当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 1 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : UBUNTU10.10-华为EC1260何去何从!!
帖子发表于 : 2011-02-13 21:03 

注册: 2009-02-15 14:48
帖子: 1
送出感谢: 0 次
接收感谢: 0 次
本人有块华为EC1260无线上网卡,想在UBUNTU下使用,从网上搜了下,很多都是刷固件,我的EC1260固件是mobile partner,版本好像是16XXX,具体忘了,但我不想再刷了。
从网上搜到了中兴MU351在UBUNTU的使用方法,我想借鉴这个来搞EC1260,现在情况是:插上卡后用lsusb显示如下
gf@gf-SUPoX-AP48-GTR:~$ lsusb
Bus 008 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 008: ID 19d2:0003 ONDA Communication S.p.A.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
能看到EC1260,并且在“计算机”里也有HUAWEI SD Storage的图标,但没有存储卡的图标
我想修改中兴MU351 usb_modeswitch.conf文件的方法
sudo gedit /etc/usb_modeswitch.conf

# ZTE MU351
#
# Contributor: Dale Lane

DefaultVendor= 0x19d2;

DefaultProduct= 0x0003

# choose one of these:
DetachStorageOnly=0
MessageContent=5553424312345678000000000000061b000000020000000000000000000000

我将蓝色部分修改为EC1260的信息,保存后
usb_modeswitch -W
显示错误信息
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.4 (C) Josua Dietze 2010
* Based on libusb0 (0.1.12 and above)

! PLEASE REPORT NEW CONFIGURATIONS !

DefaultVendor= not set
DefaultProduct= not set
TargetVendor= not set
TargetProduct= not set
TargetClass= not set
TargetProductList=""

DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
MessageEndpoint= not set
MessageContent=""
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00

InquireDevice enabled (default)
Success check disabled
System integration mode disabled

usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 008
usb_os_find_busses: Found 007
usb_os_find_busses: Found 006
usb_os_find_busses: Found 005
usb_os_find_busses: Found 004
usb_os_find_busses: Found 003
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 003 on 008
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 001 on 008
error obtaining child information: Operation not permitted
error obtaining child information: Operation not permitted
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 001 on 007
error obtaining child information: Operation not permitted
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 001 on 006
error obtaining child information: Operation not permitted
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 001 on 005
error obtaining child information: Operation not permitted
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 001 on 004
error obtaining child information: Operation not permitted
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 008 on 003
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 001 on 003
error obtaining child information: Operation not permitted
error obtaining child information: Operation not permitted
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 001 on 002
error obtaining child information: Operation not permitted
usb_os_find_devices: couldn't get connect info
usb_os_find_devices: Found 001 on 001
error obtaining child information: Operation not permitted
No default vendor/product ID given. Aborting.
用dmesg,如下

