我用的ubuntu8。04,
换了Acer的22寸Acer V223HQ, 不能达到最佳分辨率,最大只能是1600*1200,
我要的是1920*1080,没有这个选项
网上搜所,改了xorg文件,没任何反应,还是没有1920*1080这个选项! 谁能解决,谢了:)
xorg.conf文件如下:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Acer V223HQ"
Option "DPMS"
Horizsync 32-84
Vertrefresh 56-76
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Acer V223HQ"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
新买的显示器不能达到最佳分辨率,怎么办?
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
- Bayes
- 帖子: 94
- 注册时间: 2008-08-28 16:58
-
- 论坛版主
- 帖子: 21308
- 注册时间: 2007-08-02 20:29
- 系统: 窓辺とうこ
-
- 帖子: 555
- 注册时间: 2009-07-13 21:54
- eexpress
- 帖子: 58428
- 注册时间: 2005-08-14 21:55
- 来自: 长沙
Re: 新买的显示器不能达到最佳分辨率,怎么办?
Depth 24
Modes "1920x1080"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200"
你的分辨率和色深,本来就分开的啊。改 Modes "1600x1200" "1920x1080" 这样的试试。
多搜索
Modes "1920x1080"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200"
你的分辨率和色深,本来就分开的啊。改 Modes "1600x1200" "1920x1080" 这样的试试。
多搜索
● 鸣学
- Bayes
- 帖子: 94
- 注册时间: 2008-08-28 16:58
Re: 新买的显示器不能达到最佳分辨率,怎么办?
改成 Modes "1920x1080""1600x1200" 也不行啊,依然没有任何改变eexpress 写了:Depth 24
Modes "1920x1080"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200"
你的分辨率和色深,本来就分开的啊。改 Modes "1600x1200" "1920x1080" 这样的试试。
多搜索
- daf3707
- 论坛版主
- 帖子: 12731
- 注册时间: 2007-06-13 15:57
- 来自: 在他乡
Re: 新买的显示器不能达到最佳分辨率,怎么办?
去掉一段呢,只留24的Depth 24
Modes "1920x1080"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200"