ubuntu10.10 无线网卡已禁用,求高手帮助

包含网卡/无线网的网络问题和ADSL/校园网/宽带拨号支持及代理/共享等网络使用问题
xinghu
帖子: 37
注册时间: 2010-08-10 9:02
送出感谢: 1 次
接收感谢: 0

ubuntu10.10 无线网卡已禁用,求高手帮助

#1

帖子 xinghu » 2010-10-30 20:38

lenovo B450的本子,ralink rt3090 的无线网卡。

之前在ubuntu10.04下,安装的驱动 rt2860sta,表现完美。

今日升级到ubuntu10.10 后,无线网卡表示已禁用。重新安装驱动问题依旧。

已经折腾半个月,没有任何进展。痛苦不堪!

求高手帮助!
头像
wzssyqa
帖子: 4010
注册时间: 2008-04-07 17:36
来自: 泰安人在阜新
送出感谢: 0
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#2

帖子 wzssyqa » 2010-10-30 23:37

这么衰。。。
ldw5258
帖子: 8
注册时间: 2009-02-24 17:34
送出感谢: 0
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#3

帖子 ldw5258 » 2010-10-31 9:13

dmesg
将其中与网卡有关的信息印上来
xinghu
帖子: 37
注册时间: 2010-08-10 9:02
送出感谢: 1 次
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#4

帖子 xinghu » 2010-10-31 21:40

ldw5258 写了:dmesg
将其中与网卡有关的信息印上来

代码: 全选

[   18.116782] wlan0: ethernet device 00:26:82:3a:4f:97 using serialized NDIS driver: rt2860, version: 0x0, NDIS version: 0x500, vendor: 'IEEE 802.11 Wireless Card.', 1814:3090.5.conf
[   18.116813] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
感谢关注,我是linux新手,不知道这些信息少不少?我看到这里有个 wireless card 就给粘过来了
ChenNing2012
帖子: 5
注册时间: 2010-11-06 13:24
送出感谢: 0
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#5

帖子 ChenNing2012 » 2010-11-06 18:46

估计按下 开关 或着Fn+F5就可以了
ldw5258
帖子: 8
注册时间: 2009-02-24 17:34
送出感谢: 0
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#6

帖子 ldw5258 » 2010-11-09 22:10

xinghu 写了:
ldw5258 写了:dmesg
将其中与网卡有关的信息印上来

代码: 全选

[   18.116782] wlan0: ethernet device 00:26:82:3a:4f:97 using serialized NDIS driver: rt2860, version: 0x0, NDIS version: 0x500, vendor: 'IEEE 802.11 Wireless Card.', 1814:3090.5.conf
[   18.116813] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
感谢关注,我是linux新手,不知道这些信息少不少?我看到这里有个 wireless card 就给粘过来了
你给的信息太少.
我获得的信息:
以太网设备wlan0物理地址:00:26:82:3a:4f:97
使用串行NDIS驱动:rt2860 版本:0x0 ,NDIS版本:0x500
网卡规格:'IEEE 802.11
支持的加密模式:WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK

没有相关的错误信息
wylton
帖子: 22
注册时间: 2010-01-27 22:10
送出感谢: 0
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#7

帖子 wylton » 2010-11-16 21:35

dmesg | grep rt

请贴上面这个命令的信息。

还有 lspci, lsusb.
xinghu
帖子: 37
注册时间: 2010-08-10 9:02
送出感谢: 1 次
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#8

帖子 xinghu » 2010-11-17 9:06

wylton 写了:dmesg | grep rt

请贴上面这个命令的信息。

还有 lspci, lsusb.

好的,我晚上回去 贴上来
xinghu
帖子: 37
注册时间: 2010-08-10 9:02
送出感谢: 1 次
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#9

帖子 xinghu » 2010-11-17 22:26

wylton 写了:dmesg | grep rt

请贴上面这个命令的信息。

还有 lspci, lsusb.

