当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 3 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : Debian 无法驱动网卡.内详.向回帖的兄弟姐妹们敬礼了!
帖子发表于 : 2010-08-10 17:44 

注册: 2008-06-10 10:37
帖子: 30
地址: 贵州省石阡
送出感谢: 0 次
接收感谢: 0 次
1.系统情况: w7.系统,然后cd装的debian
2.分区情况见附件!
附件:
01.gif
01.gif [ 19.28 KiB | 被浏览 520 次 ]


3.硬件情况
计算机类型 联想 ThinkCentre XXXX X86兼容台式电脑
操作系统 Windows 7 Ultimate(32bit)
DirectX版本 11.0 (4.09.00.0904)
Internet Explorer8.0 (8.0.7600.16385)
计算机硬件:
处理器(CPU) Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
主板 联想 LENOVO
芯片组 英特尔 Q45/Q43 03
内存 2GB (Micron Technology PC3-8500F DDR3 SDRAM 1066MHz)
主硬盘 希捷 ST3320418AS(320GB, 7200转/分)
显卡 NVIDIA GeForce G100 (256 MB)
显示器 联想 LEN(17.1 英寸)
网卡 Intel(R) 82567LM-3 Gigabit Network Connection
声卡 SoundMAX Integrated Digital HD Audio
4.安装情况: C D E F 是 win 系统,其他是 debian
5.安装的时候没有办法识别网卡,出来一个列表我也没找到和我网卡相一致的,
我就选无网卡 继续安装了
6.进桌面 显示器提示:输入信号超出范围,
7.网卡一直不能驱动,没有网络.
8.sudo ifconfig -a
代码:
debian@debian:~$ su
密码:
debian:/home/debian# sudo ifconfig -a
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:63 errors:0 dropped:0 overruns:0 frame:0
          TX packets:63 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:21985 (21.4 KiB)  TX bytes:21985 (21.4 KiB)
debian:/home/debian# modprobe e1000e
debian:/home/debian# ifconfig -a
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:157 errors:0 dropped:0 overruns:0 frame:0
          TX packets:157 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:31261 (30.5 KiB)  TX bytes:31261 (30.5 KiB)

