当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 30 篇帖子 ]  前往页数 1, 2  下一页
作者 内容
1 楼 
 文章标题 : 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 0:55 
头像

注册: 2007-05-13 16:45
帖子: 2321
地址: 阿拉斯加群岛其中的一个岛上一片原始森林里其中的一颗树上
送出感谢: 0 次
接收感谢: 0 次
我在XP下把EXT4分区由逻辑分区转为主分区,然后把前面的分区调整到后面,把后面两个分区合并成一个大分区,分区魔术师认为我的EXT4是EXT2,在LINUX下,GPARTED认为是NTFS,挂上去只有几个NTFS的文件,数据无法读取,用mount -t ext4 /dev/sdb1 /mnt/usb/ 提示mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

运行DMESG提示

代码:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30-1-686 (Debian 2.6.30-5) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-15) ) #1 SMP Mon Aug 3 16:18:30 UTC 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006fee0000 (usable)
[    0.000000]  BIOS-e820: 000000006fee0000 - 000000006fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006fee3000 - 000000006fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000006fef0000 - 000000006ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x6fee0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 base 0060000000 mask FFF0000000 write-back
[    0.000000]   3 base 006FF00000 mask FFFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 378ee000 - 37fefb3a
[    0.000000] Allocated new RAMDISK: 00544000 - 00c45b3a
[    0.000000] Move RAMDISK from 00000000378ee000 - 0000000037fefb39 to 00544000 - 00c45b39
[    0.000000] ACPI: RSDP 000f70c0 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 6fee3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 6fee3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 6fee30c0 06550 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 6fee0000 00040
[    0.000000] ACPI: SSDT 6fee9700 0028A (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 6fee99c0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 6fee9a00 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 6fee9640 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 902MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 0000540b10]    TEXT DATA BSS ==> [0000100000 - 0000540b10]
[    0.000000]   #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
[    0.000000]   #5 [0000541000 - 0000543116]              BRK ==> [0000541000 - 0000543116]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [0000544000 - 0000c45b3a]      NEW RAMDISK ==> [0000544000 - 0000c45b3a]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00f5770] f5770
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0006fee0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0006fee0
[    0.000000] On node 0 totalpages: 458367
[    0.000000] free_area_init_node: node 0, pgdat c040bd40, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3967 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1806 pages used for memmap
[    0.000000]   HighMem zone: 229332 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 70000000 (gap: 6ff00000:70100000)
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 11 pages at c1e07000, static data 22172 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 454785
[    0.000000] Kernel command line: root=/dev/sda3 ro
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:1280
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2605.492 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Initializing HighMem for node 0 (000377fe:0006fee0)
[    0.004000] Memory: 1805652k/1833856k available (2173k kernel code, 26912k reserved, 1151k data, 320k init, 924552k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.004000]       .init : 0xc0446000 - 0xc0496000   ( 320 kB)
[    0.004000]       .data : 0xc031f587 - 0xc043f2f0   (1151 kB)
[    0.004000]       .text : 0xc0100000 - 0xc031f587   (2173 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[    0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5210.98 BogoMIPS (lpj=10421968)
[    0.004118] Security Framework initialized
[    0.004159] SELinux:  Disabled at boot.
[    0.004210] Mount-cache hash table entries: 512
[    0.004357] Initializing cgroup subsys ns
[    0.004395] Initializing cgroup subsys cpuacct
[    0.004434] Initializing cgroup subsys devices
[    0.004471] Initializing cgroup subsys freezer
[    0.004509] Initializing cgroup subsys net_cls
[    0.004561] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004599] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004635] CPU: Physical Processor ID: 0
[    0.004670] CPU: Processor Core ID: 0
[    0.004709] Intel machine check architecture supported.
[    0.004747] Intel machine check reporting enabled on CPU#0.
[    0.004784] using C1E aware idle routine
[    0.004831] Checking 'hlt' instruction... OK.
[    0.020797] ACPI: Core revision 20090320
[    0.032185] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071908] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[    0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 5211.02 BogoMIPS (lpj=10422040)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] Intel machine check architecture supported.
[    0.004000] Intel machine check reporting enabled on CPU#1.
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.160421] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[    0.160921] Brought up 2 CPUs
[    0.160958] Total of 2 processors activated (10422.00 BogoMIPS).
[    0.161094] CPU0 attaching sched-domain:
[    0.161096]  domain 0: span 0-1 level MC
[    0.161098]   groups: 0 1
[    0.161102] CPU1 attaching sched-domain:
[    0.161104]  domain 0: span 0-1 level MC
[    0.161106]   groups: 1 0
[    0.161153] net_namespace: 1088 bytes
[    0.161153] Booting paravirtualized kernel on bare hardware
[    0.161153] regulator: core version 0.5
[    0.161153] NET: Registered protocol family 16
