当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 24 篇帖子 ]  前往页数 1, 2  下一页
作者 内容
1 楼 
 文章标题 : [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-09-19 21:49 

注册: 2007-12-16 21:59
帖子: 92
送出感谢: 0 次
接收感谢: 0 次
我的为什么这么做了之后还是不能够正常关机呢。
图形界面的关机进度条完了之后就停在那里 ,还是关闭电源
代码:
xiangbin@xiangbin-laptop:/var/log$ cat /etc/modules

fuse
lp
apm power_off=1


代码:
xiangbin@xiangbin-laptop:/var/log$ cat /boot/grub/menu.lst

default      0

timeout      10

color cyan/blue white/blue

title      Ubuntu 8.04.1, kernel 2.6.24-19-generic
root      (hd0,4)
kernel      /boot/vmlinuz-2.6.24-19-generic root=UUID=a0b13506-cb0d-4db0-a91a-84190b2cc732 ro quiet splash   acpi=force apm=power_off
initrd      /boot/initrd.img-2.6.24-19-generic
quiet

title      Ubuntu 8.04.1, kernel 2.6.24-19-generic (recovery mode)
root      (hd0,4)
kernel      /boot/vmlinuz-2.6.24-19-generic root=UUID=a0b13506-cb0d-4db0-a91a-84190b2cc732 ro single
initrd      /boot/initrd.img-2.6.24-19-generic

title      Ubuntu 8.04.1, memtest86+
root      (hd0,4)
kernel      /boot/memtest86+.bin
quiet

title      Other operating systems:
root

title      Microsoft Windows XP Professional
root      (hd0,0)
savedefault
makeactive
chainloader   +1



