当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 5 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : [求助]安装VMware Tools提示没有找到软件包。
帖子发表于 : 2008-11-06 10:50 

注册: 2006-09-26 13:27
帖子: 70
送出感谢: 0 次
接收感谢: 0 次
vmware 5.5
ubuntu 8.10 i386

代码:
meng@meng-desktop:/cdrom$ dir
VMwareTools-5.5.0-18463.i386.rpm  VMwareTools-5.5.0-18463.tar.gz
meng@meng-desktop:/cdrom$ sudo apt-get install /cdrom/vmwaretools-5.5.0-18463.tar.gz
[sudo] password for meng:
正在读取软件包列表... 完成
正在分析软件包的依赖关系树       
正在读取状态信息... 完成       
E: 无法找到软件包
meng@meng-desktop:/cdrom$ sudo apt-get install /cdrom/vmwaretools-5.5.0-18463.i386.rpm
正在读取软件包列表... 完成
正在分析软件包的依赖关系树       
正在读取状态信息... 完成       
E: 无法找到软件包
meng@meng-desktop:/cdrom$


页首
 用户资料  
 
2 楼 
 文章标题 : Re: [求助]安装VMware Tools提示没有找到软件包。
帖子发表于 : 2008-11-08 15:33 

注册: 2006-09-26 13:27
帖子: 70
送出感谢: 0 次
接收感谢: 0 次
日,没有一个回复指出我的错误!

NND,WM5.5正式版 不支持U8.10

代码:
The path ":/usr/src/linux-headers-2.6.27-7/inclu" is not an existing directory.

What is the location of the directory of C header files that match your running
kernel? [/usr/src/linux/include] /usr/src/linux-headers-2.6.27-7/include

The path "/usr/src/linux-headers-2.6.27-7/include" is a kernel header file
directory, but it does not contain the file "linux/version.h" as expected.  This
can happen if the kernel has never been built, or if you have invoked the "make
mrproper" command in your kernel directory.  In any case, you may want to
rebuild your kernel.

What is the location of the directory of C header files that match your running
kernel? [/usr/src/linux/include] /usr/src/linux-headers-2.6.27-7-generic/include

The directory of kernel headers (version @@VMWARE@@ UTS_RELEASE) does not match
your running kernel (version 2.6.27-7-generic).  Even if the module were to
compile successfully, it would not load into the running kernel.


页首
 用户资料  
 
3 楼 
 文章标题 : Re: [求助]安装VMware Tools提示没有找到软件包。
帖子发表于 : 2008-11-08 17:19 

注册: 2006-09-26 13:27
帖子: 70
送出感谢: 0 次
接收感谢: 0 次
使用6.0.3的vmware tools安装包安装上了,不知道是不是我在这一步没有输入直接回车的原因,重启时,提示这一步,要按下回车才行。
代码:
Starting VMware Tools services in the virtual machine:
   Switching to guest configuration:

希望能找到解决办法,进入桌面后,鼠标不用热键来切换,共享文件不知道没有安装成功还是我没有找到地方。

安装记录,做个日后查找备用。
有的组件好像没有安装成功。
代码:
meng@meng-desktop:~/Download/vmware-tools-distrib$ sudo ./vmware-install.pl
A previous installation of VMware Tools has been detected.

The previous installation was made by the tar installer (version 3).

Keeping the tar3 installer database format.

Uninstalling the tar installation of VMware Tools.

Stopping VMware Tools services in the virtual machine:
   Guest operating system daemon:-ne                                   done


The removal of VMware Tools 5.5.0 build-18463 for Linux completed successfully.
Thank you for having tried this software.

Converting the tar3 installer database format to the tar4 installer database
format.

Installing VMware Tools.

In which directory do you want to install the binary files?
[/usr/bin]

What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc]

What is the directory that contains the init scripts?
[/etc/init.d]

In which directory do you want to install the daemon files?
[/usr/sbin]

In which directory do you want to install the library files?
[/usr/lib/vmware-tools]

The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]

In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]

The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]

The installation of VMware Tools 6.0.3 build-80004 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".

Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]


Stopping VMware Tools services in the virtual machine:
   Guest operating system daemon:                                      done
Trying to find a suitable vmmemctl module for your running kernel.