[ 0.777017] pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.777020] pci 0000:00:1e.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.777031] alloc irq_desc for 16 on node -1
[ 0.777033] alloc kstat_irqs on node -1
[ 0.777037] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.777041] pci 0000:00:01.0: setting latency timer to 64
[ 0.777048] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.777051] pci 0000:00:1c.0: setting latency timer to 64
[ 0.777057] alloc irq_desc for 17 on node -1
[ 0.777059] alloc kstat_irqs on node -1
[ 0.777062] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.777065] pci 0000:00:1c.1: setting latency timer to 64
[ 0.777072] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.777075] pci 0000:00:1c.4: setting latency timer to 64
[ 0.777082] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.777086] pci 0000:00:1c.5: setting latency timer to 64
[ 0.777092] pci 0000:00:1e.0: setting latency timer to 64
[ 0.777095] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.777097] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.777099] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.777101] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.777103] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.777105] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.777107] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.777109] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.777111] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.777113] pci_bus 0000:02: resource 1 [mem 0xfd500000-0xfd5fffff]
[ 0.777115] pci_bus 0000:02: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
[ 0.777117] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.777119] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.777121] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.777124] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 0.777125] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.777128] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.777130] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.777132] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.777134] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.777136] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 0.777138] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.777140] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.777142] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.777144] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.777146] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.777148] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.777150] pci_bus 0000:06: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.777180] NET: Registered protocol family 2
[ 0.777312] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.778279] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.781036] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.781380] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.781382] TCP reno registered
[ 0.781395] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.781423] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.781537] NET: Registered protocol family 1
[ 0.781698] pci 0000:01:00.0: Boot video device
[ 0.781715] PCI: CLS 64 bytes, default 64
[ 0.781717] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.781719] Placing 64MB software IO TLB between ffff880001f9e000 - ffff880005f9e000
[ 0.781721] software IO TLB at phys 0x1f9e000 - 0x5f9e000
[ 0.781978] Scanning for low memory corruption every 60 seconds
[ 0.782086] audit: initializing netlink socket (disabled)
[ 0.782096] type=2000 audit(1297626012.770:1): initialized
[ 0.794558] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.795761] VFS: Disk quotas dquot_6.5.2
[ 0.795808] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.796247] fuse init (API version 7.14)
[ 0.796317] msgmni has been set to 7895
[ 0.796970] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.796973] io scheduler noop registered
[ 0.796975] io scheduler deadline registered
[ 0.797003] io scheduler cfq registered (default)
[ 0.797097] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.797115] alloc irq_desc for 40 on node -1
[ 0.797117] alloc kstat_irqs on node -1
[ 0.797125] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.797170] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.797195] alloc irq_desc for 41 on node -1
[ 0.797197] alloc kstat_irqs on node -1
[ 0.797203] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.797266] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.797292] alloc irq_desc for 42 on node -1
[ 0.797294] alloc kstat_irqs on node -1
[ 0.797299] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.797365] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.797390] alloc irq_desc for 43 on node -1
[ 0.797391] alloc kstat_irqs on node -1
[ 0.797397] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.797460] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.797485] alloc irq_desc for 44 on node -1
[ 0.797487] alloc kstat_irqs on node -1
[ 0.797493] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.797573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.797676] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.797741] intel_idle: MWAIT substates: 0x22220