debian:/home/debian#

9.dmesg
代码:
[    0.083808] Capability LSM initialized
[    0.083817] Mount-cache hash table entries: 512
[    0.083907] Initializing cgroup subsys ns
[    0.083910] Initializing cgroup subsys cpuacct
[    0.083911] Initializing cgroup subsys devices
[    0.083924] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.083926] CPU: L2 cache: 3072K
[    0.083927] CPU: Physical Processor ID: 0
[    0.083928] CPU: Processor Core ID: 0
[    0.083931] Intel machine check architecture supported.
[    0.083933] Intel machine check reporting enabled on CPU#0.
[    0.083934] using mwait in idle threads.
[    0.083941] Checking 'hlt' instruction... OK.
[    0.100006] ACPI: Core revision 20080321
[    0.111486] ENABLING IO-APIC IRQs
[    0.111670] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.151284] CPU0: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz stepping 0a
[    0.152009] Booting processor 1/1 ip 6000
[    0.160010] Initializing CPU#1
[    0.160010] Calibrating delay using timer specific routine.. 5851.81 BogoMIPS (lpj=11703633)
[    0.160010] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.160010] CPU: L2 cache: 3072K
[    0.160010] CPU: Physical Processor ID: 0
[    0.160010] CPU: Processor Core ID: 1
[    0.160010] Intel machine check architecture supported.
[    0.160010] Intel machine check reporting enabled on CPU#1.
[    0.240015] CPU1: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz stepping 0a
[    0.240015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.244015] Brought up 2 CPUs
[    0.244015] Total of 2 processors activated (11709.65 BogoMIPS).
[    0.244015] CPU0 attaching sched-domain:
[    0.244015]  domain 0: span 0-1
[    0.244015]   groups: 0 1
[    0.244015] CPU1 attaching sched-domain:
[    0.244015]  domain 0: span 0-1
[    0.244015]   groups: 1 0
[    0.244015] net_namespace: 660 bytes
[    0.244015] Booting paravirtualized kernel on bare hardware
[    0.244015] NET: Registered protocol family 16
[    0.244015] ACPI: bus type pci registered
[    0.244015] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 16
[    0.244015] PCI: MCFG area at f8000000 reserved in E820
[    0.244015] PCI: Using MMCONFIG for extended config space
[    0.244015] PCI: Using configuration type 1 for base access
[    0.244015] Setting up standard PCI resources
[    0.244015] ACPI: EC: Look up EC in DSDT
[    0.248015] ACPI: Interpreter enabled
[    0.248015] ACPI: (supports S0 S3 S4 S5)
[    0.248015] ACPI: Using IOAPIC for interrupt routing
[    0.252015] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.252015] PCI: Transparent bridge - 0000:00:1e.0
[    0.252015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.252015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[    0.252015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.256016] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.256016] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.256016] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.256016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.256016] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.256016] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.256016] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.256016] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.256016] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.260016] pnp: PnP ACPI init
[    0.260016] ACPI: bus type pnp registered
[    0.260016] pnp: PnP ACPI: found 13 devices
[    0.260016] ACPI: ACPI bus type pnp unregistered
[    0.260016] PnPBIOS: Disabled by ACPI PNP
[    0.260016] PCI: Using ACPI for IRQ routing
[    0.265206] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.265214] hpet0: 8 64-bit timers, 14318180 Hz
[    0.269167] ACPI: RTC can wake from S4
[    0.276092] system 00:01: ioport range 0x500-0x57f has been reserved
[    0.276095] system 00:01: ioport range 0x800-0x80f has been reserved
[    0.276099] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.276102] system 00:01: ioport range 0x1180-0x11bf has been reserved
[    0.276105] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.276108] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[    0.276112] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.276115] system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
[    0.276118] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.276123] system 00:01: iomem range 0xfed12000-0xfed12fff has been reserved
[    0.276126] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.276129] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[    0.276133] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.276136] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.276139] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.276142] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[    0.276145] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.307459] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
[    0.307459] PCI: Bridge: 0000:00:01.0
[    0.307459]   IO window: 2000-2fff
[    0.307459]   MEM window: 0xdd000000-0xdfffffff