Dmesg 信息:
代码:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005f4f8000 (usable)
[    0.000000]  BIOS-e820: 000000005f4f8000 - 000000005f500000 (reserved)
[    0.000000]  BIOS-e820: 000000005f500000 - 000000005f5bd000 (usable)
[    0.000000]  BIOS-e820: 000000005f5bd000 - 000000005f5bf000 (reserved)
[    0.000000]  BIOS-e820: 000000005f5bf000 - 000000005f671000 (usable)
[    0.000000]  BIOS-e820: 000000005f671000 - 000000005f6bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005f6bf000 - 000000005f700000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005f700000 - 0000000060000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] 630MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000fe060
[    0.000000] Entering add_active_range(0, 0, 390769) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   390769
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   390769
[    0.000000] On node 0 totalpages: 390769
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1260 pages used for memmap
[    0.000000]   HighMem zone: 160133 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FE020 checksum 0
[    0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
[    0.000000] ACPI: RSDT 5F6FE038, 0030 (r1 INTEL  H2O             1       1000013)
[    0.000000] ACPI: FACP 5F6FD000, 0074 (r1 INTEL  H2O             1 MSFT  1000013)
[    0.000000] ACPI: DSDT 5F6F8000, 49B9 (r1 INTEL  H2O             1 MSFT  1000013)
[    0.000000] ACPI: FACS 5F682000, 0040
[    0.000000] ACPI: APIC 5F6F6000, 0068 (r1 INTEL  H2O             1 MSFT  1000013)
[    0.000000] ACPI: MCFG 5F6F4000, 003C (r1 INTEL  H2O             1 MSFT  1000013)
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 387717
[    0.000000] Kernel command line: root=UUID=a0b13506-cb0d-4db0-a91a-84190b2cc732 ro quiet splash acpi=force apm=power_off
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1596.015 MHz processor.
[   18.305608] Console: colour VGA+ 80x25
[   18.305612] console [tty0] enabled
[   18.305908] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   18.306313] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   18.385323] Memory: 1537220k/1563076k available (2177k kernel code, 24504k reserved, 1006k data, 368k init, 645532k highmem)
[   18.385332] virtual kernel memory layout:
[   18.385334]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   18.385335]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   18.385337]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   18.385338]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   18.385339]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   18.385341]       .data : 0xc03204c4 - 0xc041bdc4   (1006 kB)
[   18.385342]       .text : 0xc0100000 - 0xc03204c4   (2177 kB)
[   18.385346] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   18.385393] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   18.465350] Calibrating delay using timer specific routine.. 3196.04 BogoMIPS (lpj=6392088)
[   18.465382] Security Framework initialized
[   18.465391] SELinux:  Disabled at boot.
[   18.465407] AppArmor: AppArmor initialized
[   18.465411] Failure registering capabilities with primary security module.
[   18.465422] Mount-cache hash table entries: 512
[   18.465560] Initializing cgroup subsys ns
[   18.465567] Initializing cgroup subsys cpuacct
[   18.465579] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 0000c109 00000000 00000000 00000000
[   18.465589] monitor/mwait feature present.
[   18.465591] using mwait in idle threads.
[   18.465596] CPU: L1 I cache: 32K, L1 D cache: 32K
[   18.465598] CPU: L2 cache: 1024K
[   18.465602] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002940 0000c109 00000000 00000000 00000000
[   18.465612] Compat vDSO mapped to ffffe000.
[   18.465628] Checking 'hlt' instruction... OK.
[   18.481780] SMP alternatives: switching to UP code
[   18.483658] Freeing SMP alternatives: 11k freed
[   18.483776] Early unpacking initramfs... done
[   18.867684] ACPI: Core revision 20070126
[   18.867747] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   18.916701] CPU0: Intel(R) Celeron(R) M CPU        420  @ 1.60GHz stepping 08
[   18.916727] Total of 1 processors activated (3196.04 BogoMIPS).
[   18.916926] ENABLING IO-APIC IRQs
[   18.917130] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   19.060882] Brought up 1 CPUs
[   19.060908] CPU0 attaching sched-domain:
[   19.060911]  domain 0: span 01
[   19.060912]   groups: 01
[   19.061081] net_namespace: 64 bytes
[   19.061095] Booting paravirtualized kernel on bare hardware
[   19.061589] Time: 20:03:59  Date: 09/19/08
[   19.061614] NET: Registered protocol family 16
[   19.061819] EISA bus registered
[   19.061848] ACPI: bus type pci registered
[   19.063157] PCI: Using configuration type 1
[   19.063185] Setting up standard PCI resources
[   19.064884] ACPI: EC: Look up EC in DSDT
[   19.066948] ACPI: Interpreter enabled
[   19.066952] ACPI: (supports S0 S1 S3 S4 S5)
[   19.066970] ACPI: Using IOAPIC for interrupt routing
[   19.185677] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   19.505717] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[   19.505720] ACPI: EC: driver started in interrupt mode
[   19.505764] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   19.506607] Force enabled HPET at base address 0xfed00000
[   19.506614] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[   19.506618] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[   19.507499] PCI: Transparent bridge - 0000:00:1e.0
[   19.507547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   19.507853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[   19.508048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[   19.508179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[   19.508311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[   19.510955] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[   19.511064] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[   19.511168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[   19.511272] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[   19.511375] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[   19.511479] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[   19.511583] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[   19.511687] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[   19.511813] Linux Plug and Play Support v0.97 (c) Adam Belay
[   19.511850] pnp: PnP ACPI init
[   19.511858] ACPI: bus type pnp registered
[   19.632168] pnp: PnP ACPI: found 8 devices
[   19.632171] ACPI: ACPI bus type pnp unregistered
[   19.632176] PnPBIOS: Disabled by ACPI PNP
[   19.632416] PCI: Using ACPI for IRQ routing
[   19.632419] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   19.648331] NET: Registered protocol family 8
[   19.648334] NET: Registered protocol family 20
[   19.648505] hpet clockevent registered
[   19.648512] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   19.648516] hpet0: 3 64-bit timers, 14318180 Hz
[   19.649559] AppArmor: AppArmor Filesystem Enabled
[   19.652317] Time: tsc clocksource has been installed.
[   19.660349] system 00:01: ioport range 0x164e-0x164f has been reserved
[   19.660353] system 00:01: ioport range 0x600-0x60f has been reserved
[   19.660356] system 00:01: ioport range 0x610-0x610 has been reserved
[   19.660362] system 00:01: ioport range 0x800-0x80f has been reserved
[   19.660365] system 00:01: ioport range 0x400-0x47f has been reserved
[   19.660368] system 00:01: ioport range 0x500-0x53f has been reserved
[   19.660371] system 00:01: ioport range 0x378-0x37f has been reserved
[   19.660374] system 00:01: ioport range 0x778-0x77f has been reserved