[    0.161153] ACPI: bus type pci registered
[    0.161153] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.161153] PCI: MCFG area at e0000000 reserved in E820
[    0.161153] PCI: Using MMCONFIG for extended config space
[    0.161153] PCI: Using configuration type 1 for base access
[    0.161153] bio: create slab <bio-0> at 0
[    0.161153] ACPI: EC: Look up EC in DSDT
[    0.169519] ACPI: Interpreter enabled
[    0.169564] ACPI: (supports S0 S1 S4 S5)
[    0.169741] ACPI: Using IOAPIC for interrupt routing
[    0.173060] ACPI: No dock devices found.
[    0.173060] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.173060] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[    0.173060] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.173060] pci 0000:00:0a.0: PME# disabled
[    0.173060] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
[    0.173060] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
[    0.173060] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
[    0.173060] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
[    0.173060] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
[    0.173060] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
[    0.173060] pci 0000:00:11.0: set SATA to AHCI mode
[    0.173060] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
[    0.173060] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[    0.173060] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[    0.173060] pci 0000:00:12.2: supports D1 D2
[    0.173060] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.173060] pci 0000:00:12.2: PME# disabled
[    0.173060] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[    0.173060] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[    0.173060] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
[    0.173060] pci 0000:00:13.2: supports D1 D2
[    0.173060] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.176005] pci 0000:00:13.2: PME# disabled
[    0.176161] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[    0.176168] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[    0.176174] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[    0.176181] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[    0.176188] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f]
[    0.176257] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
[    0.176301] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.176340] pci 0000:00:14.2: PME# disabled
[    0.176485] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff]
[    0.176617] pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[    0.176621] pci 0000:01:05.0: reg 14 io port: [0xee00-0xeeff]
[    0.176625] pci 0000:01:05.0: reg 18 32bit mmio: [0xfdfe0000-0xfdfeffff]
[    0.176633] pci 0000:01:05.0: reg 24 32bit mmio: [0xfde00000-0xfdefffff]
[    0.176645] pci 0000:01:05.0: supports D1 D2
[    0.176665] pci 0000:01:05.1: reg 10 32bit mmio: [0xfdffc000-0xfdffffff]
[    0.176686] pci 0000:01:05.1: supports D1 D2
[    0.176729] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[    0.176732] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdffffff]
[    0.176736] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.176772] pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff]
[    0.176788] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdaff000-0xfdafffff]
[    0.176799] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdae0000-0xfdaeffff]
[    0.176806] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[    0.176837] pci 0000:02:00.0: supports D1 D2
[    0.176839] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.176878] pci 0000:02:00.0: PME# disabled
[    0.176975] pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff]
[    0.176978] pci 0000:00:0a.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[    0.176982] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
[    0.177036] pci 0000:03:07.0: reg 10 io port: [0xce00-0xceff]
[    0.177051] pci 0000:03:07.0: reg 14 64bit mmio: [0xfdcff000-0xfdcfffff]
[    0.177079] pci 0000:03:07.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.177147] pci 0000:00:14.4: transparent bridge
[    0.177187] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff]
[    0.177192] pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[    0.177197] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff]
[    0.177209] pci_bus 0000:00: on NUMA node 0
[    0.177215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.177431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.177512] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.177560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.192488] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.192539] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.192996] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.193454] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.193913] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.194370] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.194830] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.196041] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.196449] PCI: Using ACPI for IRQ routing
[    0.196449] pci 0000:00:00.0: BAR 3: can't allocate resource
[    0.216020] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[    0.216208] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.220028] hpet: hpet2 irq 24 for MSI
[    0.224024] Switched to high resolution mode on CPU 0
[    0.224884] Switched to high resolution mode on CPU 1
[    0.240018] pnp: PnP ACPI init
[    0.240059] ACPI: bus type pnp registered
