救命,我已经和8.10战斗3天了
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
- lqqwd
- 帖子: 53
- 注册时间: 2008-11-01 17:28
救命,我已经和8.10战斗3天了
我是一个新手,三天前按照教程安装好了UBUNTU8.10。并且安装了显卡驱动和汉语。
但是问题出来了,就是分辨率一直很低。我用的是5200显卡128显存,装好驱动(173)前分辨率是800*600但是装好后分辨率就之有640*480。然后试了很多办法都没有用(中间黑屏无数次)。后来我修改了xorg.conf文件。屏幕分辨率还是640*480,但是桌面变成1024*768了,也就是屏幕不能显示整个桌面了。贴出我的xorg.conf文件,望高手指点。
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-80
VertRefresh 50-75
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1024x768@70" "1024x768@60" "1280x1024@60"
EndSubSection
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
还有,我的屏幕是个杂牌,杂到我把参数拿去GOOGLE,竟然没有一个能对上号,下软件来看,也没有软件能说出我屏幕的生产厂商的。一下是我的说明书上的屏幕的参数:
显示屏 17` FTF LCD
LCD面板尺寸 43.27cm
显示面积337.29*270.34mm
点距 0.264*0.264mm
响应时间 8ms
显示色彩 16.7M
最大对比系数 600:1
灯管亮度 350cd/m的平方
可视角度水平176 垂直176
行频30-80
场频50-75
最佳分辨率1280*1024
显示器预设模式如下:
分辨率 行频 刷新率
720*400 31.47 70
640*480 31.47 60
37.50 75
800*600 37.88 60
48.08 72
46.87 75
1024*768 48.36 60
56.48 70
60.02 75
1028*1024 63.98 60
79.9 75
但是问题出来了,就是分辨率一直很低。我用的是5200显卡128显存,装好驱动(173)前分辨率是800*600但是装好后分辨率就之有640*480。然后试了很多办法都没有用(中间黑屏无数次)。后来我修改了xorg.conf文件。屏幕分辨率还是640*480,但是桌面变成1024*768了,也就是屏幕不能显示整个桌面了。贴出我的xorg.conf文件,望高手指点。
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-80
VertRefresh 50-75
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1024x768@70" "1024x768@60" "1280x1024@60"
EndSubSection
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
还有,我的屏幕是个杂牌,杂到我把参数拿去GOOGLE,竟然没有一个能对上号,下软件来看,也没有软件能说出我屏幕的生产厂商的。一下是我的说明书上的屏幕的参数:
显示屏 17` FTF LCD
LCD面板尺寸 43.27cm
显示面积337.29*270.34mm
点距 0.264*0.264mm
响应时间 8ms
显示色彩 16.7M
最大对比系数 600:1
灯管亮度 350cd/m的平方
可视角度水平176 垂直176
行频30-80
场频50-75
最佳分辨率1280*1024
显示器预设模式如下:
分辨率 行频 刷新率
720*400 31.47 70
640*480 31.47 60
37.50 75
800*600 37.88 60
48.08 72
46.87 75
1024*768 48.36 60
56.48 70
60.02 75
1028*1024 63.98 60
79.9 75
- hethe
- 帖子: 3666
- 注册时间: 2005-08-01 9:14
Re: 救命,我已经和8.10战斗3天了
行频30-80
场频50-75
这也太低了吧
场频50-75
这也太低了吧
Gedanken ohne Inhalt sind leer .Anschauungen ohne Begriffe sind blind.
- lqqwd
- 帖子: 53
- 注册时间: 2008-11-01 17:28
Re: 救命,我已经和8.10战斗3天了
杂牌显示器,很垃圾,我也想不通当时为什么要没这个hethe 写了:行频30-80
场频50-75
这也太低了吧
-
- 帖子: 9
- 注册时间: 2008-04-28 14:11
Re: 救命,我已经和8.10战斗3天了
好像可以通过nvidia来修改,可惜我的ubuntu在8.04升8.10时,我的显卡出了问题。需要弄一弄。现在暂时也搞不清楚。我的显卡跟你一样5200的64MB。
- lqqwd
- 帖子: 53
- 注册时间: 2008-11-01 17:28
Re: 救命,我已经和8.10战斗3天了
我们的显卡不一样,我是5200的128MB。是试过用用nVIDIA来修改,修改之后就成我帖子里说的症状了,然后重启就黑屏。。。。。。。。。。逸之兔 写了:好像可以通过nvidia来修改,可惜我的ubuntu在8.04升8.10时,我的显卡出了问题。需要弄一弄。现在暂时也搞不清楚。我的显卡跟你一样5200的64MB。
-
- 帖子: 93
- 注册时间: 2008-05-28 12:43
- 联系:
Re: 救命,我已经和8.10战斗3天了
我建议你还所编译显卡驱动安装把
在论坛里面 搜索 编译 显卡驱动 第一个就所
方法很简单的
编译的速度更快 3D效果更爽
在论坛里面 搜索 编译 显卡驱动 第一个就所
方法很简单的
编译的速度更快 3D效果更爽
- yingtianli
- 帖子: 631
- 注册时间: 2008-09-20 14:27
Re: 救命,我已经和8.10战斗3天了
还是好好用8.04版吧。问题估计出在显示器上,我以前安装过8.10bata版,驱动后和楼上出现的情况一样(我的显示器是15寸crt的,显卡是mx200),怎么也上不到1024*768*60。现在使用的是8.04,可以上到1024*768。希望你们成功。
- lqqwd
- 帖子: 53
- 注册时间: 2008-11-01 17:28
Re: 救命,我已经和8.10战斗3天了
我也觉得问题多半是出在显示器上,但是就没有办法就在8.10解决上解决吗yingtianli 写了:还是好好用8.04版吧。问题估计出在显示器上,我以前安装过8.10bata版,驱动后和楼上出现的情况一样(我的显示器是15寸crt的,显卡是mx200),怎么也上不到1024*768*60。现在使用的是8.04,可以上到1024*768。希望你们成功。
- jeffwei
- 帖子: 1344
- 注册时间: 2007-05-12 22:48
Re: 救命,我已经和8.10战斗3天了
液晶行频60,调到85久了必死无疑。hethe 写了:行频30-80
场频50-75
这也太低了吧
- jeffwei
- 帖子: 1344
- 注册时间: 2007-05-12 22:48
Re: 救命,我已经和8.10战斗3天了
面板没有FTF,是TFT,自己编译内核,论坛有教程,然后下载NV的官方驱动安装,设置分辨率:1280*1024@60Hz
-
- 帖子: 166
- 注册时间: 2007-04-06 1:45
Re: 救命,我已经和8.10战斗3天了
用177的驱动试试
- yangjinchao
- 帖子: 119
- 注册时间: 2006-04-18 21:08
- 联系:
Re: 救命,我已经和8.10战斗3天了
试试用envyng这个程序。专门安装驱动了。
-
- 帖子: 28
- 注册时间: 2008-11-03 7:27
Re: 救命,我已经和8.10战斗3天了
建议换一个十九寸的液晶屏。我的是ACER AL1916W,支持得很好。平心而论,linux发行版中,ubuntu的硬件支持最好,现在三天都没拿下,可见问题的根源。
-
- 帖子: 13
- 注册时间: 2008-11-01 21:04
Re: 救命,我已经和8.10战斗3天了
可怜的小白,装8.04吧。
-
- 帖子: 18
- 注册时间: 2008-11-03 18:37
Re: 救命,我已经和8.10战斗3天了
屏幕不能显示整个桌面?开3d了吗?开了的话可能就是3d那里的分辨率问题