[    0.307459]   PREFETCH window: 0x00000000e0000000-0x00000000efffffff
[    0.307459] PCI: Bridge: 0000:00:1e.0
[    0.307459]   IO window: disabled.
[    0.307459]   MEM window: disabled.
[    0.307459]   PREFETCH window: disabled.
[    0.307459] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.307459] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.307459] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.307459] NET: Registered protocol family 2
[    0.320961] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.321150] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.321379] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.323088] TCP: Hash tables configured (established 131072 bind 65536)
[    0.323089] TCP reno registered
[    0.330522] NET: Registered protocol family 1
[    0.330624] checking if image is initramfs... it is
[    0.507058] Switched to high resolution mode on CPU 1
[    0.509952] Switched to high resolution mode on CPU 0
[    0.651224] Freeing initrd memory: 6046k freed
[    0.651224] Simple Boot Flag at 0x36 set to 0x1
[    0.651600] audit: initializing netlink socket (disabled)
[    0.651600] type=2000 audit(1281458895.640:1): initialized
[    0.651600] highmem bounce pool size: 64 pages
[    0.651600] Total HugeTLB memory allocated, 0
[    0.651600] VFS: Disk quotas dquot_6.5.1
[    0.651600] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.651600] msgmni has been set to 1751
[    0.651600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.651600] io scheduler noop registered
[    0.651600] io scheduler anticipatory registered
[    0.651600] io scheduler deadline registered
[    0.651600] io scheduler cfq registered (default)
[    0.651600] pci 0000:01:00.0: Boot video device
[    0.651600] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.651600] assign_interrupt_mode Found MSI capability
[    0.651600] Allocate Port Service[0000:00:01.0:pcie00]
[    0.651600] Allocate Port Service[0000:00:01.0:pcie03]
[    0.651600] isapnp: Scanning for PnP cards...
[    1.003600] isapnp: No Plug & Play device found
[    1.006014] hpet_resources: 0xfed00000 is busy
[    1.006054] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.006175] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.006494] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.006579] ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17
[    1.006633] 0000:00:03.3: ttyS1 at I/O 0x1c88 (irq = 17) is a 16550A
[    1.007422] brd: module loaded
[    1.007476] PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[    1.007478] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.007599] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.007599] mice: PS/2 mouse device common for all mice
[    1.007599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.007599] rtc0: alarms up to one month, y3k
[    1.007599] cpuidle: using governor ladder
[    1.007599] cpuidle: using governor menu
[    1.007599] No iBFT detected.
[    1.007599] TCP cubic registered
[    1.007599] NET: Registered protocol family 17
[    1.007599] Using IPI No-Shortcut mode
[    1.007599] registered taskstats version 1
[    1.007599] rtc_cmos 00:05: setting system clock to 2010-08-10 16:48:16 UTC (1281458896)
[    1.007680] Freeing unused kernel memory: 244k freed
[    1.027600] input: AT Translated Set 2 keyboard as /class/input/input0
[    1.059601] ACPI: SSDT 7EEBF887, 021F (r1 LENOVO TC-5C         139 INTL 20050228)
[    1.059601] ACPI: SSDT 7EEBEE67, 067D (r1 LENOVO TC-5C         139 INTL 20050228)
[    1.059601] Monitor-Mwait will be used to enter C-1 state
[    1.059601] Monitor-Mwait will be used to enter C-2 state
[    1.063600] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    1.063600] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.063600] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.063600] ACPI: SSDT 7EEBFAA6, 01B0 (r1 LENOVO TC-5C         139 INTL 20050228)
[    1.063600] ACPI: SSDT 7EEBF4E4, 0085 (r1 LENOVO TC-5C         139 INTL 20050228)
[    1.063601] ------------[ cut here ]------------
[    1.063601] WARNING: at arch/x86/kernel/hpet.c:299 hpet_legacy_next_event+0x38/0x5a()
[    1.063601] Modules linked in: processor(+) fan thermal_sys
[    1.063601] Pid: 0, comm: swapper Not tainted 2.6.26-2-686 #1
[    1.063601]  [<c0122633>] warn_on_slowpath+0x40/0x66
[    1.063601]  [<c0134642>] ktime_get+0xd/0x21
[    1.063601]  [<c010f9eb>] apic_wait_icr_idle+0xe/0x15
[    1.063601]  [<c01190b2>] __resched_task+0x5c/0x5f
[    1.063601]  [<c010f9eb>] apic_wait_icr_idle+0xe/0x15
[    1.063601]  [<c01190b2>] __resched_task+0x5c/0x5f
[    1.063601]  [<c011b733>] try_to_wake_up+0xe8/0xf1
[    1.063601]  [<c01377b6>] clocksource_get_next+0x39/0x3f
[    1.063601]  [<c01367ae>] update_wall_time+0x519/0x68f
[    1.063601]  [<c0118511>] __wake_up_common+0x2e/0x58
[    1.063601]  [<c01140e3>] hpet_legacy_next_event+0x38/0x5a
[    1.063601]  [<c01388c0>] clockevents_program_event+0xc4/0xd2
[    1.063601]  [<c01395c2>] tick_dev_program_event+0x1e/0x82
[    1.063601]  [<c0139048>] tick_broadcast_set_event+0xf/0x11
[    1.063601]  [<c01392d2>] tick_broadcast_oneshot_control+0x8a/0xda
