当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 2 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 新手求救~!!!!!!!
帖子发表于 : 2009-10-23 20:40 

注册: 2009-10-23 20:28
帖子: 1
送出感谢: 0 次
接收感谢: 0 次
:em05 简单描述 如下

我在家里上网用的拨号上网不能自动获取IP 那种,我在vm 虚拟机中安装了好ubuntu9.04,在公司开vm 能自动获取Ip 虚拟机就能上网,回到家里开vm 不能获取ip ,我手动写入了Ip,还是不行,修改 /etc/network/interfaces 配置还是不行。dns 也修改了都不行。 实在没法了,以前用了centos 用临时设置IP 或写死IP 都行,现在这ubuntu 怎么搞都不行。请高手指教。 感激不尽啊~~~~!!!!期待答案


页首
 用户资料  
 
2 楼 
 文章标题 : Re: 新手求救~!!!!!!!
帖子发表于 : 2009-10-23 20:42 
头像

注册: 2009-03-19 9:19
帖子: 1423
地址: 江苏
送出感谢: 0 次
接收感谢: 2
看这个说明配置试试
主要看前两个就OK了


代码:
###############################################################################
######################################################################
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
#
# A "#" character in the very first column makes the rest of the line
# be ignored. Blank lines are ignored. Lines may be indented freely.
# A "\" character at the very end of the line indicates the next line
# should be treated as a continuation of the current one.
#
# The "pre-up", "up", "down" and "post-down" options are valid for all
# interfaces, and may be specified multiple times. All other options
# may only be specified once.
#
# See the interfaces(5) manpage for information on what options are
# available.
######################################################################

# We always want the loopback interface.
#
# auto lo
# iface lo inet loopback

# An example ethernet card setup: (broadcast and gateway are optional)
#
# auto eth0
# iface eth0 inet static
# address 192.168.0.42
# network 192.168.0.0
# netmask 255.255.255.0
# broadcast 192.168.0.255
# gateway 192.168.0.1

# A more complicated ethernet setup, with a less common netmask, and a downright# weird broadcast address: (the "up" lines are executed verbatim when the
# interface is brought up, the "down" lines when it's brought down)
#
# auto eth0
# iface eth0 inet static
# address 192.168.1.42
# network 192.168.1.0
# netmask 255.255.255.128
# broadcast 192.168.1.0
# up route add -net 192.168.1.128 netmask 255.255.255.128 gw 192.168.1.2
# up route add default gw 192.168.1.200
# down route del default gw 192.168.1.200
# down route del -net 192.168.1.128 netmask 255.255.255.128 gw 192.168.1.2

# A more complicated ethernet setup with a single ethernet card with
# two interfaces.
# Note: This happens to work since ifconfig handles it that way, not because
# ifup/down handles the ':' any differently.
# Warning: There is a known bug if you do this, since the state will not
# be properly defined if you try to 'ifdown eth0' when both interfaces
# are up. The ifconfig program will not remove eth0 but it will be
# removed from the interfaces state so you will see it up until you execute:
# 'ifdown eth0:1 ; ifup eth0; ifdown eth0'
# BTW, this is "bug" #193679 (it's not really a bug, it's more of a
# limitation)
#
# auto eth0 eth0:1
# iface eth0 inet static
# address 192.168.0.100
# network 192.168.0.0
# netmask 255.255.255.0
# broadcast 192.168.0.255
# gateway 192.168.0.1
# iface eth0:1 inet static
# address 192.168.0.200
# network 192.168.0.0
# netmask 255.255.255.0

# "pre-up" and "post-down" commands are also available. In addition, the
# exit status of these commands are checked, and if any fail, configuration
# (or deconfiguration) is aborted. So:
#
# auto eth0
# iface eth0 inet dhcp
# pre-up [ -f /etc/network/local-network-ok ]
#
# will allow you to only have eth0 brought up when the file
# /etc/network/local-network-ok exists.

