高手求助vista与ubuntu双系统的问题

[benny52317]

我用的thinkpad-t61的机器，装得是厂家自带的visita系统，我先装的ubuntu后装的vista
第一个分区为恢复vista的那个隐藏分区
第二个分区为vista的系统分区
后面有几个NTFS的逻辑分区
最后是我的ubuntu
当我安装完ubuntu后重启系统，grub不能正确引导我的vista，（hd0,0）与（hd0,1）引导的都是恢复vista的那个隐藏分区
不知道这事为什么？？？
请高手指教，不胜感激！！！
/boot/grub下的menu.list文件内容如下：
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=d0e380f6-42dd-4494-842f-da94024153f9 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,9)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=zh_CN

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.04.1, kernel 2.6.24-19-generic
root (hd0,9)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=d0e380f6-42dd-4494-842f-da94024153f9 ro quiet splash locale=zh_CN
initrd /boot/initrd.img-2.6.24-19-generic
quiet

title Ubuntu 8.04.1, kernel 2.6.24-19-generic (recovery mode)
root (hd0,9)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=d0e380f6-42dd-4494-842f-da94024153f9 ro single
initrd /boot/initrd.img-2.6.24-19-generic

title Ubuntu 8.04.1, memtest86+
root (hd0,9)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

[jkll]

用livecd 进系统用gparted看看你的vista在hd几，再改

[benny52317]

是/dev/sda2
我就一块硬盘应该是hd0
（hd0.0）（hd0.1）（hd0.2）（hd0.3）我都试过了，都不行
（hd0.0）（hd0.1）引导的结果是一样的，都是恢复vista的那个隐藏分区
（hd0.2）（hd0.3）是错误的，什么也引导不起来
这事怎么回事阿？？？

[xyesterday]

个人觉得这个应该就是进入到VISTA的启动项值..
要是不行,你试一下:
sodu grub
find/boot/grub/stage1
这时命令会返回一个值(hd?,?),
root(hd?,?) 你的应该是:hd0,1 系统应该会返回hd0,9,但你要把第二个罗辑区设定为启动盘,试一下变为1啊!!!
setup(hd0)
设定好后重启一遍再看一下的呀!

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

[billbear]

这个比较奇怪，但是楼上的办法就不要试了。
提供一下
sudo fdisk -l
的输出信息。

[benny52317]

真不明白这是为什么？？？