[   19.660378] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[   19.660382] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[   19.660385] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[   19.660389] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[   19.660392] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[   19.660395] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[   19.660399] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[   19.690818] PCI: Bridge: 0000:00:1c.0
[   19.690821]   IO window: 4000-4fff
[   19.690828]   MEM window: 85200000-861fffff
[   19.690832]   PREFETCH window: 80000000-80ffffff
[   19.690839] PCI: Bridge: 0000:00:1c.1
[   19.690842]   IO window: 3000-3fff
[   19.690848]   MEM window: 84100000-851fffff
[   19.690853]   PREFETCH window: 81000000-81ffffff
[   19.690859] PCI: Bridge: 0000:00:1c.2
[   19.690862]   IO window: 2000-2fff
[   19.690868]   MEM window: 83100000-840fffff
[   19.690873]   PREFETCH window: 82000000-82ffffff
[   19.690879] PCI: Bridge: 0000:00:1e.0
[   19.690882]   IO window: 1000-1fff
[   19.690888]   MEM window: 83000000-830fffff
[   19.690893]   PREFETCH window: disabled.
[   19.690926] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   19.690935] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   19.690959] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   19.690966] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   19.690990] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   19.690997] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   19.691011] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   19.691023] NET: Registered protocol family 2
[   19.728313] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   19.728557] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   19.729370] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   19.729782] TCP: Hash tables configured (established 131072 bind 65536)
[   19.729786] TCP reno registered
[   19.740412] checking if image is initramfs... it is
[   20.151889] Switched to high resolution mode on CPU 0
[   20.487377] Freeing initrd memory: 7329k freed
[   20.488099] audit: initializing netlink socket (disabled)
[   20.488116] audit(1221854639.768:1): initialized
[   20.488306] highmem bounce pool size: 64 pages
[   20.490312] VFS: Disk quotas dquot_6.5.1
[   20.490389] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   20.490525] io scheduler noop registered
[   20.490528] io scheduler anticipatory registered
[   20.490530] io scheduler deadline registered
[   20.490542] io scheduler cfq registered (default)
[   20.490555] Boot video device is 0000:00:02.0
[   20.490859] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   20.490918] assign_interrupt_mode Found MSI capability
[   20.490970] Allocate Port Service[0000:00:1c.0:pcie00]
[   20.491009] Allocate Port Service[0000:00:1c.0:pcie02]
[   20.491114] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   20.491173] assign_interrupt_mode Found MSI capability
[   20.491220] Allocate Port Service[0000:00:1c.1:pcie00]
[   20.491256] Allocate Port Service[0000:00:1c.1:pcie02]
[   20.491361] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   20.491419] assign_interrupt_mode Found MSI capability
[   20.491482] Allocate Port Service[0000:00:1c.2:pcie00]
[   20.491517] Allocate Port Service[0000:00:1c.2:pcie02]
[   20.491779] isapnp: Scanning for PnP cards...
[   20.845905] isapnp: No Plug & Play device found
[   20.875457] Real Time Clock Driver v1.12ac
[   20.875572] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   20.876820] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   20.876892] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   20.876997] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[   20.882651] i8042.c: Detected active multiplexing controller, rev 1.1.
[   20.885059] serio: i8042 KBD port at 0x60,0x64 irq 1
[   20.885063] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   20.885066] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   20.885068] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   20.885071] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   20.887177] mice: PS/2 mouse device common for all mice
[   20.887290] EISA: Probing bus 0 at eisa.0
[   20.887298] Cannot allocate resource for EISA slot 1
[   20.887300] Cannot allocate resource for EISA slot 2
[   20.887302] Cannot allocate resource for EISA slot 3
[   20.887305] Cannot allocate resource for EISA slot 4
[   20.887307] Cannot allocate resource for EISA slot 5
[   20.887322] EISA: Detected 0 cards.
[   20.887325] cpuidle: using governor ladder
[   20.887327] cpuidle: using governor menu
[   20.887421] NET: Registered protocol family 1
[   20.887448] Using IPI No-Shortcut mode
[   20.887479] registered taskstats version 1
[   20.887570]   Magic number: 8:82:94
[   20.887680] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   20.887682] EDD information not available.
[   20.887869] Freeing unused kernel memory: 368k freed
[   20.892388] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   22.126459] fuse init (API version 7.9)
[   22.149451] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   22.149458] ACPI: Processor [CPU0] (supports 8 throttling states)
[   22.149472] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   22.154542] ACPI: Thermal Zone [TZ0] (62 C)
[   22.841206] usbcore: registered new interface driver usbfs
[   22.841232] usbcore: registered new interface driver hub
[   22.851382] usbcore: registered new device driver usb
[   22.871020] USB Universal Host Controller Interface driver v3.0
[   22.871085] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 22 (level, low) -> IRQ 19
[   22.871097] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   22.871102] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   22.871322] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   22.871359] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00005080
[   22.871503] usb usb1: configuration #1 chosen from 1 choice
[   22.871529] hub 1-0:1.0: USB hub found
[   22.871535] hub 1-0:1.0: 2 ports detected
[   22.950124] SCSI subsystem initialized
[   22.973141] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[   22.973154] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   22.973159] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   22.973183] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   22.973220] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005060
[   22.973340] usb usb2: configuration #1 chosen from 1 choice
[   22.973365] hub 2-0:1.0: USB hub found
[   22.973371] hub 2-0:1.0: 2 ports detected
[   23.024966] libata version 3.00 loaded.
[   23.030396] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   23.077033] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   23.077047] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   23.077052] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   23.077076] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   23.077110] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[   23.077226] usb usb3: configuration #1 chosen from 1 choice
[   23.077250] hub 3-0:1.0: USB hub found
[   23.077256] hub 3-0:1.0: 2 ports detected
[   23.180919] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
[   23.180932] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   23.180937] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   23.180962] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   23.180996] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00005020
[   23.181113] usb usb4: configuration #1 chosen from 1 choice