[    0.243072] pnp 00:0d: mem resource (0xd6600-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.243113] pnp 00:0d: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.243154] pnp 00:0d: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.243195] pnp 00:0d: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.243236] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.243276] pnp 00:0d: mem resource (0x100000-0x6fedffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.243434] pnp: PnP ACPI: found 14 devices
[    0.243469] ACPI: ACPI bus type pnp unregistered
[    0.243507] PnPBIOS: Disabled by ACPI PNP
[    0.243549] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.243586] system 00:01: ioport range 0x220-0x225 has been reserved
[    0.243623] system 00:01: ioport range 0x290-0x294 has been reserved
[    0.243662] system 00:02: ioport range 0x4100-0x411f has been reserved
[    0.243699] system 00:02: ioport range 0x228-0x22f has been reserved
[    0.243735] system 00:02: ioport range 0x238-0x23f has been reserved
[    0.243772] system 00:02: ioport range 0x40b-0x40b has been reserved
[    0.243809] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[    0.243845] system 00:02: ioport range 0xc00-0xc01 has been reserved
[    0.243882] system 00:02: ioport range 0xc14-0xc14 has been reserved
[    0.243918] system 00:02: ioport range 0xc50-0xc52 has been reserved
[    0.243955] system 00:02: ioport range 0xc6c-0xc6d has been reserved
[    0.243991] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[    0.244044] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[    0.244080] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[    0.244117] system 00:02: ioport range 0xcd4-0xcdf has been reserved
[    0.244153] system 00:02: ioport range 0x4000-0x40fe has been reserved
[    0.244190] system 00:02: ioport range 0x4210-0x4217 has been reserved
[    0.244227] system 00:02: ioport range 0xb00-0xb0f has been reserved
[    0.244265] system 00:02: ioport range 0xb10-0xb1f has been reserved
[    0.244301] system 00:02: ioport range 0xb20-0xb3f has been reserved
[    0.244342] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[    0.244381] system 00:0d: iomem range 0x6fee0000-0x6fefffff could not be reserved
[    0.244422] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[    0.244460] system 00:0d: iomem range 0x6fff0000-0x7ffeffff has been reserved
[    0.244497] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.244544] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.244582] system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
[    0.279606] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.279643] pci 0000:00:01.0:   IO window: 0xe000-0xefff
[    0.279681] pci 0000:00:01.0:   MEM window: 0xfde00000-0xfdffffff
[    0.279718] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.279761] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[    0.279797] pci 0000:00:0a.0:   IO window: 0xd000-0xdfff
[    0.279833] pci 0000:00:0a.0:   MEM window: 0xfdd00000-0xfddfffff
[    0.279870] pci 0000:00:0a.0:   PREFETCH window: 0x000000fda00000-0x000000fdafffff
[    0.279912] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[    0.279949] pci 0000:00:14.4:   IO window: 0xc000-0xcfff
[    0.279988] pci 0000:00:14.4:   MEM window: 0xfdc00000-0xfdcfffff
[    0.280039] pci 0000:00:14.4:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[    0.280097] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.280135] pci 0000:00:0a.0: setting latency timer to 64
[    0.280142] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.280144] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.280147] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
[    0.280149] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdffffff]
[    0.280151] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.280154] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.280156] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[    0.280159] pci_bus 0000:02: resource 2 pref mem [0xfda00000-0xfdafffff]
[    0.280161] pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
[    0.280163] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
[    0.280166] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[    0.280168] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.280170] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[    0.280233] NET: Registered protocol family 2
[    0.328090] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.328486] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.329291] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.329726] TCP: Hash tables configured (established 131072 bind 65536)
[    0.329763] TCP reno registered
[    0.340131] NET: Registered protocol family 1
[    0.340225] Trying to unpack rootfs image as initramfs...
[    0.499181] Freeing initrd memory: 7174k freed
[    0.505328] audit: initializing netlink socket (disabled)
[    0.505381] type=2000 audit(1249691906.504:1): initialized
[    0.505679] highmem bounce pool size: 64 pages
[    0.505718] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.505871] VFS: Disk quotas dquot_6.5.2
[    0.505941] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.506025] msgmni has been set to 1736
[    0.506255] alg: No test for stdrng (krng)
[    0.506358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.506401] io scheduler noop registered
[    0.506438] io scheduler anticipatory registered
[    0.506474] io scheduler deadline registered
[    0.506529] io scheduler cfq registered (default)
[    0.620055] pci 0000:01:05.0: Boot video device
[    0.620244] pcieport-driver 0000:00:0a.0: irq 25 for MSI/MSI-X
