Skipping device inquiry
    Error: could not get description string "manufacturer"
    Error: could not get description string "product"
    Error: could not get description string "serial number"

    USB description data (for identification)
    -------------------------
    Manufacturer:
    Product:
    Serial No.:
    -------------------------
    Warning: no switching method given.
    -> Run lsusb to note any changes. Bye.

nquiring device details; driver will be detached ...
Looking for active driver ...
No driver found. Either detached before or never attached
这啥意思?没驱动?


页首
 用户资料  
 
2 楼 
 文章标题 : Re: EDGE MODEM使用问题。
帖子发表于 : 2010-06-01 14:19 
头像

注册: 2008-10-20 21:24
帖子: 371
送出感谢: 3
接收感谢: 1
我的方案是用WM手機的Internet共享,插上數據線就直接撥號,什麼都不用設置,ubuntu9.10就直接支持了。


_________________
一個憂國憂民的摩托車搭客仔


页首
 用户资料  
 
3 楼 
 文章标题 : Re: EDGE MODEM使用问题。
帖子发表于 : 2010-06-01 15:09 
头像

注册: 2009-10-31 21:57
帖子: 53
送出感谢: 0 次
接收感谢: 0 次
楼上的方案,伤手机,电池用的快,另外有专门的EDGE MODEM不用用手机,有点傻 :em06


页首
 用户资料  
 
4 楼 
 文章标题 : Re: EDGE MODEM使用问题。
帖子发表于 : 2010-06-01 15:31 
头像

注册: 2009-10-31 21:57
帖子: 53
送出感谢: 0 次
接收感谢: 0 次
hzy@hzy-laptop:~/桌面$ lsusb -v -s 007:002

Bus 007 Device 002: ID 0471:1237 Philips TalkTalk SNU5630NS/05 802.11bg
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0471 Philips
idProduct 0x1237 TalkTalk SNU5630NS/05 802.11bg
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 2
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 5
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC ACM:
bmCapabilities 0x07
sends break
line coding and serial state
get/set/clear comm features
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)


页首
 用户资料  
 
5 楼 
 文章标题 : Re: EDGE MODEM使用问题。
帖子发表于 : 2010-06-01 15:52 
头像

注册: 2009-10-31 21:57
帖子: 53
送出感谢: 0 次
接收感谢: 0 次
; Windows USB Modem Setup File
; Manufacturer: NXP Semicondutors

[Version]
Signature="$WINDOWS NT$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%MSFT%
DriverVer=03/03/2008,6.0.6000.16386

[Manufacturer]
%NXP% = NXP,NTx86,NTamd64

[NXP.NTx86]
%Modem% = Modem, USB\VID_0471&PID_1234
%Modem% = Modem, USB\VID_0471&PID_1217&Cdc_Modem

[NXP.NTamd64]
%Modem% = Modem, USB\VID_0471&PID_1234
%Modem% = Modem, USB\VID_0471&PID_1217&Cdc_Modem

[Modem.NTx86]
DriverVer=03/03/2008
include=mdmgl006.inf
AddReg=All,MCCI.AddReg,MCCI.AddReg32,USB
CopyFiles=FakeModemCopyFileSection

[Modem.NTamd64]
DriverVer=03/03/2008
include=mdmgl006.inf
AddReg=All,MCCI.AddReg,MCCI.AddReg64,USB
CopyFiles=FakeModemCopyFileSection64

[Modem.NTx86.Services]
AddService=NxpModem, 0x00000000, LowerFilter_Service_Inst

[Modem.NTamd64.Services]
AddService=NxpModem, 0x00000000, LowerFilter_Service_Inst64

[Modem.NTx86.HW]
AddReg=LowerFilterAddReg

[Modem.NTamd64.HW]
AddReg=LowerFilterAddReg

[LowerFilterAddReg]
HKR,,"LowerFilters",0x00010000,"NxpModem"

[LowerFilter_Service_Inst]
DisplayName="NXP USB Modem Driver"
ServiceType= 1
StartType = 3
ErrorControl = 0
ServiceBinary = %12%\nxpmdm.sys

[LowerFilter_Service_Inst64]
DisplayName="NXP USB Modem Driver"
ServiceType= 1
StartType = 3
ErrorControl = 0
ServiceBinary = %12%\nxpmdm64.sys