# Two ethernet interfaces, one connected to a trusted LAN, the other to
# the untrusted Internet. If their MAC addresses get swapped (because an
# updated kernel uses a different order when probing for network cards,
# say), then they don't get brought up at all.
#
# auto eth0 eth1
# iface eth0 inet static
# address 192.168.42.1
# netmask 255.255.255.0
# pre-up /path/to/check-mac-address.sh eth0 11:22:33:44:55:66
# pre-up /usr/local/sbin/enable-masq
# iface eth1 inet dhcp
# pre-up /path/to/check-mac-address.sh eth1 AA:BB:CC:DD:EE:FF
# pre-up /usr/local/sbin/firewall

# Two ethernet interfaces, one connected to a trusted LAN, the other to
# the untrusted Internet, identified by MAC address rather than interface
# name:
#
# auto eth0 eth1
# mapping eth0 eth1
# script /path/to/get-mac-address.sh
# map 11:22:33:44:55:66 lan
# map AA:BB:CC:DD:EE:FF internet
# iface lan inet static
# address 192.168.42.1
# netmask 255.255.255.0
# pre-up /usr/local/sbin/enable-masq $IFACE
# iface internet inet dhcp
# pre-up /usr/local/sbin/firewall $IFACE

# A PCMCIA interface for a laptop that is used in different locations:
# (note the lack of an "auto" line for any of these)
#
# mapping eth0
# script /path/to/pcmcia-compat.sh
# map home,*,*,* home
# map work,*,*,00:11:22:33:44:55 work-wireless
# map work,*,*,01:12:23:34:45:50 work-static
#
# iface home inet dhcp
# iface work-wireless bootp
# iface work-static static
# address 10.15.43.23
# netmask 255.255.255.0
# gateway 10.15.43.1
#
# Note, this won't work unless you specifically change the file
# /etc/pcmcia/network to look more like:
#
# if [ -r ./shared ] ; then . ./shared ; else . /etc/pcmcia/shared ; fi
# get_info $DEVICE
# case "$ACTION" in
# 'start')
# /sbin/ifup $DEVICE
# ;;
# 'stop')
# /sbin/ifdown $DEVICE
# ;;
# esac
# exit 0

# An alternate way of doing the same thing: (in this case identifying
# where the laptop is is done by configuring the interface as various
# options, and seeing if a computer that is known to be on each particular
# network will respond to pings. The various numbers here need to be chosen
# with a great deal of care.)
#
# mapping eth0
# script /path/to/ping-places.sh
# map 192.168.42.254/24 192.168.42.1 home
# map 10.15.43.254/24 10.15.43.1 work-wireless
# map 10.15.43.23/24 10.15.43.1 work-static
#
# iface home inet dhcp
# iface work-wireless bootp
# iface work-static static
# address 10.15.43.23
# netmask 255.255.255.0
# gateway 10.15.43.1
#
# Note that the ping-places script requires the iproute package installed,
# and the same changes to /etc/pcmcia/network are required for this as for
# the previous example.


# Set up an interface to read all the traffic on the network. This
# configuration can be useful to setup Network Intrusion Detection
# sensors in 'stealth'-type configuration. This prevents the NIDS
# system to be a direct target in a hostile network since they have
# no IP address on the network. Notice, however, that there have been
# known bugs over time in sensors part of NIDS (for example see
# DSA-297 related to Snort) and remote buffer overflows might even be
# triggered by network packet processing.
#
# auto eth0
# iface eth0 inet manual
# up ifconfig $IFACE 0.0.0.0 up
# up ip link set $IFACE promisc on
# down ip link set $IFACE promisc off
# down ifconfig $IFACE down

# Set up an interface which will not be allocated an IP address by
# ifupdown but will be configured through external programs. This
# can be useful to setup interfaces configured through other programs,
# like, for example, PPPOE scripts.
#
# auto eth0
# iface eth0 inet manual
# up ifconfig $IFACE 0.0.0.0 up
# up /usr/local/bin/myconfigscript
# down ifconfig $IFACE down


_________________


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 2 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译