[    0.620253] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[    0.620753] isapnp: Scanning for PnP cards...
[    0.974539] isapnp: No Plug & Play device found
[    0.977819] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.978008] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.978549] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.980541] brd: module loaded
[    0.980668] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.981110] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.981149] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.981284] mice: PS/2 mouse device common for all mice
[    0.981389] rtc_cmos 00:05: RTC can wake from S4
[    0.981478] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.981548] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.981620] cpuidle: using governor ladder
[    0.981655] cpuidle: using governor menu
[    0.981693] No iBFT detected.
[    0.982064] TCP cubic registered
[    0.982153] NET: Registered protocol family 10
[    0.982607] lo: Disabled Privacy Extensions
[    0.982918] Mobile IPv6
[    0.982953] NET: Registered protocol family 17
[    0.982994] Using IPI No-Shortcut mode
[    0.983160] registered taskstats version 1
[    0.983359] rtc_cmos 00:05: setting system clock to 2009-08-08 00:38:27 UTC (1249691907)
[    0.983449] Freeing unused kernel memory: 320k freed
[    0.983729] Write protecting the kernel text: 2176k
[    0.983783] Write protecting the kernel read-only data: 784k
[    1.000032] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.128164] SCSI subsystem initialized
[    1.156147] usbcore: registered new interface driver usbfs
[    1.156220] usbcore: registered new interface driver hub
[    1.156276] usbcore: registered new device driver usb
[    1.159778] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.159860] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.159913] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.159988] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.160059] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    1.160116] ehci_hcd 0000:00:12.2: debug port 1
[    1.160175] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[    1.162751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.176589] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.176665] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.176702] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.176741] usb usb1: Product: EHCI Host Controller
[    1.176776] usb usb1: Manufacturer: Linux 2.6.30-1-686 ehci_hcd
[    1.176812] usb usb1: SerialNumber: 0000:00:12.2
[    1.176907] usb usb1: configuration #1 chosen from 1 choice
[    1.176969] hub 1-0:1.0: USB hub found
[    1.177015] hub 1-0:1.0: 6 ports detected
[    1.177169] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.177224] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.177276] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[    1.177347] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[    1.177613] Uniform Multi-Platform E-IDE driver
[    1.180336] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.180391] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.180443] r8169 0000:02:00.0: setting latency timer to 64
[    1.180546] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
[    1.181104] eth0: RTL8168c/8111c at 0xf8212000, 00:1f:d0:90:ac:c1, XID 3c4000c0 IRQ 26
[    1.181127] libata version 3.00 loaded.
[    1.201590] aic7xxx 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.415609] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.415647] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.415686] usb usb2: Product: OHCI Host Controller
[    1.415722] usb usb2: Manufacturer: Linux 2.6.30-1-686 ohci_hcd
[    1.415757] usb usb2: SerialNumber: 0000:00:12.0
[    1.415847] usb usb2: configuration #1 chosen from 1 choice
[    1.415906] hub 2-0:1.0: USB hub found
[    1.415949] hub 2-0:1.0: 3 ports detected
[    1.416094] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.416140] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.416194] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[    1.416253] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    1.416309] ehci_hcd 0000:00:13.2: debug port 1
[    1.416364] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[    1.428612] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.428678] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.428715] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.428754] usb usb3: Product: EHCI Host Controller
[    1.428789] usb usb3: Manufacturer: Linux 2.6.30-1-686 ehci_hcd
[    1.428825] usb usb3: SerialNumber: 0000:00:13.2
[    1.428921] usb usb3: configuration #1 chosen from 1 choice
[    1.428980] hub 3-0:1.0: USB hub found
[    1.429022] hub 3-0:1.0: 6 ports detected
[    1.429172] ahci 0000:00:11.0: version 3.0
[    1.429199] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.429309] ahci 0000:00:11.0: irq 27 for MSI/MSI-X
[    1.429425] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.429466] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.429971] scsi1 : ahci
[    1.430125] scsi2 : ahci
[    1.430204] scsi3 : ahci
[    1.430281] scsi4 : ahci
[    1.430403] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 27
[    1.430445] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 27
[    1.430485] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 27
[    1.430527] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 27
[    1.430620] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
[    1.430664] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.430721] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[    1.430762]     ide0: BM-DMA at 0xfa00-0xfa07
