当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 6 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 新手请教显示器设置和分辨率设置问题
帖子发表于 : 2008-12-03 9:40 

注册: 2008-11-29 13:24
帖子: 6
送出感谢: 0 次
接收感谢: 0 次
我在ubuntu 8.1下安装了nvidia的驱动(for linux-x86-177.82) 问题是nvidia xserver setting 总是把我的显示器认成ctr, 屏幕大小只能是1024*768(我的显示器是 hp w2207) 我在xcorg.conf中修改了分辨率1680*1050 屏幕显示变成了超大的桌面 (就像1024*768 在 1680*1050里面游动) 请问怎么能够把显示器设置设置正确阿?


页首
 用户资料  
 
2 楼 
 文章标题 : Re: 新手请教显示器设置和分辨率设置问题
帖子发表于 : 2008-12-03 14:38 

注册: 2008-09-13 16:34
帖子: 243
送出感谢: 0 次
接收感谢: 0 次
应用程序--其他--显示器和显卡 在这里改


页首
 用户资料  
 
3 楼 
 文章标题 : Re: 新手请教显示器设置和分辨率设置问题
帖子发表于 : 2008-12-03 16:57 

注册: 2008-11-29 13:24
帖子: 6
送出感谢: 0 次
接收感谢: 0 次
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Tue Nov 4 14:07:17 PST 2008

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Mon Nov 3 08:46:46 UTC 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Module"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "LCD"
EndSection

Section "Monitor"

#VendorName "Unknown"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LCD"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
EndSection

Section "Device"
Identifier "LCD"
Driver "nvidia"
Option "NoLogo" "True"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GSO"
EndSection

Section "Screen"
Identifier "LCD"
Device "LCD"
Monitor "LCD"
DefaultDepth 24
EndSection

Section "Screen"

# Removed Option "TwinViewXineramaInfoOrder" "LCD"
# Removed Option "metamodes" "nvidia-auto-select @1680x1050 +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "LCD"
Option "metamodes" "1024x768 @1024x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

xong文件内容如上 小弟应该怎么改 才能让显示器变成液晶的 分辨率是1680x1050呢?


页首
 用户资料  
 
4 楼 
 文章标题 : Re: 新手请教显示器设置和分辨率设置问题
帖子发表于 : 2008-12-06 16:01 
头像

注册: 2008-05-02 19:50
帖子: 734
送出感谢: 0 次
接收感谢: 0 次
.....(省略)
Section "Monitor"
....(中间的省略)
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
.....(省略)
SubSection “Display”
Depth 16
Modes “1280×1024″ “1024×768″ “832×624″ “800×600″ “720×400″ “640×480″ (添加你要的分辨率)
EndSubSection

SubSection “Display”
Depth 24
Modes “1280×1024″ “1024×768″ “832×624″ “800×600″ “720×400″ “640×480″ (添加你要的分辨率)
......(省略)
EndSubSection


_________________
In a world without walls who needs Windows?


页首
 用户资料  
 
5 楼 
 文章标题 : Re: 新手请教显示器设置和分辨率设置问题
帖子发表于 : 2008-12-06 16:03 

注册: 2008-11-25 19:07
帖子: 57
送出感谢: 0 次
接收感谢: 0 次
Xorg无法找到你的显示器支持哪些分辨率
我遇到一种情况,在我使用一台显示器(gnr ts902)时Xorg只提供了640x480和320x480选项,显然这不是我想要的。将

Load "dpms"

加到xorg.conf的"Module" Section使我可以将LCD设置为(1280x1024为最佳模式)1024x768等分辨率。如果我早点发现这点的话,就用不着花好几天功夫尝试其他人的类似(和不类似)的解决方法...


_________________
代码:
rm  -rd /


页首
 用户资料  
 
6 楼 
 文章标题 : Re: 新手请教显示器设置和分辨率设置问题
帖子发表于 : 2008-12-06 16:38 

注册: 2008-11-29 13:24
帖子: 6
送出感谢: 0 次
接收感谢: 0 次
谢了 现在设置成功了
配置如下
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Mon Nov 3 08:46:46 UTC 2008


Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
Load "dpms"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"

# HorizSync source: builtin, VertRefresh source: builtin
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 30.0 - 110.0
VertRefresh 40.0 - 150.0
Option "dpms"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GSO"
EndSection

Section "Screen"

# Removed Option "metamodes" "nvidia-auto-select @1680x1050 +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1680x1050_60 +0+0; nvidia-auto-select @1680x1050 +0+0; 1680x1050 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 6 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译