[FakeModemCopyFileSection]
nxpmdm.sys

[FakeModemCopyFileSection64]
nxpmdm64.sys

[DestinationDirs]
FakeModemCopyFileSection=12
DefaultDestDir = 12

[ControlFlags]
ExcludeFromSelect=PCMCIA\INTEL-FAX_9600-BA53
ExcludeFromSelect=PCMCIA\P.N.B-24/96_DATA/FAX_MODEM-0E11
ExcludeFromSelect=PCMCIA\COMPAQ-SpeedPaq_144/P-A4F8
ExcludeFromSelect=PCMCIA\COMPAQ-SPEEDPAQ_144/P-CC87
ExcludeFromSelect=PCMCIA\COMPAQ-SPEEDPAQ_144/P-CA72
ExcludeFromSelect=PCMCIA\COMPAQ-2400/9600_DATA_+_FAX-F9A7
ExcludeFromSelect=PCMCIA\COMPAQ-PCMCIA_14.4_DATA_+_FAX-48AC
ExcludeFromSelect=BIOS\*CPQA0D1
ExcludeFromSelect=BIOS\*PNPC003
ExcludeFromSelect=BIOS\*CPQA0D3
ExcludeFromSelect=PCMCIA\COMPAQ-SPEEDPAQ_192/P-0C92
ExcludeFromSelect=PCMCIA\COMPAQ-SPEEDPAQ_192-BC4E
ExcludeFromSelect=PCMCIA\COMPAQ-PCMCIA_28800_FAX/DATA_MODEM-C0B2
ExcludeFromSelect=PCMCIA\COMPAQ-SPEEDPAQ_192S-1549
ExcludeFromSelect=PCMCIA\DIGITAL-PCMCIA_14_400_V.32BIS_FAX-47D7
ExcludeFromSelect=PCMCIA\INTEL-DATAFAX_9624-0E7D
ExcludeFromSelect=PCMCIA\INTEL-DATAFAX_14.4-7462
ExcludeFromSelect=UNIMODEM882C325F
ExcludeFromSelect=UNIMODEM914F8102
ExcludeFromSelect=UNIMODEM6FC2012E
ExcludeFromSelect=UNIMODEM89D634E1
ExcludeFromSelect=SERENUM\MTS00B0
ExcludeFromSelect=*AZT4021
ExcludeFromSelect=PCMCIA\COMPAQ-MICROCOM_420_56K_PC_CARD_MODEM-DC0A
ExcludeFromSelect=PCMCIA\RIPICAB-RC288ACL-92B6
ExcludeFromSelect=UNIMODEMA18AD144
ExcludeFromSelect=UNIMODEM3D5C0504
ExcludeFromSelect=PCMCIA\NETELLIGENT_56K-PC_CARD_FAX_MODEM-6511
ExcludeFromSelect=PCMCIA\NETELLIGENT_56K-PC_CARD_FAX_MODEM-4108
ExcludeFromSelect=PCMCIA\COMPAQ_NETELLIGENT_56K_-PC_CARD_FAX_MODEM_-4365
ExcludeFromSelect=PCMCIA\COMPAQ-MICROCOM_420_V.90_K56FLEX_MODEM-5B95
ExcludeFromSelect=SERENUM\CPQ0415
; ExcludeFromSelect=SERENUM\CPQB0EA
ExcludeFromSelect=SERENUM\MNP0503
ExcludeFromSelect=MF\COMPAQC550_DEV0
ExcludeFromSelect=*CPQB05C
ExcludeFromSelect=USB\VID_1183&PID_4008
ExcludeFromSelect=*GVC0516
ExcludeFromSelect=*CPQA0C4
ExcludeFromSelect=USB\Vid_047e&Pid_bad1
ExcludeFromSelect=USB\Vid_06e0&Pid_f104
ExcludeFromSelect=cpq_modem59

[MCCI.AddReg32]
HKR,,NTMPDriver,,nxpmdm.sys

[MCCI.AddReg64]
HKR,,NTMPDriver,,nxpmdm64.sys

[MCCI.AddReg]
;HKR,,DevLoader,,*vcomm
HKR,,EnableSetClearFeatureIdle, 0x10001, 01,00,00,00
HKR,,OverrideDefaultPortSettings, 0x10001, 01,00,00,00
HKR,,InitialBaudRate, 0x10001, 00,08,07,00 ;115200 initial baud rate
HKR,,InitialLineControl,, "8N1" ;8-bits, No parity, 1 stop bit

HKR,, FriendlyDriver,,unimodem.vxd
HKR,, PortSubClass,1, 02
HKR,, ConfigDialog,, modemui.dll
HKR,, EnumPropPages,, "modemui.dll,EnumPropPages"
HKR,, FClass, 1, c3,00,00,00
HKR,,Properties, 1, 00,00,00,00, FF,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 31,00,00,00, 00,c2,01,00, 80,70,00,00
HKR,, DCB, 1, 1C,00,00,00, 00,08,07,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
;HKR,, VoiceProfile, 1,23,22,09,00
HKR, Fax, CL1FCS,, "2"