[    1.430805]     ide1: BM-DMA at 0xfa08-0xfa0f
[    1.430847] Probing IDE interface ide0...
[    1.777973] ata1: SATA link down (SStatus 0 SControl 300)
[    1.780035] ata4: SATA link down (SStatus 0 SControl 300)
[    1.780096] ata2: SATA link down (SStatus 0 SControl 300)
[    1.780155] ata3: SATA link down (SStatus 0 SControl 300)
[    1.888035] usb 2-1: new full speed USB device using ohci_hcd and address 2
[    1.996051] Probing IDE interface ide1...
[    2.064665] usb 2-1: New USB device found, idVendor=1131, idProduct=1004
[    2.064706] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.064743] usb 2-1: Product: ISSCEDRBTA
[    2.064777] usb 2-1: Manufacturer: ISSC
[    2.064866] usb 2-1: configuration #1 chosen from 1 choice
[    2.564053] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    2.564169] ide1 at 0x170-0x177,0x376 on irq 15
[    2.565877] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.565932] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    2.565992] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    2.566049] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[    2.624519] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.624556] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.624595] usb usb4: Product: OHCI Host Controller
[    2.624630] usb usb4: Manufacturer: Linux 2.6.30-1-686 ohci_hcd
[    2.624666] usb usb4: SerialNumber: 0000:00:12.1
[    2.624750] usb usb4: configuration #1 chosen from 1 choice
[    2.624809] hub 4-0:1.0: USB hub found
[    2.624854] hub 4-0:1.0: 3 ports detected
[    2.625511] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.625560] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.625613] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    2.625684] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[    2.684010] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.684049] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.684088] usb usb5: Product: OHCI Host Controller
[    2.684124] usb usb5: Manufacturer: Linux 2.6.30-1-686 ohci_hcd
[    2.684159] usb usb5: SerialNumber: 0000:00:13.0
[    2.684238] usb usb5: configuration #1 chosen from 1 choice
[    2.684295] hub 5-0:1.0: USB hub found
[    2.684338] hub 5-0:1.0: 3 ports detected
[    2.684705] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.684755] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    2.684810] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    2.684862] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[    2.744520] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.744561] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.744600] usb usb6: Product: OHCI Host Controller
[    2.744635] usb usb6: Manufacturer: Linux 2.6.30-1-686 ohci_hcd
[    2.744671] usb usb6: SerialNumber: 0000:00:13.1
[    2.744773] usb usb6: configuration #1 chosen from 1 choice
[    2.744834] hub 6-0:1.0: USB hub found
[    2.744877] hub 6-0:1.0: 3 ports detected
[    2.745018] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.745077] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    2.745131] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    2.745186] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[    2.804014] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.804052] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.804092] usb usb7: Product: OHCI Host Controller
[    2.804127] usb usb7: Manufacturer: Linux 2.6.30-1-686 ohci_hcd
[    2.804163] usb usb7: SerialNumber: 0000:00:14.5
[    2.804237] usb usb7: configuration #1 chosen from 1 choice
[    2.804298] hub 7-0:1.0: USB hub found
[    2.804340] hub 7-0:1.0: 2 ports detected
[   16.412040] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[   16.412042]         <Adaptec 29160 Ultra160 SCSI adapter>
[   16.412043]         aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[   16.412044]
[   16.412841] scsi 0:0:0:0: Direct-Access     QUANTUM  ATLAS10K3_18_SCA 120G PQ: 0 ANSI: 3
[   16.412891] scsi0:A:0:0: Tagged Queuing enabled.  Depth 8
[   16.412966] scsi target0:0:0: Beginning Domain Validation
[   16.414957] scsi target0:0:0: wide asynchronous
[   16.416566] scsi target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[   16.420785] scsi target0:0:0: Ending Domain Validation
[   20.015709] Driver 'sd' needs updating - please use bus_type methods
[   20.016084] sd 0:0:0:0: [sda] 35566478 512-byte hardware sectors: (18.2 GB/16.9 GiB)
[   20.017585] sd 0:0:0:0: [sda] Write Protect is off
[   20.017624] sd 0:0:0:0: [sda] Mode Sense: e5 00 10 08
[   20.018768] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   20.021610]  sda: sda1 sda2 sda3 sda4
[   20.031362] sd 0:0:0:0: [sda] Attached SCSI disk
[   20.386577] kjournald starting.  Commit interval 5 seconds
[   20.386624] EXT3-fs: mounted filesystem with ordered data mode.
[   21.496310] udev: starting version 141
[   21.754163] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   21.754212] ACPI: Power Button [PWRF]
[   21.754307] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   21.754347] ACPI: Power Button [PWRB]
[   21.829840] processor ACPI_CPU:00: registered as cooling_device0
[   21.829919] processor ACPI_CPU:01: registered as cooling_device1
[   21.862090] ACPI: WMI: Mapper loaded
[   21.867490] parport_pc 00:09: reported by Plug and Play ACPI
[   21.867588] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   21.969871] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   21.972177] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   21.979334] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   22.014940] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[   22.014985] shpchp 0000:00:01.0: Cannot reserve MMIO region
