当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 3 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 在登录界面前的那个“UBUNTU"进度条画面的分辨率怎么更改?
帖子发表于 : 2008-03-16 17:09 

注册: 2008-02-10 20:33
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
我的显示只支持1024.768的分辨率,在1280.1024分辨率下面严重变形。

登录界面下面通过修改/etc/X11/xorg.conf已经正常了。但登录界面前面那个进度条画面怎么更改分辨率啊??

我把xorg.conf和menu.lst 两个文件都贴上来,到底什么问题???

menu.lst
代码:
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      4

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=7ef30818-4324-48dc-9033-85da2cdf262c ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,2)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=zh_CN

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
# locale=zh_CN
## ## End Default Options ##

title      Ubuntu 7.10, kernel 2.6.22-14-generic
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=7ef30818-4324-48dc-9033-85da2cdf262c ro quiet splash locale=zh_CN
initrd      /boot/initrd.img-2.6.22-14-generic
quiet

title      Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=7ef30818-4324-48dc-9033-85da2cdf262c ro single
initrd      /boot/initrd.img-2.6.22-14-generic

title      Ubuntu 7.10, memtest86+
root      (hd0,2)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title      Microsoft Windows XP Professional
root      (hd0,0)
savedefault
makeactive
chainloader   +1


xorg.conf
代码:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "us"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"   "/dev/input/mice"
   Option      "Protocol"   "ImPS/2"
   Option      "ZAxisMapping"   "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "stylus"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "eraser"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "cursor"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "nVidia Corporation NV18 [GeForce4 MX 4000]"
   Driver      "nvidia"
   Busid      "PCI:2:0:0"
   Option      "AddARGBVisuals"   "True"
   Option      "AddARGBGLXVisuals"   "True"
   Option      "NoLogo"   "True"
EndSection

Section "Monitor"
   Identifier   "AF706"
   Option      "DPMS"
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "nVidia Corporation NV18 [GeForce4 MX 4000]"
   Monitor      "AF706"
   Defaultdepth   24
   SubSection "Display"
      Modes      "1024x768"   "800x600"   "720x400"   "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
  screen "Default Screen"
   Inputdevice   "Generic Keyboard"
   Inputdevice   "Configured Mouse"
   
   # Uncomment if you have a wacom tablet
   #   InputDevice     "stylus"   "SendCoreEvents"
   #   InputDevice     "cursor"   "SendCoreEvents"
   #   InputDevice     "eraser"   "SendCoreEvents"
EndSection
Section "Module"
   Load      "glx"
EndSection


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2008-03-16 17:14 
头像

注册: 2007-02-02 18:14
帖子: 30702
系统: debian sid
送出感谢: 1
接收感谢: 34
http://forum.ubuntu.org.cn/viewtopic.php?t=97805

看看


_________________
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2008-07-09 9:02 

注册: 2005-11-26 11:18
帖子: 37
地址: 洛水之阳
送出感谢: 0 次
接收感谢: 0 次
不知道问题解决了没有啊?我也遇到了这样的问题。
寻求解决方法,请朋友们帮忙,谢谢!


_________________
一学,二用,三创新……


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 3 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译