None of the pre-built vmmemctl modules for VMware Tools is suitable for your
running kernel.  Do you want this program to try to build the vmmemctl module
for your system (you need to have a C compiler installed on your system)?
[yes]

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.27-7-generic/build/include]

Extracting the sources of the vmmemctl module.

Building the vmmemctl module.

Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config0/vmmemctl-only'
make -C /lib/modules/2.6.27-7-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.27-7-generic'
  CC [M]  /tmp/vmware-config0/vmmemctl-only/os.o
/tmp/vmware-config0/vmmemctl-only/os.c: 在函数‘os_init’中:
/tmp/vmware-config0/vmmemctl-only/os.c:567: 错误: ‘struct proc_dir_entry’没有名为‘get_info’的成员
make[2]: *** [/tmp/vmware-config0/vmmemctl-only/os.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config0/vmmemctl-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.27-7-generic'
make: *** [vmmemctl.ko] 错误 2
make:离开目录“/tmp/vmware-config0/vmmemctl-only”
Unable to build the vmmemctl module.

The memory manager driver (vmmemctl module) is used by VMware host software to
efficiently reclaim memory from a virtual machine.
If the driver is not available, VMware host software may instead need to swap
guest memory to disk, which may reduce performance.
The rest of the software provided by VMware Tools is designed to work
independently of this feature.
If you want the memory management feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]

Trying to find a suitable vmhgfs module for your running kernel.

None of the pre-built vmhgfs modules for VMware Tools is suitable for your
running kernel.  Do you want this program to try to build the vmhgfs module for
your system (you need to have a C compiler installed on your system)? [yes]

Extracting the sources of the vmhgfs module.

Building the vmhgfs module.

Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config1/vmhgfs-only'
make -C /lib/modules/2.6.27-7-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.27-7-generic'
  CC [M]  /tmp/vmware-config1/vmhgfs-only/backdoor.o
  CC [M]  /tmp/vmware-config1/vmhgfs-only/backdoorGcc32.o
  CC [M]  /tmp/vmware-config1/vmhgfs-only/bdhandler.o
/tmp/vmware-config1/vmhgfs-only/bdhandler.c:15:27: error: asm/semaphore.h: 没有该文件或目录
make[2]: *** [/tmp/vmware-config1/vmhgfs-only/bdhandler.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config1/vmhgfs-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.27-7-generic'
make: *** [vmhgfs.ko] 错误 2
make:离开目录“/tmp/vmware-config1/vmhgfs-only”
Unable to build the vmhgfs module.

The filesystem driver (vmhgfs module) is used only for the shared folder
feature. The rest of the software provided by VMware Tools is designed to work
independently of this feature.
If you wish to have the shared folders feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]

pcnet32                39684  0
Unloading pcnet32 module

Trying to find a suitable vmxnet module for your running kernel.

None of the pre-built vmxnet modules for VMware Tools is suitable for your
running kernel.  Do you want this program to try to build the vmxnet module for
your system (you need to have a C compiler installed on your system)? [yes]

Extracting the sources of the vmxnet module.

Building the vmxnet module.

Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config2/vmxnet-only'
make -C /lib/modules/2.6.27-7-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.27-7-generic'
  CC [M]  /tmp/vmware-config2/vmxnet-only/vmxnet.o
  Building modules, stage 2.
  MODPOST 1 modules
WARNING: modpost: missing MODULE_LICENSE() in /tmp/vmware-config2/vmxnet-only/vmxnet.o
see include/linux/module.h for more information
  CC      /tmp/vmware-config2/vmxnet-only/vmxnet.mod.o
  LD [M]  /tmp/vmware-config2/vmxnet-only/vmxnet.ko
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.27-7-generic'
cp -f vmxnet.ko ./../vmxnet.o
make:离开目录“/tmp/vmware-config2/vmxnet-only”
The module loads perfectly in the running kernel.

update-initramfs: Generating /boot/initrd.img-2.6.27-7-generic
Trying to find a suitable vmblock module for your running kernel.

None of the pre-built vmblock modules for VMware Tools is suitable for your
running kernel.  Do you want this program to try to build the vmblock module
for your system (you need to have a C compiler installed on your system)?
[yes]

Extracting the sources of the vmblock module.

Building the vmblock module.

Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config2/vmblock-only'
make -C /lib/modules/2.6.27-7-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.27-7-generic'
  CC [M]  /tmp/vmware-config2/vmblock-only/linux/block.o
  CC [M]  /tmp/vmware-config2/vmblock-only/linux/control.o
/tmp/vmware-config2/vmblock-only/linux/control.c: 在函数‘SetupProcDevice’中:
/tmp/vmware-config2/vmblock-only/linux/control.c:139: 错误: ‘proc_root_fs’未声明(在此函数内第一次使用)
/tmp/vmware-config2/vmblock-only/linux/control.c:139: 错误: (即使在一个函数内多次出现,每个未声明的标识符在其
/tmp/vmware-config2/vmblock-only/linux/control.c:139: 错误: 所在的函数内也只报告一次。)
/tmp/vmware-config2/vmblock-only/linux/control.c: 在函数‘CleanupProcDevice’中:
/tmp/vmware-config2/vmblock-only/linux/control.c:199: 错误: ‘proc_root_fs’未声明(在此函数内第一次使用)
make[2]: *** [/tmp/vmware-config2/vmblock-only/linux/control.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config2/vmblock-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.27-7-generic'
make: *** [vmblock.ko] 错误 2
make:离开目录“/tmp/vmware-config2/vmblock-only”
Unable to build the vmblock module.

The vmblock module enables dragging or copying files from within a host and
dropping or pasting them onto your guest (host to guest drag and drop and file
copy/paste).  The rest of the software provided by VMware Tools is designed to
work independently of this feature (including guest to host drag and drop and
file copy/paste).

If you would like the host to guest drag and drop and file copy/paste features,
you can install the driver by running vmware-config-tools.pl again after making
sure that gcc, binutils, make and the kernel sources for your running kernel
are installed on your machine. These packages are available on your
distribution's installation CD.
[ Press Enter key to continue ]

[EXPERIMENTAL] The Virtual Machine Communication Interface (VMCI) service
provides a new communication capability with the Host, primarily for
development at the moment.  Would you like to enable this feature? [no]



Detected X.org version 0.0.0.



No drivers for X.org version: 0.0.0.


Please choose one of the following display sizes that X will start with (1 -
15):

[1]  "640x480"
[2]< "800x600"
[3]  "1024x768"
[4]  "1152x864"
[5]  "1280x800"
[6]  "1152x900"
[7]  "1280x1024"
[8]  "1376x1032"
[9]  "1400x900"
[10]  "1400x1050"
[11]  "1440x900"
[12]  "1680x1050"
[13]  "1600x1200"
[14]  "1920x1200"
[15]  "2364x1773"
Please enter a number between 1 and 15:

[2]

Starting VMware Tools services in the virtual machine:
   Switching to guest configuration:
                                                                       done
   Guest vmxnet fast network device:                                   done
   DMA setup:                                                          done
   Guest operating system daemon:                                      done

The configuration of VMware Tools 6.0.3 build-80004 for Linux for this running
kernel completed successfully.

You must restart your X session before any mouse or graphics changes take
effect.

You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.

To use the vmxnet driver, restart networking using the following commands:
/etc/init.d/networking stop
rmmod pcnet32
rmmod vmxnet
modprobe vmxnet
/etc/init.d/networking start

To make use of the virtual printer, you will need to restart the CUPS service

Enjoy,

--the VMware team


页首
 用户资料  
 
4 楼 
 文章标题 : Re: [求助]安装VMware Tools提示没有找到软件包。
帖子发表于 : 2008-11-08 17:48 

注册: 2008-11-08 17:42
帖子: 6
送出感谢: 0 次
接收感谢: 0 次
:em02 mingbaile!


页首
 用户资料  
 
5 楼 
 文章标题 : Re: [求助]安装VMware Tools提示没有找到软件包。
帖子发表于 : 2008-11-08 17:55 
头像

注册: 2005-09-10 16:04
帖子: 3537
地址: DG-GD-China
送出感谢: 0 次
接收感谢: 0 次
就没找到正确的板块,论坛不是有专门的虚拟机板块吗
LZ居然还用的是DOS的命令,dir,都给你列出来
去虚拟版块看看,什么都就明白了


_________________
http://element.blog.ubuntu.org.cn/
Ubuntu Jaunty Jackalope...
AMD Barton 2600+
MSI K7N2 Delta-L
Kingston DDR400 512M*2+256M*1
nVidia FX5200
Seagate 80G(Jaunty Jackalope)
Seagate 160G(XXxxXX)
SyncMaster 732N


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 5 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译