[   22.015041] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.103757] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   22.494540] Bluetooth: Core ver 2.15
[   22.495771] NET: Registered protocol family 31
[   22.495812] Bluetooth: HCI device and connection manager initialized
[   22.495851] Bluetooth: HCI socket layer initialized
[   22.641796] Bluetooth: Generic Bluetooth USB driver ver 0.5
[   22.641906] usbcore: registered new interface driver btusb
[   22.824219] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   22.993348] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   23.075451] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   23.075693] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[   23.079650] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   23.079714] HDA Intel 0000:01:05.1: setting latency timer to 64
[   25.610690] Adding 1935824k swap on /dev/sda4.  Priority:-1 extents:1 across:1935824k
[   25.713779] EXT3 FS on sda3, internal journal
[   25.807811] loop: module loaded
[   27.305962] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (2 cpu cores) (version 2.20.00)
[   27.306015] powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0xa
[   27.306018] powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0xc
[   27.306021] powernow-k8:    2 : fid 0xe (2200 MHz), vid 0xe
[   27.306023] powernow-k8:    3 : fid 0xc (2000 MHz), vid 0x10
[   27.306025] powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
[   27.306027] powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
[   27.365849] r8169: eth0: link up
[   27.365891] r8169: eth0: link up
[   27.504026] Clocksource tsc unstable (delta = -76099152 ns)
[   32.589133] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   32.589140] vboxdrv: Successfully done.
[   32.589145] vboxdrv: Found 2 processor cores.
[   32.589261] vboxdrv: fAsync=1 offMin=0x2c438 offMax=0x2c438
[   32.589402] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[   32.589452] vboxdrv: Successfully loaded version 2.1.2 (interface 0x000a0009).
[   33.133196] Bluetooth: L2CAP ver 2.13
[   33.133246] Bluetooth: L2CAP socket layer initialized
[   33.162626] Bluetooth: RFCOMM socket layer initialized
[   33.162695] Bluetooth: RFCOMM TTY layer initialized
[   33.162738] Bluetooth: RFCOMM ver 1.11
[   33.388047] Bluetooth: SCO (Voice Link) ver 0.6
[   33.388098] Bluetooth: SCO socket layer initialized
[   33.413818] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.413872] Bluetooth: BNEP filters: protocol multicast
[   33.450553] Bridge firewalling registered
[   37.868517] eth0: no IPv6 routers present
[   44.197629] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   44.253535] Linux agpgart interface v0.103
[   44.298700] [drm] Initialized drm 1.1.0 20060810
[   44.313566] pci 0000:01:05.0: setting latency timer to 64
[   44.313797] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:05.0 on minor 0
[   44.961026] [drm] Setting GART location based on new memory map
[   44.961250] [drm] Loading RS780 CP Microcode
[   44.961253] platform r600_cp.0: firmware: requesting radeon/RS780_cp.bin
[   44.995803] r600_cp: Failed to load firmware "radeon/RS780_cp.bin"
[   44.995807] [drm:r600_do_init_cp] *ERROR* Failed to load firmware!
[   92.524036] usb 1-2: new high speed USB device using ehci_hcd and address 3
[   92.664291] usb 1-2: New USB device found, idVendor=1058, idProduct=0903
[   92.664300] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   92.664307] usb 1-2: Product: External HDD
[   92.664311] usb 1-2: Manufacturer: Western Digital
[   92.664316] usb 1-2: SerialNumber: 57442D574D41535936313738383436
[   92.664500] usb 1-2: configuration #1 chosen from 1 choice
[   92.769255] Initializing USB Mass Storage driver...
[   92.778994] usbcore: registered new interface driver hiddev
[   92.779560] scsi5 : SCSI emulation for USB Mass Storage devices
[   92.781879] usbcore: registered new interface driver usb-storage
[   92.781889] USB Mass Storage support registered.
[   92.782167] usb-storage: device found at 3
[   92.782171] usb-storage: waiting for device to settle before scanning
[   92.793224] input: Western Digital External HDD as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.1/input/input6
[   92.793401] generic-usb 0003:1058:0903.0001: input,hidraw0: USB HID v1.11 Device [Western Digital External HDD] on usb-0000:00:12.2-2/input1
[   92.793445] usbcore: registered new interface driver usbhid
[   92.793452] usbhid: v2.6:USB HID core driver
[   97.780790] usb-storage: device scan complete
[   97.782080] scsi 5:0:0:0: Direct-Access     WD       6400AAKS Externa 108a PQ: 0 ANSI: 4
[   97.788432] sd 5:0:0:0: [sdb] 1250261615 512-byte hardware sectors: (640 GB/596 GiB)
[   97.789296] sd 5:0:0:0: [sdb] Write Protect is off
[   97.789304] sd 5:0:0:0: [sdb] Mode Sense: 11 00 00 00
[   97.789310] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[   97.798343] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[   97.798356]  sdb: sdb1 sdb3
[   97.806990] sd 5:0:0:0: [sdb] Attached SCSI disk
[  138.097932] NTFS driver 2.1.29 [Flags: R/W MODULE].
[  138.144682] NTFS volume version 3.1.
[  369.362984] VFS: Can't find ext4 filesystem on dev sdb1.
[  537.825340] VFS: Can't find ext3 filesystem on dev sdb1.
[  552.558637] fuse init (API version 7.11)
[  858.630726] nautilus[3137]: segfault at b54553e0 ip b54553e0 sp bffd2b4c error 4 in SYSV00000000 (deleted)[b5459000+60000]
[ 1202.415951] VFS: Can't find ext3 filesystem on dev sdb1.