[    1.063601]  [<c0138d1e>] tick_notify+0x1cf/0x2e5
[    1.063601]  [<c0129b1f>] get_next_timer_interrupt+0x142/0x1aa
[    1.063601]  [<c0135004>] notifier_call_chain+0x2a/0x47
[    1.063601]  [<c0135048>] raw_notifier_call_chain+0x9/0xc
[    1.063601]  [<c01387c0>] clockevents_notify+0x19/0x55
[    1.063601]  [<f885a18e>] acpi_idle_enter_simple+0x89/0x203 [processor]
[    1.063601]  [<c024a18d>] cpuidle_idle_call+0x5b/0x86
[    1.063601]  [<c024a132>] cpuidle_idle_call+0x0/0x86
[    1.063601]  [<c01025d3>] cpu_idle+0xb0/0xd0
[    1.063601]  =======================
[    1.063601] ---[ end trace 3cf7169d257728ec ]---
[    1.063688] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    1.063710] ACPI: ACPI0007:01 is registered as cooling_device1
[    1.063712] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.063601] Marking TSC unstable due to: TSC halts in idle.
[    1.216537] usbcore: registered new interface driver usbfs
[    1.216537] usbcore: registered new interface driver hub
[    1.216537] usbcore: registered new device driver usb
[    1.224538] USB Universal Host Controller Interface driver v3.0
[    1.224538] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.224538] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    1.224538] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.224538] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.224538] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[    1.224538] usb usb1: configuration #1 chosen from 1 choice
[    1.224538] hub 1-0:1.0: USB hub found
[    1.224538] hub 1-0:1.0: 2 ports detected
[    1.258770] No dock devices found.
[    1.262771] SCSI subsystem initialized
[    1.274318] libata version 3.00 loaded.
[    1.287973] Floppy drive(s): fd0 is 1.44M
[    1.306760] FDC 0 is a post-1991 82077
[    1.330787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.330787] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.330787] usb usb1: Product: UHCI Host Controller
[    1.330787] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    1.330787] usb usb1: SerialNumber: 0000:00:1a.0
[    1.330787] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[    1.330787] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    1.330787] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.330787] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    1.330787] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001860
[    1.330787] usb usb2: configuration #1 chosen from 1 choice
[    1.330787] hub 2-0:1.0: USB hub found
[    1.330787] hub 2-0:1.0: 2 ports detected
[    1.434785] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.434785] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.434785] usb usb2: Product: UHCI Host Controller
[    1.434785] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    1.434785] usb usb2: SerialNumber: 0000:00:1a.1
[    1.434785] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[    1.434785] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[    1.434785] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.434785] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    1.434785] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001880
[    1.434785] usb usb3: configuration #1 chosen from 1 choice
[    1.434785] hub 3-0:1.0: USB hub found
[    1.434785] hub 3-0:1.0: 2 ports detected
[    1.538775] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.538775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.538775] usb usb3: Product: UHCI Host Controller
[    1.538775] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    1.538775] usb usb3: SerialNumber: 0000:00:1a.2
[    1.538775] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.538775] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    1.538775] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.538775] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.538775] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[    1.538775] usb usb4: configuration #1 chosen from 1 choice
[    1.538775] hub 4-0:1.0: USB hub found
[    1.538775] hub 4-0:1.0: 2 ports detected
[    1.642775] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.642775] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.642775] usb usb4: Product: UHCI Host Controller
[    1.642775] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    1.642775] usb usb4: SerialNumber: 0000:00:1d.0
[    1.642775] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[    1.642775] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    1.642775] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.642775] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.642775] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[    1.642775] usb usb5: configuration #1 chosen from 1 choice
[    1.642775] hub 5-0:1.0: USB hub found
[    1.642775] hub 5-0:1.0: 2 ports detected
[    1.746785] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.746785] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.746785] usb usb5: Product: UHCI Host Controller
[    1.746785] usb usb5: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    1.746785] usb usb5: SerialNumber: 0000:00:1d.1