[   23.181137] hub 4-0:1.0: USB hub found
[   23.181142] hub 4-0:1.0: 2 ports detected
[   23.284915] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 22 (level, low) -> IRQ 19
[   23.284932] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   23.284936] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   23.284965] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   23.288881] ehci_hcd 0000:00:1d.7: debug port 1
[   23.288888] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   23.288896] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x86344400
[   23.316686] usb 2-2: new low speed USB device using uhci_hcd and address 2
[   23.328689] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   23.328847] usb usb5: configuration #1 chosen from 1 choice
[   23.328872] hub 5-0:1.0: USB hub found
[   23.328879] hub 5-0:1.0: 8 ports detected
[   23.432780] 8139cp 0000:04:04.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[   23.432786] 8139cp 0000:04:04.0: Try the "8139too" driver instead.
[   23.436389] ata_piix 0000:00:1f.2: version 2.12
[   23.436397] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[   23.436433] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[   23.436470] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   23.437467] 8139too Fast Ethernet driver 0.9.28
[   23.438063] scsi0 : ata_piix
[   23.438678] scsi1 : ata_piix
[   23.439593] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x50a0 irq 14
[   23.439596] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50a8 irq 15
[   23.616914] ata1.00: ATA-7: SAMSUNG HM040HI, YA100-04, max UDMA7
[   23.616919] ata1.00: 78242976 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   23.632829] ata1.00: configured for UDMA/133
[   23.788402] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM040HI  YA10 PQ: 0 ANSI: 5
[   23.792240] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 20 (level, low) -> IRQ 21
[   23.792255] PCI: Setting latency timer of device 0000:04:04.0 to 64
[   23.793261] eth0: RealTek RTL8139 at 0x1000, 00:40:d0:90:fc:94, IRQ 21
[   23.793265] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   23.804873] Driver 'sd' needs updating - please use bus_type methods
[   23.804958] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[   23.804971] sd 0:0:0:0: [sda] Write Protect is off
[   23.804974] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.804992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.805042] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[   23.805052] sd 0:0:0:0: [sda] Write Protect is off
[   23.805055] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.805071] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.805075]  sda:<6>usb 2-2: new low speed USB device using uhci_hcd and address 3
[   24.033821] usb 2-2: configuration #1 chosen from 1 choice
[   24.055418] usbcore: registered new interface driver hiddev
[   24.067954] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
[   24.079959] input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-2
[   24.079974] usbcore: registered new interface driver usbhid
[   24.079979] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   24.239233]  sda1 sda2 < sda5 sda6 >
[   24.285313] sd 0:0:0:0: [sda] Attached SCSI disk
[   24.291430] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   24.749431] Attempting manual resume
[   24.749435] swsusp: Resume From Partition 8:6
[   24.749437] PM: Checking swsusp image.
[   24.749689] PM: Resume from disk failed.
[   24.791565] kjournald starting.  Commit interval 5 seconds
[   24.791578] EXT3-fs: mounted filesystem with ordered data mode.
[   36.048098] Linux agpgart interface v0.102
[   36.081864] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   36.148044] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   36.201544] iTCO_vendor_support: vendor-support=0
[   36.251897] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   36.251994] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[   36.252030] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   36.327902] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   36.387805] agpgart: Detected an Intel 945GM Chipset.
[   36.388128] agpgart: Detected 7932K stolen memory.
[   36.405453] agpgart: AGP aperture is 256M @ 0x70000000
[   36.623520] intel_rng: FWH not detected
[   36.819491] input: Power Button (FF) as /devices/virtual/input/input4
[   36.835313] ACPI: Power Button (FF) [PWRF]
[   36.835418] input: Lid Switch as /devices/virtual/input/input5
[   36.840135] ACPI: Lid Switch [LID0]
[   36.840217] input: Sleep Button (CM) as /devices/virtual/input/input6
[   36.851276] ACPI: Sleep Button (CM) [SLPB]
[   36.979254] ACPI: AC Adapter [AC] (on-line)
[   37.207797] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[   37.207802] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[   37.207931] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   37.207947] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   37.207973] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   37.289000] ACPI: Battery Slot [BAT0] (battery present)
[   37.838659] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
[   37.878395] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   37.966275] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 23 (level, low) -> IRQ 22
[   37.966306] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   37.999986] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   38.378300] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   38.401800] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
[   40.602399] iwl3945: Radio Frequency Kill Switch is On:
[   40.602402] Kill switch must be turned off for wireless networking to work.
[   40.607562] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[   40.617580] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[   40.637520] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[   40.664952] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[   40.731466] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
[   41.042022] lp: driver loaded but no devices found
[   41.095141] apm: BIOS not found.
[   41.268603] Adding 803208k swap on /dev/sda6.  Priority:-1 extents:1 across:803208k
[   42.037280] EXT3 FS on sda5, internal journal
[   43.790780] ip_tables: (C) 2000-2006 Netfilter Core Team
[   44.359217] No dock devices found.
[   46.001395] apm: BIOS not found.
[   46.198855] ppdev: user-space parallel port driver
[   46.480293] audit(1221825866.640:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4765 profile="/usr/sbin/cupsd" namespace="default"
[   47.643103] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   47.890020] Bluetooth: Core ver 2.11
[   47.890621] NET: Registered protocol family 31
[   47.890626] Bluetooth: HCI device and connection manager initialized
[   47.890630] Bluetooth: HCI socket layer initialized
[   47.964305] Bluetooth: L2CAP ver 2.9
[   47.964309] Bluetooth: L2CAP socket layer initialized
[   48.063641] Bluetooth: RFCOMM socket layer initialized
[   48.063657] Bluetooth: RFCOMM TTY layer initialized
[   48.063659] Bluetooth: RFCOMM ver 1.8
[   51.833016] [drm] Initialized drm 1.1.0 20060810
[   51.863877] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   51.863886] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   51.863971] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   51.882035] mtrr: type mismatch for 70000000,10000000 old: write-back new: write-combining
[   51.945939] NET: Registered protocol family 17
[   56.763358] NET: Registered protocol family 10
[   56.763814] lo: Disabled Privacy Extensions
[   66.873572] eth0: no IPv6 routers present