怎么办啊?


附件:
2009-08-08-005740_765x607_scrot.png
2009-08-08-005740_765x607_scrot.png [ 106.4 KiB | 被浏览 614 次 ]



_________________
http://shop33976086.taobao.com/
AMD 速龙 x4 630
GIGABYTE MA785GT-UD3H
金士顿 骇客神条 DDR3 1666 2G (这个内存我最肉疼,390元。)
VIEWSONIC 2433
ssh -qTfnN -D 7070
页首
 用户资料  
 
2 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 0:58 
头像

注册: 2007-02-02 18:14
帖子: 30702
系统: debian sid
送出感谢: 1
接收感谢: 34
找你的亲家一眼,下次在贴这么长的log要打你的小pp :em09


_________________
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)


页首
 用户资料  
 
3 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 1:00 
头像

注册: 2007-05-13 16:45
帖子: 2321
地址: 阿拉斯加群岛其中的一个岛上一片原始森林里其中的一颗树上
送出感谢: 0 次
接收感谢: 0 次
我用了CODE啊,输出就这么长,没办法啊。


LINUX说这个分区是NTFS,XP又扯着脖子喊它是EXT2,TMD两头都不认它了。


_________________
http://shop33976086.taobao.com/
AMD 速龙 x4 630
GIGABYTE MA785GT-UD3H
金士顿 骇客神条 DDR3 1666 2G (这个内存我最肉疼,390元。)
VIEWSONIC 2433
ssh -qTfnN -D 7070


页首
 用户资料  
 
4 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 1:02 
头像

注册: 2007-05-13 16:45
帖子: 2321
地址: 阿拉斯加群岛其中的一个岛上一片原始森林里其中的一颗树上
送出感谢: 0 次
接收感谢: 0 次
LINUX下如何刷新MBR?我刷了试试看。


_________________
http://shop33976086.taobao.com/
AMD 速龙 x4 630
GIGABYTE MA785GT-UD3H
金士顿 骇客神条 DDR3 1666 2G (这个内存我最肉疼,390元。)
VIEWSONIC 2433
ssh -qTfnN -D 7070


页首
 用户资料  
 
5 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 1:03 
头像

注册: 2008-10-27 22:28
帖子: 1151
地址: 暮色酒馆
送出感谢: 0 次
接收感谢: 0 次
用diskgenius碰碰运气,我笔记本隐藏分区删了后用它从删掉的分区里考出的原厂镜像


_________________
优猫饼


页首
 用户资料  
 
6 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 1:05 
头像

注册: 2007-05-13 16:45
帖子: 2321
地址: 阿拉斯加群岛其中的一个岛上一片原始森林里其中的一颗树上
送出感谢: 0 次
接收感谢: 0 次
wangks18 写道:
用diskgenius碰碰运气,我笔记本隐藏分区删了后用它从删掉的分区里考出的原厂镜像


