当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 8 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : [问题]nvidia显卡驱动安装求助
帖子发表于 : 2007-12-15 21:36 
头像

注册: 2007-11-29 15:11
帖子: 33
送出感谢: 0 次
接收感谢: 0 次
从nVidia网站下载了NVIDIA-Linux-x86-71.86.01-pkg1.run安装文件,执行之后,依次看到了以下几个提示:

No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site (ftp://download.nvidia.com)?
YES NO

我理所当然选择YES,然后看到

No matching procompiled kernel interface was found on the NVIDIA ftp site; this means that the installer will need to compile a kernel interface for your kernel.
OK

没有其他选择,“OK”继续

ERROR: You do not appear to have libc header files installed on your system. Please install your distribution's libc development package.
OK

还是没有其他选择,“OK”继续

ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the linux driver download page at www.nvidia.com
OK

"OK"之后就退出了安装程序

现在,我的问题是,错误信息中提示的libc development package是什么啊?我用Synaptic Package Manager里面没看到有叫"libc development"的package啊。

此外我将nvidia-installer.log作为附件也贴上来了。

谢谢

nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Dec 15 20:50:41 2007

option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
precompiled interfaces : true
no ncurses color : false
query latest version : false
OpenGL header files : true
no questions : false
silent : false
no recursion : false
no backup : false
kernel module only : false
sanity : false
add this kernel : false
no runlevel check : false
no network : false
no ABI note : false
no RPMs : false
no kernel module : false
force SELinux : default
no X server check : false
force tls : (not specified)
X install prefix : (not specified)
X library install path : (not specified)
X module install path : (not specified)
OpenGL install prefix : (not specified)
OpenGL install libdir : (not specified)
utility install prefix : (not specified)
utility install libdir : (not specified)
doc install prefix : (not specified)
kernel name : (not specified)
kernel include path : (not specified)
kernel source path : (not specified)
kernel output path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp
ftp mirror : ftp://download.nvidia.com
RPM file list : (not specified)

Using: nvidia-installer ncurses user interface
-> License accepted.
-> No precompiled kernel interface was found to match your kernel; would you li
ke the installer to attempt to download a kernel interface for your kernel f
rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site;
this means that the installer will need to compile a kernel interface for
your kernel.
ERROR: You do not appear to have libc header files installed on your system.
Please install your distribution's libc development package.
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.


最后由 lacopa_123 编辑于 2007-12-15 21:42,总共编辑了 1 次

页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-12-15 21:39 
头像

注册: 2007-10-19 14:51
帖子: 4953
地址: 深圳
送出感谢: 0 次
接收感谢: 2
安装 基本编译环境:
sudo apt-get install build-essential


_________________
Nothing 有事请发邮件到 yms541 AT gmail.com
alias 爱慕颇雷尔='mplayer'


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-12-15 22:13 
头像

注册: 2007-02-21 17:06
帖子: 221
地址: 广州
送出感谢: 0 次
接收感谢: 0 次
sudo apt-get install linux-headers-`uname -r` build-essential xserver-xorg-dev pkg-config


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-12-15 22:34 
头像

注册: 2007-10-06 18:40
帖子: 4313
送出感谢: 0 次
接收感谢: 5
你是什么显卡???


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2007-12-16 0:12 

注册: 2007-11-26 18:13
帖子: 4
送出感谢: 0 次
接收感谢: 0 次
建议使用受限制的驱动程序的方法安装。 如果受限制的驱动提示The software source for the package nvidia-glx-new is not enabled.建议你把源更新下然后更新系统 完了以后你在使用受限制的驱动程序启动显卡就可以了 我的就是这样的 不建议使用安装包安装。(除非受限制的驱动程序不能正常安装)