dmesg | grep rt

代码: 全选

[    0.000000] Movable zone start PFN for each node
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] virtual kernel memory layout:
[    0.004306] mce: CPU supports 6 MCE banks
[    0.024009] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.197650] ACPI: (supports S0 S3 S4 S5)
[    0.211325] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.213572] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.213974] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.214066] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.214147] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.214229] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.214636] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.220198] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.525287] pcieport 0000:00:01.0: setting latency timer to 64
[    3.525326] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    3.525399] pcieport 0000:00:1c.0: setting latency timer to 64
[    3.525442] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    3.525524] pcieport 0000:00:1c.1: setting latency timer to 64
[    3.525566] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    3.557769] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.721278] ehci_hcd 0000:00:1a.7: debug port 1
[    3.725172] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    3.744010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.744133] hub 1-0:1.0: 6 ports detected
[    3.744278] ehci_hcd 0000:00:1d.7: debug port 1
[    3.748154] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    3.764009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.764112] hub 2-0:1.0: 6 ports detected
[    3.764408] hub 3-0:1.0: 2 ports detected
[    3.764664] hub 4-0:1.0: 2 ports detected
[    3.764918] hub 5-0:1.0: 2 ports detected
[    3.765156] hub 6-0:1.0: 2 ports detected
[    3.765394] hub 7-0:1.0: 2 ports detected
[    3.765627] hub 8-0:1.0: 2 ports detected
[    3.781678] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.781684] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.781687] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.781690] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.781693] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.781873] rtc_cmos 00:03: RTC can wake from S4
[    3.781909] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.781934] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    3.784172] Using IPI No-Shortcut mode
[    3.784639] rtc_cmos 00:03: setting system clock to 2010-11-17 22:13:06 UTC (1290031986)
[    4.105145] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.208783] udev[90]: starting version 163
[   12.505404] udev[399]: starting version 163
[   15.130308] Linux agpgart interface v0.103
[   17.051648] ndiswrapper: driver rt2860 (Ralink Technology, Corp.,07/06/2010, 3.01.08.0001) loaded
[   18.556701] wlan0: ethernet device 00:26:82:3a:4f:97 using serialized NDIS driver: rt2860, version: 0x0, NDIS version: 0x500, vendor: 'IEEE 802.11 Wireless Card.', 1814:3090.5.conf
[   18.556729] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   45.780704] ppdev: user-space parallel port driver
lspci:

代码: 全选

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G98M [GeForce G105M] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe
lsusb:

代码: 全选

Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0c45:6310 Microdia Sonix USB 2.0 Camera
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

希望能给点指点,非常感谢!
wylton
帖子: 22
注册时间: 2010-01-27 22:10
送出感谢: 0
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#11

帖子 wylton » 2010-11-18 5:00

我好久没用ndisdriver了。但你的信息里头没有出错的 信息。。
用样的网卡,论坛中已有人提问和解决过。你也可以试试。。是linux的驱动啊。。
viewtopic.php?t=260381


http://www.ralink.com.tw/support.php?s=2
这里是他的firmware,rt2860.bin
http://www.ralink.com.tw/license_us.php ... Jsc2JBPT1D

这是模块驱动
http://www.ralink.com.tw/license_us.php ... VmpJMkM%3D
你要编译。

这是别人编译调用的教程
http://cid-423fd80d7d86ebfa.spaces.live ... !237.entry

希望你能成功。
头像
hasee.wu
帖子: 2089
注册时间: 2009-10-20 21:13
来自: Pacific Western University
送出感谢: 0
接收感谢: 7 次

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#12

帖子 hasee.wu » 2010-11-18 6:10

试下

代码: 全选

sudo rmmod rt2860
sudo modprobe  rt2860sta
xinghu
帖子: 37
注册时间: 2010-08-10 9:02
送出感谢: 1 次
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#13

帖子 xinghu » 2010-11-18 9:22

wylton 写了:我好久没用ndisdriver了。但你的信息里头没有出错的 信息。。
用样的网卡,论坛中已有人提问和解决过。你也可以试试。。是linux的驱动啊。。
viewtopic.php?t=260381


http://www.ralink.com.tw/support.php?s=2
这里是他的firmware,rt2860.bin
http://www.ralink.com.tw/license_us.php ... Jsc2JBPT1D

这是模块驱动
http://www.ralink.com.tw/license_us.php ... VmpJMkM%3D
你要编译。

这是别人编译调用的教程
http://cid-423fd80d7d86ebfa.spaces.live ... !237.entry

希望你能成功。

非常感谢!晚上回去试一试
头像
hasee.wu
帖子: 2089
注册时间: 2009-10-20 21:13
来自: Pacific Western University
送出感谢: 0
接收感谢: 7 次

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#14

帖子 hasee.wu » 2010-11-18 9:54

代码: 全选

lsmod |grep  rt2860sta
如果没有结果,说明加载成rt2860了

rt3090 对应的模块应该是rt2860sta


rt2860sta在ubuntu 10.10中不用编译了。

不明白为什么楼主会忽略我在12楼的回复。
xinghu
帖子: 37
注册时间: 2010-08-10 9:02
送出感谢: 1 次
接收感谢: 0

Re: ubuntu10.10 无线网卡已禁用,求高手帮助

#15

帖子 xinghu » 2010-11-18 10:22

hasee.wu 写了:

代码: 全选

lsmod |grep  rt2860sta
如果没有结果,说明加载成rt2860了

rt3090 对应的模块应该是rt2860sta


rt2860sta在ubuntu 10.10中不用编译了。

不明白为什么楼主会忽略我在12楼的回复。

呵呵,不好意思!刚才忙,光顾着回复wylton了。

谢谢你的建议!

我晚上回去试一试,之后把结果贴出来。

再次感谢!
回复

回到 “网卡问题以及网络和拨号”