Ubuntu 7.10 Beta 双屏显示问题

重复贴和参考价值不大的帖子,版主维护
回复
CLIFF
帖子: 1
注册时间: 2006-02-21 21:14
送出感谢: 0
接收感谢: 0

Ubuntu 7.10 Beta 双屏显示问题

#1

帖子 CLIFF » 2007-09-30 15:52

显卡为:
cliff@cliffwoo:/etc$ lspci |grep ATI
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550]
01:00.1 Display controller: ATI Technologies Inc RV350 AS [Radeon 9550] (Secondary)



这个配置在Ubuntu 7.04下可以正常工作,但是升级到7.10后,一个屏幕只能mirror另外一个屏幕内容,而不是扩展显示。
只要打开 Xinerama的支持就出错。
不知道有没有用双屏显示的兄弟遇到这个问题。
xorg.conf的配置如下:
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
Driver "ati"
Screen 0
BusID "PCI:1:0:0"
EndSection

Section "Device"
Identifier "Card1"
Driver "ati"
Screen 1
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "L1730S"
Option "DPMS"
EndSection

Section "Monitor" #对外置的显示器新加的,原来的不变
Identifier "MonExt"
Option "DPMS"
EndSection

Section "Screen" #对外置的显示器新加的,原来的不变
Identifier "Screen1"
Device "Card1"
Monitor "L1730S"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
Monitor "MonExt"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
#Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
Screen "Screen1" LeftOf "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection



hookilah
帖子: 117
注册时间: 2006-02-26 19:04
送出感谢: 0
接收感谢: 0

#2

帖子 hookilah » 2007-10-06 22:26

这个是我自己改的xorg.conf配置文件,不知道对你是否有帮助

代码: 全选


Section "Files"
   Fontpath   "/usr/share/fonts/X11/misc"
   Fontpath   "/usr/share/fonts/X11/cyrillic"
   Fontpath   "/usr/share/fonts/X11/100dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/75dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/Type1"
   Fontpath   "/usr/share/fonts/X11/100dpi"
   Fontpath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   Fontpath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath   "/usr/share/fonts/wenquanyi/wqy-zenhei/"
   FontPath   "/usr/share/fonts/wenquanyi/wqy-bitmapfont/"
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
#   Screen     0  "Screen0" 0 0            #[单屏]注释掉这段
   Screen     1  "Screen0" 0 0            #[单屏]启用这段
#       Screen     1  "Screen1" LeftOf "Screen0"      #[单屏]注释掉这段
   Inputdevice   "Generic Keyboard"
   Inputdevice   "Configured Mouse"
#       Option "Xinerama" "on"               #[单屏]注释掉这段
#       Option "Clone" "off"               #[单屏]注释掉这段
EndSection

Section "Module"
   Load      "i2c"
   Load      "bitmap"
   Load      "ddc"
   Load      "extmod"
   Load      "freetype"
   Load      "glx"
   Load      "int10"
   Load      "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "us"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"   "/dev/input/mice"
   Option      "Protocol"   "ImPS/2"
   Option      "ZAxisMapping"   "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "Monitor"
       Identifier     "Monitor0"
       VendorName     "Unknown"
       ModelName      "Philips 170S"
       HorizSync       30.0 - 83.0
       VertRefresh     56.0 - 76.0
       Option         "DPMS"
EndSection

Section "Monitor"
       Identifier     "Monitor1"
       VendorName     "Unknown"
       ModelName      "Chimei CMV946D"
       HorizSync       30.0 - 82.0
       VertRefresh     56.0 - 76.0
       Option         "DPMS"
EndSection

Section "Device"
   Identifier   "Port0"
   Driver   "nvidia"
   BoardName   "GeForce 6600"
   Busid      "PCI:5:0:0"
#   Option   "AddARGBVisuals"   "True"            #[单屏]注释掉这段
#   Option   "AddARGBGLXVisuals"   "True"         #[单屏]注释掉这段
   Option   "NoLogo"   "True"
#   Option    "ConnectedMonitor" "Monitor0"            #[单屏]注释掉这段
       Screen   0
EndSection

Section "Device"
   Identifier   "Port1"
   Driver   "nvidia"
   BoardName   "GeForce 6600"
   Busid      "PCI:5:0:0"
#   Option   "AddARGBVisuals"   "True"            #[单屏]注释掉这段
#   Option   "AddARGBGLXVisuals"   "True"         #[单屏]注释掉这段
   Option   "NoLogo"   "True"
#   Option    "ConnectedMonitor" "Monitor0"            #[单屏]注释掉这段
   Screen   1
EndSection

Section "Screen"
   Identifier   "Screen0"
   Device      "Port0"
   Monitor      "Monitor0"
   Defaultdepth   24
   Option         "metamodes" "DFP: 1280x800 +0+0"
   SubSection "Display"
      Depth   1
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   4
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   8
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   15
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   16
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   24
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
EndSection

Section "Screen"
   Identifier   "Screen1"
   Device      "Port1"
   Monitor      "Monitor1"
   Defaultdepth   24
   Option         "metamodes" "DFP: 1024x768 +0+0"
   SubSection "Display"
      Depth   1
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   4
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   8
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   15
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   16
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   24
      Modes      "1280x800" "1024x768"   "800x600"   "640x480"
   EndSubSection
EndSection

Section "DRI"
   Mode   0666
EndSection

头像
water2007
帖子: 524
注册时间: 2007-04-23 13:34
送出感谢: 0
接收感谢: 0
联系:

#3

帖子 water2007 » 2007-10-07 8:49

什么是双屏显示,楼上能截个图么?
头像
kqueenc
帖子: 630
注册时间: 2007-05-27 20:29
送出感谢: 0
接收感谢: 0

#4

帖子 kqueenc » 2007-10-07 10:25

LZ要的就是TWINVIEW效果。可惜我用的是N卡,直接用NVIDIA-SETTINGS就很容易搞定的。
贴个TWINVIEW的图。
附件
Screenshot2.jpg
图有275K,请耐心。
hookilah
帖子: 117
注册时间: 2006-02-26 19:04
送出感谢: 0
接收感谢: 0

#5

帖子 hookilah » 2007-10-07 21:37

water2007 写了:什么是双屏显示,楼上能截个图么?
附件
citylink1.png
zmaster
帖子: 10
注册时间: 2006-03-08 16:01
送出感谢: 0
接收感谢: 0

#6

帖子 zmaster » 2007-10-09 16:06

我感觉是显卡驱动的问题!
我的是intel整合显卡,现在也是只能用mirror。
回复

回到 “归档贴”