求助扫描仪问题

重复贴和参考价值不大的帖子,版主维护
回复
dhssoes
帖子: 8
注册时间: 2008-12-15 10:48
送出感谢: 0
接收感谢: 0

求助扫描仪问题

#1

帖子 dhssoes » 2008-12-19 13:40

偶的扫描仪是清华紫光的A688,官方没有linux驱动,直接运行xsane提示“没表装置可以使用”,用sudo sane-find-scanner后出现下面提示:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04ca [Liteon Group Silitek OCS], product=0x3606 [Uniscan Series Scanner], chip=GL842) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
提示找到USB扫描仪,接着按照提示输入scanimage -L后去没有找到:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

到这里就不知道怎么办了,求高手指点!!!
回复

回到 “归档贴”