[ 0.797743] intel_idle: does not run on family 6 model 23
[ 0.797823] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.797828] ACPI: Power Button [PWRB]
[ 0.797874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.797877] ACPI: Power Button [PWRF]
[ 0.797918] ACPI: Fan [FAN] (on)
[ 0.798134] ACPI: acpi_idle registered with cpuidle
[ 0.802021] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.802028] ACPI: Thermal Zone [THRM] (16 C)
[ 0.802075] ERST: Table is not found!
[ 0.802235] Linux agpgart interface v0.103
[ 0.802254] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.802341] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.802427] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.802677] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.802792] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.803727] brd: module loaded
[ 0.804136] loop: module loaded
[ 0.804273] ata_piix 0000:00:1f.2: version 2.13
[ 0.804285] alloc irq_desc for 19 on node -1
[ 0.804286] alloc kstat_irqs on node -1
[ 0.804292] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.804296] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.804328] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.804396] scsi0 : ata_piix
[ 0.804451] scsi1 : ata_piix
[ 0.804984] ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
[ 0.804988] ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
[ 0.805006] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.805011] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.805050] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.805101] scsi2 : ata_piix
[ 0.805143] scsi3 : ata_piix
[ 0.805585] ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19
[ 0.805589] ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19
[ 0.805642] pata_acpi 0000:04:00.1: enabling device (0000 -> 0001)
[ 0.805647] pata_acpi 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.805672] pata_acpi 0000:04:00.1: setting latency timer to 64
[ 0.805683] pata_acpi 0000:04:00.1: PCI INT B disabled
[ 0.805899] Fixed MDIO Bus: probed
[ 0.805925] PPP generic driver version 2.4.2
[ 0.805956] tun: Universal TUN/TAP device driver, 1.6
[ 0.805957] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.806021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.806034] alloc irq_desc for 18 on node -1
[ 0.806035] alloc kstat_irqs on node -1
[ 0.806039] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.806060] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.806063] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.806095] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.809996] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.810008] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 0.829860] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.829957] hub 1-0:1.0: USB hub found
[ 0.829961] hub 1-0:1.0: 6 ports detected
[ 0.830022] alloc irq_desc for 23 on node -1
[ 0.830024] alloc kstat_irqs on node -1
[ 0.830027] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.830037] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.830039] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.830066] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.833972] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.833984] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 0.842750] Freeing initrd memory: 10744k freed
[ 0.849873] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.849958] hub 2-0:1.0: USB hub found
[ 0.849962] hub 2-0:1.0: 6 ports detected
[ 0.850020] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.850031] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.850073] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.850078] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.850080] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.850105] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.850132] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 0.850218] hub 3-0:1.0: USB hub found
[ 0.850221] hub 3-0:1.0: 2 ports detected
[ 0.850269] alloc irq_desc for 21 on node -1
[ 0.850271] alloc kstat_irqs on node -1
[ 0.850275] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.850281] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.850284] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.850309] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.850335] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 0.850422] hub 4-0:1.0: USB hub found
[ 0.850425] hub 4-0:1.0: 2 ports detected
[ 0.850473] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.850477] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.850480] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.850509] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.850529] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
[ 0.850620] hub 5-0:1.0: USB hub found
[ 0.850623] hub 5-0:1.0: 2 ports detected
[ 0.850672] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.850677] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.850679] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.850704] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.850723] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 0.850810] hub 6-0:1.0: USB hub found
