我的xorg.conf哪儿不对啊，为什么开机总是800*600呢？

[icokey]

代码： 全选

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@palmer)  Fri Apr  9 10:35:18 UTC 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "AUO"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8400M G"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x800_60 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

以上是我xorg.conf 的内容。默认开机分辨率是这里改吗，设置好1280x800保存了，开机还一样，，，

[redlhl]

显卡驱动问题？安装受限驱动试试
而且貌似现在不流行改xorg.conf了，都自动的

[leeaman]

没看出来那里不对...升级驱动看看?

[icokey]

好吧，我再试试。。。

[eexpress]

安装 nvidia-settings 设置好，保存一下。

[leeaman]

你的什么版本,nvidia的驱动可能要禁用一下模块的,你先看看可以开3d不

[icokey]

.run格式的官方驱动怎么卸载阿？

[icokey]

安装 nvidia-settings 设置好，保存一下。

保存了，没用，重启后还是800*600

[icokey]

你的什么版本,nvidia的驱动可能要禁用一下模块的,你先看看可以开3d不

可以开3D，compiz特效一直开着的

[icokey]

本来没问题的，闲着没事就装了官方更新的驱动，然后问题就出来了，先是开机提示xorg.conf不对，开机分辨率比800*600还低，而且特效也开不了，只有重装受限驱动，，重启后分辨率为800*600，可以改为1280*800，保存了重启又一样，总不能为这就重装吧，求助下先，

[0o永远的菜鸟o0]

你可以试下开源驱动，在菜单的硬件驱动里有。

[ltkun]

现在xorg.conf不用改了
驱动对就ok
看我的xorg.conf

代码： 全选

Section "Device"
	Identifier	"Configured Video Device"
	Driver		"ati"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection

[黄美姬]

我的A卡直接删除目录就行，当然也有删除的命令

[icokey]

我试过删除目录，开机就开不出来了，后来用光盘恢复的

[tenzu]

有没有试过删掉xorg.conf？