当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 3 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 新人 求助 无法正常开启特效
帖子发表于 : 2008-01-21 17:20 

注册: 2008-01-21 17:01
帖子: 3
送出感谢: 0 次
接收感谢: 0 次
没想到我的第一帖就是求助贴........望达人 帮忙 谢谢
事情是 这样的,我的电脑开了特效后窗口的边框就会 消失,也就是说没有最小化,关闭之类的按钮,也没法调节窗口的大小。开到最强后自动会变成普通特效,然后出现上述情况。
我的笔记本是7400Go的,使用 受限驱动后就是这个样子的,在屏幕和显示选项里也无法测试显卡(test是灰色的)
已经重建过/etc/X11/xorg.conf
xorg.conf内容如下:

[/size]
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 12 14:29:35 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "通用显示器"
HorizSync 28.0 - 64.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection

Section "Device"
Identifier "nVidia Corporation G72M [GeForce Go 7400]"
Driver "nvidia"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G72M [GeForce Go 7400]"
Monitor "通用显示器"
DefaultDepth 16
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2008-01-21 18:51 

注册: 2006-12-02 17:32
帖子: 328
地址: Matrix,01帝国
送出感谢: 0 次
接收感谢: 0 次
参照帖子
http://forum.ubuntu.org.cn/viewtopic.ph ... piz+config


_________________
http://senhtry.blog.ubuntu.org.cn

Acer TravelMate 3272NWXCi
Intel Core 2 Duo T5500
Kingston 1G DDR2 667
nVidia Geforce Go 7300


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2008-01-22 9:46 

注册: 2008-01-21 17:01
帖子: 3
送出感谢: 0 次
接收感谢: 0 次
多谢!!!


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 3 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译