HKR, Init, 1,, "AT<cr>"
HKR, Init, 2,, "AT &F<cr>"
HKR, Init, 3,, "AT V1E0S0=0&D2&C1<cr>"
HKR, Init, 4,, "AT +CMEE=1<cr>"
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Answer, 1,, "ATA<cr>"
HKR, Hangup, 1,, "+++ATH<cr>"
HKR,, Reset,, "AT&F<cr>"
HKR,, InactivityScale, 1, 0A,00,00,00
HKR, Settings, CompatibilityFlags, 1, 01 ,00 ,00, 00
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, InactivityTimeout,, ""
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"


; DTE/DCE speeds will not be exact for generic modems because we will
; treat CONNECT ### as a DCE speed when some modems will report it as DTE.
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK - Command executed
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00 ; CONNECT - Connection
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING - Ring signal indicated
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR - Invalid command
HKR, Responses, "5<cr>", 1, 02, 00, B0,04,00,00, 00,00,00,00 ; CONNECT 1200
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE - No dial tone detected
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY - Engaged (busy) signal
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER

HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIAL TONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 2400<cr><lf>", 1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 4800<cr><lf>", 1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>", 1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 14400<cr><lf>", 1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>", 1, 02, 00, 00,4B,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 28800<cr><lf>", 1, 02, 00, 80,70,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 33600<cr><lf>", 1, 02, 00, 40,83,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>", 1, 02, 00, 00,96,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>", 1, 02, 00, 00,e1,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>", 1, 02, 00, 00,c2,01,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 230400<cr><lf>", 1, 02, 00, 00,84,03,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 460800<cr><lf>", 1, 02, 00, 00,08,07,00, 00,00,00,00
HKR, Responses, "<cr><lf>FAX<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DATA<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>VOICE<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RINGING<cr><lf>", 1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DELAYED<cr><lf>", 1, 1D, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DELAYED NUMBER<cr><lf>", 1, 1D, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BLACKLISTED<cr><lf>", 1, 1C, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BLACKLISTED NUMBER<cr><lf>", 1, 1C, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+FCERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>+CME ERROR: 0<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Phone failure.
HKR, Responses, "<cr><lf>+CME ERROR: 1<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; No connection to phone.
HKR, Responses, "<cr><lf>+CME ERROR: 2<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Phone modem link reserved.
HKR, Responses, "<cr><lf>+CME ERROR: 3<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Operation not permitted.
HKR, Responses, "<cr><lf>+CME ERROR: 4<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Operation not supported.
HKR, Responses, "<cr><lf>+CME ERROR: 5<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; PH-SIM card PIN required.
HKR, Responses, "<cr><lf>+CME ERROR: 6<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; PH-FSIM PIN required
HKR, Responses, "<cr><lf>+CME ERROR: 7<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; PH-FSIM PUK required
HKR, Responses, "<cr><lf>+CME ERROR: 10<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card not inserted.
HKR, Responses, "<cr><lf>+CME ERROR: 11<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card PIN required.
HKR, Responses, "<cr><lf>+CME ERROR: 12<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card PUK required.
HKR, Responses, "<cr><lf>+CME ERROR: 13<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card failure.
HKR, Responses, "<cr><lf>+CME ERROR: 14<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card busy.
HKR, Responses, "<cr><lf>+CME ERROR: 15<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card wrong.
HKR, Responses, "<cr><lf>+CME ERROR: 16<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Incorrect password.
HKR, Responses, "<cr><lf>+CME ERROR: 20<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Memory full.
HKR, Responses, "<cr><lf>+CME ERROR: 21<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Invalid index.
HKR, Responses, "<cr><lf>+CME ERROR: 22<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Not found.
HKR, Responses, "<cr><lf>+CME ERROR: 23<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Memory failure.
HKR, Responses, "<cr><lf>+CME ERROR: 24<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Text string too long.
HKR, Responses, "<cr><lf>+CME ERROR: 25<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Invalid character in text string.
HKR, Responses, "<cr><lf>+CME ERROR: 26<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Dial string too long.
HKR, Responses, "<cr><lf>+CME ERROR: 27<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Invalid character in dial string.
HKR, Responses, "<cr><lf>+CME ERROR: 30<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; No network service
HKR, Responses, "<cr><lf>+CME ERROR: 31<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Network timeout
HKR, Responses, "<cr><lf>+CME ERROR: 100<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Unknown.
HKR, Responses, "<cr><lf>+CMS ERROR: ", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; CMS errors

[EXTERNAL]
HKR,, DeviceType, 1, 01

[INTERNAL]
HKR,, DeviceType, 1, 02 ; Include ISA and Enhanced Comm Slot

[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"

[USB]
;HKR,,PortDriver,0,3ccport.vxd
;HKR,,DeviceType,1,02
HKR,, PortDriver, 0, wdmmdmld.vxd
HKR,, DeviceType, 1, 01


;---------------------------------------------------------------------------------
; Localizable area
;---------------------------------------------------------------------------------

[Strings]
MSFT = "Microsoft"
NXP = "Semiconductors"
Modem = "EDGE MODEM"