[ 0.850817] hub 6-0:1.0: 2 ports detected
[ 0.850865] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.850870] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.850872] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.850902] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.850922] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 0.851005] hub 7-0:1.0: USB hub found
[ 0.851008] hub 7-0:1.0: 2 ports detected
[ 0.851056] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.851061] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.851064] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.851093] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.851112] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 0.851198] hub 8-0:1.0: USB hub found
[ 0.851201] hub 8-0:1.0: 2 ports detected
[ 0.851305] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.854086] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.854091] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.854143] mice: PS/2 mouse device common for all mice
[ 0.854226] rtc_cmos 00:04: RTC can wake from S4
[ 0.854255] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.854276] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.854353] device-mapper: uevent: version 1.0.3
[ 0.854454] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.854677] device-mapper: multipath: version 1.1.1 loaded
[ 0.854679] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.855098] cpuidle: using governor ladder
[ 0.855100] cpuidle: using governor menu
[ 0.855314] TCP cubic registered
[ 0.855411] NET: Registered protocol family 10
[ 0.855684] lo: Disabled Privacy Extensions
[ 0.855837] NET: Registered protocol family 17
[ 0.856715] PM: Resume from disk failed.
[ 0.856725] registered taskstats version 1
[ 0.857028] Magic number: 15:100:698
[ 0.857113] rtc_cmos 00:04: setting system clock to 2011-02-13 19:40:13 UTC (1297626013)
[ 0.857120] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.857122] EDD information not available.
[ 0.873071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.160684] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.171316] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.510701] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.510720] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.570008] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 1.670051] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.670062] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.703873] ata1.01: ATAPI: SONY DVD-ROM DDU1675S, 1S00, max UDMA/33
[ 1.703883] ata1.01: applying bridge limits
[ 1.743883] ata1.01: configured for UDMA/33
[ 1.752498] scsi 0:0:1:0: CD-ROM SONY DVD-ROM DDU1675S 1S00 PQ: 0 ANSI: 5
[ 1.768845] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[ 1.768848] Uniform CD-ROM driver Revision: 3.20
[ 1.768939] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.768992] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.769071] Freeing unused kernel memory: 908k freed
[ 1.769246] Write protecting the kernel read-only data: 10240k
[ 1.769420] Freeing unused kernel memory: 412k freed
[ 1.769628] Freeing unused kernel memory: 1644k freed
[ 1.783383] udev[106]: starting version 163
[ 1.808401] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.808431] pata_jmicron 0000:04:00.1: setting latency timer to 64
[ 1.815220] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.815248] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.815299] r8169 0000:03:00.0: setting latency timer to 64
[ 1.815342] alloc irq_desc for 45 on node -1
[ 1.815344] alloc kstat_irqs on node -1
[ 1.815359] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
[ 1.815775] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xffffc9000067c000, 00:e0:4c:06:47:34, XID 1c4000c0 IRQ 45
[ 1.819062] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.819078] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.819111] r8169 0000:05:00.0: setting latency timer to 64
[ 1.819150] alloc irq_desc for 46 on node -1
[ 1.819151] alloc kstat_irqs on node -1
[ 1.819163] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[ 1.819587] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xffffc90000664000, 00:e0:4c:06:47:35, XID 1c4000c0 IRQ 46
[ 1.826229] Initializing USB Mass Storage driver...
[ 1.826894] scsi4 : pata_jmicron
[ 1.831257] scsi6 : pata_jmicron
[ 1.831777] ata5: PATA max UDMA/100 cmd 0x8f00 ctl 0x8e00 bmdma 0x8b00 irq 17
[ 1.831780] ata6: PATA max UDMA/100 cmd 0x8d00 ctl 0x8c00 bmdma 0x8b08 irq 17
[ 1.834833] ahci 0000:04:00.0: version 3.0
[ 1.834856] ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.840179] scsi5 : usb-storage 3-1:1.0
[ 1.840288] usbcore: registered new interface driver usb-storage
[ 1.840290] USB Mass Storage support registered.
[ 1.850072] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.850077] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.850084] ahci 0000:04:00.0: setting latency timer to 64
[ 1.850242] scsi7 : ahci
[ 1.850340] scsi8 : ahci
[ 1.850470] ata7: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 16
