新手求助!!!请问怎样在索尼的CW笔记本上开启双屏输出?

笔记本/超便携移动PC软硬件相关支持,包括硬件、安装和驱动等
回复
Lumpython
帖子: 1
注册时间: 2011-03-14 23:30
送出感谢: 0
接收感谢: 0

新手求助!!!请问怎样在索尼的CW笔记本上开启双屏输出?

#1

帖子 Lumpython » 2011-03-14 23:57

索尼的笔记本真是有够悲剧。
因为那该死的SoftEDID,屏幕死活点不亮。。
最后在网上看了教程后终于点亮了屏幕,可又发现HDMI输出又不行了。。
现在的情况是这样
删除Xorg.conf后nvidia的驱动能认出外接HDMI上的显示器。分辨率各项都没问题。
但笔记本上的屏幕就点不亮了,nvidia也认不到。

如果在Xorgconf里加上原本能让笔记本点亮的数据后,笔记本能点亮了,但外接的屏幕就点不亮了。
nvidia又认不到外接的屏幕了。。。

自己尝试了添加Twinview参数。结果开机两个都黑屏。
无奈之下只能放弃。


请问有没有什么方法能让两个屏幕都能点亮呢?
或者各位能不能贴出双屏显示的Xorg。conf来参考一下?

贴出本人的xorgconf。。麻烦各位看看哪里有问题?

代码: 全选

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder75)  Thu Apr 22 11:44:23 PDT 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    Option         "ConnectedMonitor" "DFP-0"
    Option         "CustomEDID" "DFP-0:/etc/X11/sonycw.bin"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
回复

回到 “笔记本、UMPC支持”