页首
 用户资料  
 
6 楼 
 文章标题 : Re: EDGE MODEM使用问题。
帖子发表于 : 2010-06-01 16:04 
头像

注册: 2009-10-31 21:57
帖子: 53
送出感谢: 0 次
接收感谢: 0 次
自己改了
usb-modeswitch.conf还是不行
引用:
########################################################
# Philips TalkTalk

DefaultVendor= 0x0471
DefaultProduct=0x1237

TargetVendor= 0x0471
TargetProduct= 0x1234

CheckSuccess=2

引用:
hzy@hzy-laptop:~/桌面$ sudo usb_modeswitch

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found default devices (1)
Accessing device 002 on bus 007 ...
Ambiguous Class/InterfaceClass: 0x02/0x08Using endpoints 0x03 (out) and 0x83 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached

SCSI inquiry data (for identification)
-------------------------
Vendor String: Philips
Model String: Dev. 0 LUN 0
Revision String: 1.0
-------------------------

USB description data (for identification)
-------------------------
Manufacturer: NXP Semiconductors
Product: Reference Design Dragonfly Platform
Serial No.: 000000-00-000000
-------------------------
Warning: no switching method given.

Checking for mode switch (max. 2 times, once per second) ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Original device still present after the timeout

Mode switch most likely failed. Bye.


附件:
捕获3.JPG
捕获3.JPG [ 29.46 KiB | 被浏览 2127 次 ]

捕获2.JPG
捕获2.JPG [ 28.59 KiB | 被浏览 2127 次 ]

页首
 用户资料  
 
7 楼 
 文章标题 : Re: EDGE MODEM使用问题。
帖子发表于 : 2010-06-01 16:21 
头像

注册: 2009-10-31 21:57
帖子: 53
送出感谢: 0 次
接收感谢: 0 次
之后用谷歌了一下,找到个这个
引用:
########################################################
# Philips TalkTalk (NXP Semiconductors "Dragonfly")
#

DefaultVendor= 0x0471
DefaultProduct= 0x1237

TargetVendor= 0x0471
TargetProduct= 0x1234

MessageContent="5553424312345678000000000000061b000000030000000000000000000000"


引用:
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found default devices (1)
Accessing device 006 on bus 007 ...
Ambiguous Class/InterfaceClass: 0x02/0x08Using endpoints 0x03 (out) and 0x83 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
No driver found. Either detached before or never attached

SCSI inquiry data (for identification)
-------------------------
Vendor String: Philips
Model String: Dev. 0 LUN 0
Revision String: 1.0
-------------------------

USB description data (for identification)
-------------------------
Manufacturer: NXP Semiconductors
Product: Reference Design Dragonfly Platform
Serial No.: 000000-00-000000
-------------------------
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x03 ...
OK, message successfully sent
-> Run lsusb to note any changes. Bye.


之后用USBSWITCH了以下,貌似成功了

lsusb之后还是Bus 007 Device 006: ID 0471:1237 Philips TalkTalk SNU5630NS/05 802.11bg

是不是缺少驱动?


页首
 用户资料  
 
8 楼 
 文章标题 : Re: EDGE MODEM使用问题。
帖子发表于 : 2010-06-01 17:20 
头像

注册: 2009-10-31 21:57
帖子: 53
送出感谢: 0 次
接收感谢: 0 次
我的神呐,一下午总算成功了
引用:
########################################################
# Philips TalkTalk (NXP Semiconductors "Dragonfly")
#

DefaultVendor= 0x0471
DefaultProduct=0x1237

TargetVendor= 0x0471
TargetProduct= 0x1234


# just the "eject" command
MessageContent="5553424312345678000000000000061b000000030000000000000000000000"


Configuration=2

CheckSuccess=10

引用:
hzy@hzy-laptop:~/桌面$ sudo usb_modeswitch

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found default devices (1)
Accessing device 002 on bus 007 ...
Ambiguous Class/InterfaceClass: 0x02/0x08Using endpoints 0x03 (out) and 0x83 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached

SCSI inquiry data (for identification)
-------------------------
Vendor String: Philips
Model String: Dev. 0 LUN 0
Revision String: 1.0
-------------------------

USB description data (for identification)
-------------------------
Manufacturer: NXP Semiconductors
Product: Reference Design Dragonfly Platform
Serial No.: 000000-00-000000
-------------------------
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x03 ...
OK, message successfully sent
Changing configuration to 2 ...
OK, configuration set

Checking for mode switch (max. 10 times, once per second) ...
Waiting for original device to vanish ...
Original device can't be accessed anymore. Good.
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Found correct target device

Mode switch succeeded. Bye.


:em09 :em09 :em09 :em09 Bus 007 Device 004: ID 0471:1234 Philips


下面就是拨号的问题了。
移动宽带那里貌似是不能用的。


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 8 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译