当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 2 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 求助,ubuntu 12.10 安装BCM57780网卡驱动
帖子发表于 : 2013-03-12 9:23 
头像

注册: 2013-02-08 11:37
帖子: 8
系统: ubuntu 12.10/win7
送出感谢: 0 次
接收感谢: 0 次
本人是小白,很多指令看不明白,现在ipcinfig没有eth0,只能用wifi,现在要装网卡驱动,求好心人帮助

下面附上read me安装部分
引用:
Driver Build Options
====================

This version of the tg3 driver contains support for Energy Efficient Ethernet.
The feature is on by default but can be disabled at compile time by adding
"TG3_EXTRA_DEFS=TG3_NO_EEE" to the make command line.


Installing Source RPM Package
=============================

The following are general guidelines for installing the driver.

1. Install the source RPM package:

rpm -ivh tg3-<version>.src.rpm

2. CD to the RPM path and build the binary driver for your kernel:

cd /usr/src/{redhat,OpenLinux,turbo,packages,rpm ..}

rpm -bb SPECS/tg3.spec

or

rpmbuild -bb SPECS/tg3.spec (for RPM version 4.x.x)

Note that the RPM path is different for different Linux distributions.

The driver will be compiled for the running kernel by default. To build
the driver for a kernel different than the running one, specify the
kernel by defining it in KVER:

rpmbuild -bb SPECS/tg3.spec --define "KVER <kernel version>"

where <kernel version> in the form of 2.x.y-z is the version of another
kernel that is installed on the system.

3. Install the newly built package (driver and man page):

rpm -ivh RPMS/<arch>/tg3-<version>.<arch>.rpm

<arch> is the architecture of the machine, e.g. i386:

rpm -ivh RPMS/i386/tg3-<version>.i386.rpm

Note that the --force option may be needed on some Linux distributions
if conflicts are reported.

The driver will be installed in the following path:

2.4.x kernels:

/lib/modules/<kernel_version>/kernel/drivers/net/tg3.o

2.6.x/3.x kernels:

/lib/modules/<kernel_version>/kernel/drivers/net/tg3.ko

4. Load the driver:

insmod tg3.o
or
insmod tg3.ko (on 2.6.x/3.x kernels)
or
modprobe tg3

5. To configure network protocol and address, refer to various Linux
documentations.


Building Driver From TAR File
=============================

The following are general guidelines for installing the driver.

1. Create a directory and extract the files:

tar xvzf tg3-<version>.tar.gz

2. Build the driver tg3.o (or tg3.ko) as a loadable module for the
running kernel:

cd src
make

The driver will be compiled for the running kernel by default. To build
the driver for a kernel different than the running one, specify the
kernel by defining it in KVER:

make KVER=<kernel version>

where <kernel version> in the form of 2.x.y-z is the version of another
kernel that is installed on the system.

3. Test the driver by loading it:

insmod tg3.o
or
insmod tg3.ko (on 2.6.x/3.x kernels)
or
insmod tg3

4. Install the driver:

make install

See RPM instructions above for the location of the installed driver.

5. To configure network protocol and address, refer to various Linux
documentations.


官方驱动程序也附上http://www.broadcom.com/support/license.php?file=570x/linux-3.124c.zip

希望大大们能帮我写出详细的安装指令,我感激不尽


页首
 用户资料  
 
2 楼 
 文章标题 : Re: 求助,ubuntu 12.10 安装BCM57780网卡驱动
帖子发表于 : 2013-03-13 12:24 
头像

注册: 2009-04-10 11:15
帖子: 721
地址: 三民主义国国民权利省我的选择市中共下台镇
送出感谢: 0 次
接收感谢: 14
firmware-brcm80211安了么?


_________________
强烈反对M$的ARM Secure Boot 锁定要求,大家请签名反对
http://www.fsf.org/campaigns/secure-boo ... cted-boot/


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 2 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 5 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译