[    1.746785] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    1.746785] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    1.746785] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.746785] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    1.746785] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[    1.746785] usb usb6: configuration #1 chosen from 1 choice
[    1.746785] hub 6-0:1.0: USB hub found
[    1.746785] hub 6-0:1.0: 2 ports detected
[    1.849787] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.849791] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.849793] usb usb6: Product: UHCI Host Controller
[    1.849796] usb usb6: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    1.849798] usb usb6: SerialNumber: 0000:00:1d.2
[    1.850275] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    1.850275] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    1.850275] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.850275] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[    1.854340] ehci_hcd 0000:00:1a.7: debug port 1
[    1.854340] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    1.854340] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc228000
[    1.866371] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    1.866429] usb usb7: configuration #1 chosen from 1 choice
[    1.866458] hub 7-0:1.0: USB hub found
[    1.866464] hub 7-0:1.0: 6 ports detected
[    1.970228] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.970231] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.970234] usb usb7: Product: EHCI Host Controller
[    1.970236] usb usb7: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[    1.970238] usb usb7: SerialNumber: 0000:00:1a.7
[    1.973362] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
[    1.973362] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    1.973362] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.973362] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    1.974340] ehci_hcd 0000:00:1d.7: debug port 1
[    1.974340] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    1.974340] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfc229000
[    1.986972] usb 5-1: new low speed USB device using uhci_hcd and address 2
[    1.998360] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    1.998416] usb usb8: configuration #1 chosen from 1 choice
[    1.998435] hub 8-0:1.0: USB hub found
[    1.998439] hub 8-0:1.0: 6 ports detected
[    2.057156] hub 5-0:1.0: unable to enumerate USB device on port 1
[    2.105098] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    2.105102] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.105104] usb usb8: Product: EHCI Host Controller
[    2.105107] usb usb8: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[    2.105109] usb usb8: SerialNumber: 0000:00:1d.7
[    2.105161] ahci 0000:00:1f.2: version 3.0
[    2.105187] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[    2.640140] usb 5-1: new low speed USB device using uhci_hcd and address 3
[    2.807840] usb 5-1: configuration #1 chosen from 1 choice
[    2.810186] usb 5-1: New USB device found, idVendor=04b3, idProduct=310c
[    2.810190] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.810193] usb 5-1: Product: USB Optical Mouse
[    2.818340] usbcore: registered new interface driver hiddev
[    2.833568] input: USB Optical Mouse as /class/input/input1
[    2.833568] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
[    2.833568] usbcore: registered new interface driver usbhid
[    2.833568] usbhid: v2.6:USB HID core driver
[    3.107809] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xd impl SATA mode
[    3.107813] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part
[    3.107819] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    3.110837] scsi0 : ahci
[    3.110837] scsi1 : ahci
[    3.110837] scsi2 : ahci
[    3.110837] scsi3 : ahci
[    3.110837] scsi4 : ahci
[    3.110838] scsi5 : ahci
[    3.110838] ata1: SATA max UDMA/133 abar m2048@0xfc22a000 port 0xfc22a100 irq 222
[    3.110838] ata2: DUMMY
[    3.110838] ata3: SATA max UDMA/133 abar m2048@0xfc22a000 port 0xfc22a200 irq 222
[    3.110838] ata4: SATA max UDMA/133 abar m2048@0xfc22a000 port 0xfc22a280 irq 222
[    3.110838] ata5: DUMMY
[    3.110838] ata6: DUMMY
[    3.593455] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.593840] ata1.00: ATA-8: ST3320418AS, CC66, max UDMA/100
[    3.593840] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.595746] ata1.00: configured for UDMA/100
[    4.076289] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.076490] ata3.00: ATAPI: OPTIARC DVD-ROM DDU1681S, 1.93, max UDMA/100, ATAPI AN
[    4.079254] ata3.00: configured for UDMA/100
[    4.395655] ata4: SATA link down (SStatus 0 SControl 300)
[    4.395633] scsi 0:0:0:0: Direct-Access     ATA      ST3320418AS      CC66 PQ: 0 ANSI: 5
[    4.396870] scsi 2:0:0:0: CD-ROM            OPTIARC  DVD-ROM DDU1681S 1.93 PQ: 0 ANSI: 5
[    4.406341] Driver 'sd' needs updating - please use bus_type methods
