分页: 1 / 1
一不小心把menu.lst给删了...
发表于 : 2008-02-29 22:35
由 sir_wolf
一不小心把menu.lst给删了...
现在grub不能引导windows了。
哪个好心人把menu.lst里的内容贴一下
发表于 : 2008-02-29 22:38
由 arsui
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=dc44a89e-163e-448a-8c1e-c430b4c71624 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,6)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash vga=799
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=dc44a89e-163e-448a-8c1e-c430b4c71624 ro quiet splash vga=792
initrd /boot/initrd.img-2.6.22-14-generic
quiet
title Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=dc44a89e-163e-448a-8c1e-c430b4c71624 ro single
initrd /boot/initrd.img-2.6.22-14-generic
title Ubuntu 7.10, kernel 2.6.20-15-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=dc44a89e-163e-448a-8c1e-c430b4c71624 ro quiet splash vga=799
initrd /boot/initrd.img-2.6.20-15-generic
quiet
title Ubuntu 7.10, kernel 2.6.20-15-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=dc44a89e-163e-448a-8c1e-c430b4c71624 ro single
initrd /boot/initrd.img-2.6.20-15-generic
title Ubuntu 7.10, memtest86+
root (hd0,6)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title ------------THE--OTHERS----------------
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title The unuseful system
root (hd0,0)
savedefault
makeactive
chainloader +1
发表于 : 2008-02-29 22:38
由 skylarkwnl
我装了两个内核,你看着情况改把。
代码: 全选
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=746d4419-8fee-4bab-8d92-e5f7944951ee ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 7.10, kernel 2.6.22-14-rt
root (hd0,0)
kernel /vmlinuz-2.6.22-14-rt root=UUID=746d4419-8fee-4bab-8d92-e5f7944951ee ro quiet splash
initrd /initrd.img-2.6.22-14-rt
quiet
title Ubuntu 7.10, kernel 2.6.22-14-rt (recovery mode)
root (hd0,0)
kernel /vmlinuz-2.6.22-14-rt root=UUID=746d4419-8fee-4bab-8d92-e5f7944951ee ro single
initrd /initrd.img-2.6.22-14-rt
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,0)
kernel /vmlinuz-2.6.22-14-generic root=UUID=746d4419-8fee-4bab-8d92-e5f7944951ee ro quiet splash
initrd /initrd.img-2.6.22-14-generic
quiet
title Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root (hd0,0)
kernel /vmlinuz-2.6.22-14-generic root=UUID=746d4419-8fee-4bab-8d92-e5f7944951ee ro single
initrd /initrd.img-2.6.22-14-generic
title Ubuntu 7.10, memtest86+
root (hd0,0)
kernel /memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
发表于 : 2008-02-29 22:39
由 arsui
你不够我快
发表于 : 2008-02-29 23:31
由 iblicf
To re-generate /boot/grub/menu.lst
代码: 全选
sudo update-grub -y
发表于 : 2008-02-29 23:52
由 hcym
还是iblicf靠谱
发表于 : 2008-03-01 9:49
由 yaoms
iblicf 写了:To re-generate /boot/grub/menu.lst
代码: 全选
sudo update-grub -y
答非所问,严重轻视楼主的动手能力,哈哈
发表于 : 2008-03-01 10:36
由 chattan
yaoms 写了:iblicf 写了:To re-generate /boot/grub/menu.lst
代码: 全选
sudo update-grub -y
答非所问,严重轻视楼主的动手能力,哈哈
别人是新手呀`~~~不要这样打消别人的积极性!呵呵 ~~