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2008-09-19 22:09 

注册: 2008-04-08 19:53
帖子: 5
送出感谢: 0 次
接收感谢: 0 次
我的也是。烦死了。


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2008-09-19 22:16 

注册: 2007-12-16 21:59
帖子: 92
送出感谢: 0 次
接收感谢: 0 次
看来不是我一个人的问题哦。

我在网上搜索到的方法都试过了,根本 就不行。

我怀疑这个是8.04的一个BUG啊。

别人都说LINUX的电源管理能力弱。我比较赞同。以前用别的版本LINUX也总遇到不能关机的问题。


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2008-09-20 20:48 

注册: 2007-12-16 21:59
帖子: 92
送出感谢: 0 次
接收感谢: 0 次
顶起来。
没有人知道啊,郁闷。


页首
 用户资料  
 
5 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-09-23 19:47 

注册: 2008-09-22 19:01
帖子: 8
送出感谢: 0 次
接收感谢: 0 次
我的也是,不过我是不能重启,一重启就死机了。


页首
 用户资料  
 
6 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-09-24 14:22 

注册: 2007-12-16 21:59
帖子: 92
送出感谢: 0 次
接收感谢: 0 次
看来还真的不是一个人的问题。为什么都没有谁出来解决一下啊。


页首
 用户资料  
 
7 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-09-25 16:34 

注册: 2008-09-23 0:34
帖子: 6
送出感谢: 0 次
接收感谢: 0 次
我也是这种情况,不能关机。郁闷!