[    4.406341] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[    4.406341] sd 0:0:0:0: [sda] Write Protect is off
[    4.406341] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.406341] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.406341] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[    4.406341] sd 0:0:0:0: [sda] Write Protect is off
[    4.406341] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.406355] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.406358]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    4.428376]  sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > sda3
[    4.505417] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.513695] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    4.513695] Uniform CD-ROM driver Revision: 3.20
[    4.513695] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.519444] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.519444] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    4.903692] PM: Starting manual resume from disk
[    4.915962] kjournald starting.  Commit interval 5 seconds
[    4.915962] EXT3-fs: mounted filesystem with ordered data mode.
[    5.685748] udevd version 125 started
[    5.908586] Linux agpgart interface v0.103
[    6.431073] input: Power Button (FF) as /class/input/input2
[    6.435740] ACPI: Power Button (FF) [PWRF]
[    6.435843] input: Power Button (CM) as /class/input/input3
[    6.439515] ACPI: Power Button (CM) [PWRB]
[    6.447732] ACPI: WMI: Mapper loaded
[    6.593132] input: PC Speaker as /class/input/input4
[    6.604761] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    6.604761] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[    6.675892] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[    6.675892] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[    7.352365] Adding 2650684k swap on /dev/sda10.  Priority:-1 extents:1 across:2650684k
[    7.587903] EXT3 FS on sda3, internal journal
[    8.258921] loop: module loaded
[    9.169261] kjournald starting.  Commit interval 5 seconds
[    9.169405] EXT3 FS on sda12, internal journal
[    9.169405] EXT3-fs: mounted filesystem with ordered data mode.
[    9.182700] kjournald starting.  Commit interval 5 seconds
[    9.183175] EXT3 FS on sda11, internal journal
[    9.183175] EXT3-fs: mounted filesystem with ordered data mode.
[    9.200385] kjournald starting.  Commit interval 5 seconds
[    9.200544] EXT3 FS on sda8, internal journal
[    9.200544] EXT3-fs: mounted filesystem with ordered data mode.
[    9.222754] kjournald starting.  Commit interval 5 seconds
[    9.223308] EXT3 FS on sda9, internal journal
[    9.223308] EXT3-fs: mounted filesystem with ordered data mode.
[   13.686347] NET: Registered protocol family 10
[   13.686347] lo: Disabled Privacy Extensions
[   15.835347] lp: driver loaded but no devices found
[   15.871367] ppdev: user-space parallel port driver
[  269.842146] usb 7-2: new high speed USB device using ehci_hcd and address 2
[  269.986184] usb 7-2: configuration #1 chosen from 1 choice
[  269.986184] usb 7-2: New USB device found, idVendor=0930, idProduct=6545
[  269.986184] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  269.986184] usb 7-2: Product: DataTraveler 2.0
[  269.986184] usb 7-2: Manufacturer: Kingston
[  269.986184] usb 7-2: SerialNumber: 5B820D00004C
[  270.054169] Initializing USB Mass Storage driver...
[  270.054169] scsi6 : SCSI emulation for USB Mass Storage devices
[  270.054173] usbcore: registered new interface driver usb-storage
[  270.054173] USB Mass Storage support registered.
[  270.054173] usb-storage: device found at 2
[  270.054173] usb-storage: waiting for device to settle before scanning
[  275.080293] usb-storage: device scan complete
[  275.107611] scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[  275.330074] sd 6:0:0:0: [sdb] 3903488 512-byte hardware sectors (1999 MB)
[  275.330621] sd 6:0:0:0: [sdb] Write Protect is off
[  275.330621] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  275.330621] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  275.334083] sd 6:0:0:0: [sdb] 3903488 512-byte hardware sectors (1999 MB)
[  275.335619] sd 6:0:0:0: [sdb] Write Protect is off
[  275.335619] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  275.335619] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  275.335619]  sdb: sdb4
[  275.377696] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  275.377696] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  275.726943] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
debian:/home/debian#



页首
 用户资料  
 
2 楼 
 文章标题 : Re: Debian 无法驱动网卡.内详.向回帖的兄弟姐妹们敬礼了!
帖子发表于 : 2010-08-10 17:45 
头像

注册: 2008-03-25 15:49
帖子: 25878
地址: 谁知道?
送出感谢: 8
接收感谢: 10
重复帖.
把 原来那个修改一下不就成了么 :em20


页首
 用户资料  
 
3 楼 
 文章标题 : Re: Debian 无法驱动网卡.内详.向回帖的兄弟姐妹们敬礼了!
帖子发表于 : 2010-08-10 17:48 

注册: 2008-06-10 10:37
帖子: 30
地址: 贵州省石阡
送出感谢: 0 次
接收感谢: 0 次
原来那个一直不出来我以为被删了.就重发了
IRC 上的朋友都说没看到,叫我重发


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 3 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 1 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译