MS的软件?不能只碰碰运气啊,我的数据很重要,N多色片,N多照片,不容易啊。


_________________
http://shop33976086.taobao.com/
AMD 速龙 x4 630
GIGABYTE MA785GT-UD3H
金士顿 骇客神条 DDR3 1666 2G (这个内存我最肉疼,390元。)
VIEWSONIC 2433
ssh -qTfnN -D 7070


页首
 用户资料  
 
7 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 1:05 
头像

注册: 2007-02-02 18:14
帖子: 30702
系统: debian sid
送出感谢: 1
接收感谢: 34
两个硬盘做调整分区大小的事你都不用另外的硬盘备份,你认命吧


_________________
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)


页首
 用户资料  
 
8 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 1:07 
头像

注册: 2008-10-27 22:28
帖子: 1151
地址: 暮色酒馆
送出感谢: 0 次
接收感谢: 0 次
bjsm 写道:
wangks18 写道:
用diskgenius碰碰运气,我笔记本隐藏分区删了后用它从删掉的分区里考出的原厂镜像


MS的软件?不能只碰碰运气啊,我的数据很重要,N多色片,N多照片,不容易啊。

这个能刷mbr啊


_________________
优猫饼


页首
 用户资料  
 
9 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 1:09 
头像

注册: 2007-02-02 18:14
帖子: 30702
系统: debian sid
送出感谢: 1
接收感谢: 34
可以,分区错误刷mbr有鬼用啊


_________________
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)


页首
 用户资料  
 
10 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 1:09 
头像

注册: 2007-05-13 16:45
帖子: 2321
地址: 阿拉斯加群岛其中的一个岛上一片原始森林里其中的一颗树上
送出感谢: 0 次
接收感谢: 0 次
leeaman 写道:
两个硬盘做调整分区大小的事你都不用另外的硬盘备份,你认命吧

就一个盘哎,我一直自认人品好。EE这个家伙这么早就睡了?才1点多,真是的,谁帮我打电话叫他。


_________________
http://shop33976086.taobao.com/
AMD 速龙 x4 630
GIGABYTE MA785GT-UD3H
金士顿 骇客神条 DDR3 1666 2G (这个内存我最肉疼,390元。)
VIEWSONIC 2433
ssh -qTfnN -D 7070


页首
 用户资料  
 
11 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 1:32 
头像

注册: 2007-11-14 17:39
帖子: 441
送出感谢: 0 次
接收感谢: 0 次
节哀顺变~~是时候买个移动硬盘


页首
 用户资料  
 
12 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 8:44 

注册: 2008-01-09 22:41
帖子: 18311
送出感谢: 0 次
接收感谢: 6
瞎折腾

节哀吧


页首
 用户资料  
 
13 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 9:03 
头像

注册: 2008-10-14 12:46
帖子: 397
送出感谢: 0 次
接收感谢: 0 次
testdisk试试


_________________
微软做的是商品—能卖出就行
苹果做的是艺术品—卖的就是艺术
Linux是手工制品—自己用着爽就行


页首
 用户资料  
 
14 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 9:29 
头像

注册: 2008-11-21 20:26
帖子: 36913
送出感谢: 1
接收感谢: 36
晚上不好好睡觉,弄这些劳什子干啥?


_________________
讨厌我的人可以试着点一下
浏览全部ubuntu技巧


页首
 用户资料  
 
15 楼 
 文章标题 : Re: 谁能拯救我?分区格式错误,无法读取内容了。600G啊。
帖子发表于 : 2009-08-08 9:44 
头像

注册: 2008-02-17 23:47
帖子: 22109
地址: 美丽富饶的那啥星球
送出感谢: 11
接收感谢: 82
惨。
我说你分区表错误,刷mbr干啥?无辜啊!人家是Master Boot Recorde,OK?
再说好毛片就该刻盘放着,就算要调整分区,几百G数据放上面,还不慢死?


_________________
明天就换大三八!
——8核CPU、8G内存、8T硬盘……
8卡交火,80寸大屏放8个……
IPv8的光纤要8条……

---------------------------------------------------------------------------------
[图片版]新手当自强(续)FAQ
[新手进阶]挂载、fstab、调整linux分区
[图片版]E17桌面环境配置手把手


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 30 篇帖子 ]  前往页数 1, 2  下一页

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译