[ 1.850480] ata8: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 16
[ 1.863710] FDC 0 is a post-1991 82077
[ 2.200039] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.400019] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.401718] ata7.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 2.401721] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.403827] ata7.00: configured for UDMA/133
[ 2.420099] scsi 7:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
[ 2.420251] sd 7:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.420265] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 2.420308] sd 7:0:0:0: [sda] Write Protect is off
[ 2.420311] sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.420340] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.420511] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[ 2.541317] sd 7:0:0:0: [sda] Attached SCSI disk
[ 2.546072] firewire_ohci 0000:06:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.546078] firewire_ohci 0000:06:02.0: setting latency timer to 64
[ 2.710010] firewire_ohci: Added fw-ohci device 0000:06:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[ 2.845000] scsi 5:0:0:0: CD-ROM ZTE Corp CD-ROM 0.01 PQ: 0 ANSI: 0
[ 2.884981] sr1: scsi3-mmc drive: 52x/52x cd/rw tray
[ 2.885095] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 2.885444] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 3.183452] firewire_core: created device fw0: GUID 001106665000000d, S400
[ 3.457016] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 5.447241] udev[378]: starting version 163
[ 6.993882] parport_pc 00:0a: reported by Plug and Play ACPI
[ 6.993934] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.039164] EDAC MC: Ver: 2.1.0 Jan 21 2011
[ 7.088234] EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV 0000:00:00.0
[ 7.270148] ppdev: user-space parallel port driver
[ 7.273086] lp0: using parport0 (interrupt-driven).
[ 7.458181] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.458185] Disabling lock debugging due to kernel taint
[ 7.523072] [fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes.
[ 7.523325] [fglrx] vendor: 1002 device: 9442 count: 1
[ 7.523862] [fglrx] ioport: bar 4, base 0xce00, size: 0x100
[ 7.523877] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.523881] pci 0000:01:00.0: setting latency timer to 64
[ 7.524189] [fglrx] Kernel PAT support is enabled
[ 7.524208] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors
[ 7.646763] type=1400 audit(1297597220.283:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=542 comm="apparmor_parser"
[ 7.646775] type=1400 audit(1297597220.283:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=543 comm="apparmor_parser"
[ 7.647340] type=1400 audit(1297597220.283:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=542 comm="apparmor_parser"
[ 7.647352] type=1400 audit(1297597220.283:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=543 comm="apparmor_parser"
[ 7.647643] type=1400 audit(1297597220.283:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=542 comm="apparmor_parser"
[ 7.647657] type=1400 audit(1297597220.283:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=543 comm="apparmor_parser"
[ 7.648228] type=1400 audit(1297597220.283:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=530 comm="apparmor_parser"
[ 7.648802] type=1400 audit(1297597220.283:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=530 comm="apparmor_parser"
[ 7.649109] type=1400 audit(1297597220.283:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=530 comm="apparmor_parser"
[ 7.663333] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 7.973916] alloc irq_desc for 22 on node -1
[ 7.973919] alloc kstat_irqs on node -1
[ 7.973926] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.974004] alloc irq_desc for 47 on node -1
[ 7.974006] alloc kstat_irqs on node -1
[ 7.974014] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 7.974037] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.173234] hda_codec: ALC888: BIOS auto-probing.
[ 8.183370] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.183439] alloc irq_desc for 48 on node -1
[ 8.183441] alloc kstat_irqs on node -1
[ 8.183450] HDA Intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 8.183471] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 8.502539] usb 3-1: USB disconnect, address 2
[ 8.780754] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 9.320009] usb 3-1: device not accepting address 3, error -71
[ 9.440015] usb 3-1: new low speed USB device using uhci_hcd and address 4
[ 9.692514] usb 3-1: new low speed USB device using uhci_hcd and address 5
[ 10.113391] usb 3-1: device not accepting address 5, error -71
[ 10.230013] usb 3-1: new low speed USB device using uhci_hcd and address 6
[ 10.662509] usb 3-1: device not accepting address 6, error -71
[ 10.662524] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 10.679471] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 11.019287] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 11.534911] type=1400 audit(1297597224.173:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=926 comm="apparmor_parser"
[ 12.458832] r8169 0000:03:00.0: eth0: link down