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2007-12-16 0:44 
头像

注册: 2005-09-10 16:04
帖子: 3537
地址: DG-GD-China
送出感谢: 0 次
接收感谢: 0 次
建议从源安装,这样安装如果升级一下内核,又要再安装驱动,麻烦
如果不是很古老的驱动或者太新的驱动,源里面自带的驱动可以解决问题的


_________________
http://element.blog.ubuntu.org.cn/
Ubuntu Jaunty Jackalope...
AMD Barton 2600+
MSI K7N2 Delta-L
Kingston DDR400 512M*2+256M*1
nVidia FX5200
Seagate 80G(Jaunty Jackalope)
Seagate 160G(XXxxXX)
SyncMaster 732N


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2007-12-16 13:55 
头像

注册: 2007-11-29 15:11
帖子: 33
送出感谢: 0 次
接收感谢: 0 次
在这里,首先感谢各位的援手相助,十分真诚的感谢!!!

首先,先说明一下,我的机型是比较老的,02年买的p4 1.8,显卡是nVIDIA GeForce2 Ti,安装的是Ubuntu 7.10 i386 desktop (单CD的那种)。安装完成之后,好像使用安装CD上的驱动就还可以(能上1280*1024的分辨率,色彩虽然不知道具体设置值是多少,可看上去也和windows XP下差不多)。

我第一次安装完成之后,就有提示有Restricted Driver Manager(我的系统默认语言是英语)提示有新的驱动可更新(NVIDIA accelerated graphics driver (legacy cards)),我尝试安装过这个,但是安装上之后,显示效果反而大不如以前,桌面分辨率也上不去了,色彩也不如以前了。我当时还不知道怎么卸载,索性重新安装了一边ubuntu。后来就一直使用原先默认的驱动。

后来从google网站下载了一个google earth,安装之后,运行的时候总是提示显卡驱动有问题,于是我就去nVidia的网站上下载了NVIDIA-Linux-x86-71.86.01-pkg1.run,按照各位的提示终于安装上去了。可是到最后一步的时候还是出问题了。

按照nVidia官方网站的提示,安装完那个程序之后还要对xorg.conf进行两处修改,一个是将xorg.conf文件中Device Section (如下)中的Driver由"nv"改成nvidia,另外是将Module Section中
In the Module section, make sure you have:

Load "glx"

You should also remove the following lines:

Load "dri"
Load "GLcore"


我检查了一下我的计算机上的 /etc/X11/xorg.conf文件,发现第一点好办,只需要改"nv"为"nvidia"就好了,第二点,我发现我的xorg.conf中压根就没有Module Section这一段。

我第一次改动是将"nv"改成了"nvidia",然后手工添加了Module Section,在其中只加了一句 Load "glx",然后重启计算机,结果是启动过程中还提醒我选择显卡,我只有选择nVidia Geforce2 DDR generic (这是和我的显卡型号看上去最接近的一个),然后登录桌面之后发现分辨率最高只能上到800*600,色彩也不大行。

我第二次改动是将Module Section整个去掉了,再重启,结果还是一样

无奈之下,我只好将Device Section中的Driver "nvidia"改回Driver "nv",再次重启,这次没问题了,但是我也知道,这等于用回了之前安装系统时默认的显示驱动了。

有点郁闷,白忙活那么久!


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2007-12-16 22:35 
头像

注册: 2007-10-06 18:40
帖子: 4313
送出感谢: 0 次
接收感谢: 5
驱动太旧,用 NVIDIA-Linux-x86-96.43.01-pkg1.run 到nvidia官方网站上下
我的显卡是nvidia mx440/400 和你的也差不多,完全能用compiz fusion
这是我的/etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 5 19:29:10 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"
FontPath "/usr/share/fonts/wenquanyi/wqy-zenhei/"
EndSection

Section "Module"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection

Section "Device"
Identifier "nVidia Corporation NV11 [GeForce2 MX/MX 400]"
Driver "nvidia"
Option "NoLogo"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV11 [GeForce2 MX/MX 400]"
Monitor "Generic Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 8 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译