页首
 用户资料  
 
8 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-09-26 2:11 

注册: 2007-04-20 23:21
帖子: 94
送出感谢: 0 次
接收感谢: 0 次
我的也是一样,我想可能因为主板的BIOS的问题,安装的时候如果不选择ACPI=OFF就不能进入系统,开机后风扇转个不停,温度很高,关机也关不了。这些可能和主板有关系,因为笔记本设计都不一样,对于LINUX在没有厂商技术支持的情况下,肯定会有这些问题。我们只能等待该更多的电脑厂商对LINUX更多的关注。


页首
 用户资料  
 
9 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-09-26 17:38 

注册: 2007-12-16 21:59
帖子: 92
送出感谢: 0 次
接收感谢: 0 次
govi 写道:
我的也是一样,我想可能因为主板的BIOS的问题,安装的时候如果不选择ACPI=OFF就不能进入系统,开机后风扇转个不停,温度很高,关机也关不了。这些可能和主板有关系,因为笔记本设计都不一样,对于LINUX在没有厂商技术支持的情况下,肯定会有这些问题。我们只能等待该更多的电脑厂商对LINUX更多的关注。


你的这个更残。我的基本就是不能正常关机这一个问题。别的都还好。大部分功能键都还能用。


页首
 用户资料  
 
10 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-09-30 15:53 

注册: 2007-12-16 21:59
帖子: 92
送出感谢: 0 次
接收感谢: 0 次
这么多人都有问题,怎么没有人知道怎么解决吗?


页首
 用户资料  
 
11 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-09-30 15:57 
头像

注册: 2006-09-02 14:18
帖子: 5308
地址: 汉桑城
送出感谢: 1
接收感谢: 1
acpi的问题


_________________
全世界linux爱好者联合起来 !
一切闭源操作系统都是纸老虎 !
要斗私批修,拒绝黑屏,使用linux !
让一部分人先用起Archlinux来 !
linux是第一生产力 !
讲正气,讲开源,讲free
要坚定不移的走开源的道路 !
linux明天会更好 !

dpkg -l |grep ^rc|awk '{print $2}' |tr ["\n"] [" "]|sudo xargs dpkg -P -
ubuntu粉丝群 26660836 已满员


页首
 用户资料  
 
12 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-09-30 16:26 
头像

注册: 2008-04-17 17:53
帖子: 689
地址: 江苏.无锡
送出感谢: 0 次
接收感谢: 1
就是ACPI的问题,我以前把换显卡的时候说是bios版本低不让用,结果我就把acpi关掉了,结果进ubuntu就不可以自动关掉电源,后来我对bios进行了更新,然后开启了acpi就没有问题了!


页首
 用户资料  
 
13 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-10-03 21:16 

注册: 2007-12-16 21:59
帖子: 92
送出感谢: 0 次
接收感谢: 0 次
那我的这个怎么办,难道要刷BIOS?


页首
 用户资料  
 
14 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-10-03 21:28 
头像

注册: 2006-09-19 18:16
帖子: 3711
送出感谢: 0 次
接收感谢: 3
把 apm=power_off 去掉能启动吗?能的话,试试能不能关机

若还不行,试试用 acpi=off noapic nolapic 能不能关机


_________________
Ubuntu 系统备份、恢复、克隆、批量部署、制作 live 系统


页首
 用户资料  
 
15 楼 
 文章标题 : Re: [问题]UB8.04不能正常关机(关机时不能关闭电源)
帖子发表于 : 2008-10-03 21:30 
头像

注册: 2006-09-19 18:16
帖子: 3711
送出感谢: 0 次
接收感谢: 3
玄原 写道:
看来还真的不是一个人的问题。为什么都没有谁出来解决一下啊。


其实该解决这个问题的是你的电脑的生产商,做的acpi 不标准,也不测试下 ubuntu

建议你以后买别的牌子


_________________
Ubuntu 系统备份、恢复、克隆、批量部署、制作 live 系统


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 24 篇帖子 ]  前往页数 1, 2  下一页

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译