[ 12.459243] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.482239] r8169 0000:05:00.0: eth1: link down
[ 12.482655] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.712962] audit_printk_skb: 18 callbacks suppressed
[ 12.712965] type=1400 audit(1297597225.353:18): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=968 comm="apparmor_parser"
[ 12.719135] type=1400 audit(1297597225.353:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=973 comm="apparmor_parser"
[ 12.833453] type=1400 audit(1297597225.463:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=970 comm="apparmor_parser"
[ 12.840555] type=1400 audit(1297597225.473:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=970 comm="apparmor_parser"
[ 12.845129] type=1400 audit(1297597225.473:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=970 comm="apparmor_parser"
[ 15.267180] alloc irq_desc for 49 on node -1
[ 15.267183] alloc kstat_irqs on node -1
[ 15.267192] fglrx_pci 0000:01:00.0: irq 49 for MSI/MSI-X
[ 15.267728] [fglrx] Firegl kernel thread PID: 1170
[ 15.267890] [fglrx] IRQ 49 Enabled
[ 18.750961] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro,commit=0
[ 18.763449] EXT4-fs (sda10): re-mounted. Opts: commit=0
[ 19.483203] [fglrx] Gart USWC size:1240 M.
[ 19.483206] [fglrx] Gart cacheable size:491 M.
[ 19.483210] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.483213] [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[ 19.483215] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 28.099692] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro,commit=0
[ 28.102312] EXT4-fs (sda10): re-mounted. Opts: commit=0
[ 29.515744] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 223.680013] usb 3-1: new full speed USB device using uhci_hcd and address 7
[ 223.858091] scsi9 : usb-storage 3-1:1.0
[ 224.970035] usb 3-1: USB disconnect, address 7
[ 225.250011] usb 3-1: new full speed USB device using uhci_hcd and address 8
[ 225.436928] scsi10 : usb-storage 3-1:1.4
[ 225.558780] usbcore: registered new interface driver usbserial
[ 225.558795] USB Serial support registered for generic
[ 225.558954] usbcore: registered new interface driver usbserial_generic
[ 225.558956] usbserial: USB Serial Driver core
[ 225.572709] USB Serial support registered for GSM modem (1-port)
[ 225.572774] option 3-1:1.0: GSM modem (1-port) converter detected
[ 225.573092] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 225.573113] option 3-1:1.1: GSM modem (1-port) converter detected
[ 225.573223] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 225.573240] option 3-1:1.2: GSM modem (1-port) converter detected
[ 225.573296] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 225.573312] option 3-1:1.3: GSM modem (1-port) converter detected
[ 225.573363] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
[ 225.573388] usbcore: registered new interface driver option
[ 225.573388] option: v0.7.2:USB Driver for GSM modems
[ 226.436769] scsi 10:0:0:0: Direct-Access ZTE Corp Flash Disk 0.01 PQ: 0 ANSI: 0
[ 226.439761] scsi 10:0:0:1: Direct-Access ZTE Corp TF Card Reader 0.01 PQ: 0 ANSI: 0
[ 226.440296] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 226.440599] sd 10:0:0:1: Attached scsi generic sg3 type 0
[ 226.476754] sd 10:0:0:0: [sdb] 124488 512-byte logical blocks: (63.7 MB/60.7 MiB)
[ 226.486754] sd 10:0:0:0: [sdb] Write Protect is off
[ 226.486757] sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 226.486760] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 226.510751] sd 10:0:0:1: [sdc] Attached SCSI removable disk
[ 226.536755] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 226.536761] sdb:
[ 226.558744] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 226.558748] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 262.433948] PPP BSD Compression module registered
[ 262.453741] PPP Deflate Compression module registered
[ 293.030011] usb 8-1: new full speed USB device using uhci_hcd and address 2
[ 293.204641] scsi11 : usb-storage 8-1:1.0
[ 294.040040] usb 8-1: USB disconnect, address 2
[ 298.210011] usb 8-1: new full speed USB device using uhci_hcd and address 3
[ 298.388760] option 8-1:1.0: GSM modem (1-port) converter detected
[ 298.388857] usb 8-1: GSM modem (1-port) converter now attached to ttyUSB4
[ 298.391242] option 8-1:1.1: GSM modem (1-port) converter detected
[ 298.391358] usb 8-1: GSM modem (1-port) converter now attached to ttyUSB5
[ 298.394894] option 8-1:1.2: GSM modem (1-port) converter detected
[ 298.395020] usb 8-1: GSM modem (1-port) converter now attached to ttyUSB6
[ 298.396595] scsi15 : usb-storage 8-1:1.3
[ 299.397119] scsi 15:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 0
[ 299.400115] scsi 15:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 299.429100] sr1: scsi-1 drive
[ 299.429229] sr 15:0:0:0: Attached scsi CD-ROM sr1
[ 299.429308] sr 15:0:0:0: Attached scsi generic sg4 type 5
[ 299.429573] sd 15:0:0:1: Attached scsi generic sg5 type 0
[ 299.509106] sd 15:0:0:1: [sdd] Attached SCSI removable disk

到底该如何设置usb_modeswitch.conf文件呢,以及拨号wvdial.conf设置呢?

本人小白,希望高人指点一二 :em20


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 1 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 2 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译