当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 1 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : ubuntu8.10开机出现奇怪的警报
帖子发表于 : 2008-11-01 22:19 

注册: 2008-06-08 0:27
帖子: 4
送出感谢: 0 次
接收感谢: 0 次
我是从8.04升级到8.10的,在启动时会出现难听的警报声,进入系统后风扇一直吹着不停,不知道是哪出了问题
我的电脑配置:
中央处理器:Intel Core(TM) Conroe Processor 芯片组:Intel 2A00h 主硬盘:TOSHIBA MK1246GSX 显卡:NVIDIA GeForce 8400M GS 网卡:Broadcom NetLink(TM) Fast Ethernet
下边是dmesg的内容:
代码:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-7-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Oct 30 04:18:38 UTC 2008 (Ubuntu 2.6.27-7.15-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable)
[    0.000000]  BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x100000
[    0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[    0.000000] RAMDISK: 37848000 - 37fef728
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000FBBF0, 0024 (r2 DELL  )
[    0.000000] ACPI: XSDT 7FE6F200, 005C (r1 DELL    M08     27D80203 ASL        61)
[    0.000000] ACPI: FACP 7FE6F09C, 00F4 (r4 DELL    M08     27D80203 ASL        61)
[    0.000000] ACPI: DSDT 7FE6F800, 5676 (r2 INT430 SYSFexxx     1001 INTL 20050624)
[    0.000000] ACPI: FACS 7FE7E000, 0040
[    0.000000] ACPI: HPET 7FE6F300, 0038 (r1 DELL    M08            1 ASL        61)
[    0.000000] ACPI: APIC 7FE6F400, 0068 (r1 DELL    M08     27D80203 ASL        47)
[    0.000000] ACPI: MCFG 7FE6F3C0, 003E (r16 DELL    M08     27D80203 ASL        61)
[    0.000000] ACPI: SLIC 7FE6F49C, 0176 (r1 DELL    M08     27D80203 ASL        61)
[    0.000000] ACPI: BOOT 7FE6EFC0, 0028 (r1 DELL    M08     27D80203 ASL        61)
[    0.000000] ACPI: SSDT 7FE6DA40, 04CC (r1  PmRef    CpuPm     3000 INTL 20050624)
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 38000000
[    0.000000]   low ram: 00000000 - 38000000
[    0.000000]   bootmap 00008000 - 0000f000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00005c0a20]    TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[    0.000000]   #4 [0037848000 - 0037fef728]          RAMDISK ==> [0037848000 - 0037fef728]
[    0.000000]   #5 [00005c1000 - 00005c4000]    INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[    0.000000]   #6 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00038000
[    0.000000]   HighMem  0x00038000 -> 0x0007fe6d
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fe6d
[    0.000000] On node 0 totalpages: 523788
[    0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 223300 pages, LIFO batch:31
[    0.000000]   HighMem zone: 291920 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:74000000)
[    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519183
[    0.000000] Kernel command line: root=UUID=42608037-738e-458e-8473-723da44e40b5 ro splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
[    0.000000] TSC: using PIT calibration value
[    0.000000] Detected 1661.913 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 2062188k/2095540k available (2572k kernel code, 32100k reserved, 1160k data, 424k init, 1178036k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc04ab000 - 0xc0515000   ( 424 kB)
[    0.004000]       .data : 0xc03832aa - 0xc04a5680   (1160 kB)
[    0.004000]       .text : 0xc0100000 - 0xc03832aa   (2572 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3323.82 BogoMIPS (lpj=6647652)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys memory
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] using mwait in idle threads.
[    0.004000] Checking 'hlt' instruction... OK.
[    0.018228] ACPI: Core revision 20080609
[    0.020392] ACPI: Checking initramfs for custom DSDT
[    0.398713] ENABLING IO-APIC IRQs
[    0.398985] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.438760] CPU0: Intel(R) Core(TM)2 Duo CPU     T5450  @ 1.66GHz stepping 0d
[    0.440027] Booting processor 1/1 ip 6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3323.89 BogoMIPS (lpj=6647795)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.528491] CPU1: Intel(R) Core(TM)2 Duo CPU     T5450  @ 1.66GHz stepping 0d
[    0.529145] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.532055] Brought up 2 CPUs
[    0.532130] Total of 2 processors activated (6647.72 BogoMIPS).
[    0.532225] CPU0 attaching sched-domain:
[    0.532229]  domain 0: span 0-1 level MC
[    0.532232]   groups: 0 1
[    0.532239] CPU1 attaching sched-domain:
[    0.532242]  domain 0: span 0-1 level MC
[    0.532245]   groups: 1 0
[    0.532328] net_namespace: 840 bytes
[    0.532328] Booting paravirtualized kernel on bare hardware
[    0.532492] Time: 13:09:39  Date: 11/01/08
[    0.532594] NET: Registered protocol family 16
[    0.532687] EISA bus registered
[    0.532687] ACPI: bus type pci registered
[    0.532687] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
[    0.532687] PCI: MCFG area at f4000000 reserved in E820
[    0.532687] PCI: Using MMCONFIG for extended config space
[    0.532687] PCI: Using configuration type 1 for base access
[    0.537159] ACPI: EC: Look up EC in DSDT
[    0.569411] ACPI: Interpreter enabled
[    0.569487] ACPI: (supports S0 S3 S4 S5)
[    0.572286] ACPI: Using IOAPIC for interrupt routing
[    0.624656] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.624656] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.624656] pci 0000:00:01.0: PME# disabled
[    0.624656] PCI: 0000:00:1a.0 reg 20 io port: [6f20, 6f3f]
[    0.624656] PCI: 0000:00:1a.1 reg 20 io port: [6f00, 6f1f]
[    0.624656] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fed1c400, fed1c7ff]
[    0.624656] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.624681] pci 0000:00:1a.7: PME# disabled
[    0.624807] PCI: 0000:00:1b.0 reg 10 64bit mmio: [febfc000, febfffff]
[    0.624868] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.624949] pci 0000:00:1b.0: PME# disabled
[    0.625103] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.625183] pci 0000:00:1c.0: PME# disabled
[    0.625337] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.625417] pci 0000:00:1c.1: PME# disabled
[    0.625572] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.625653] pci 0000:00:1c.3: PME# disabled
[    0.625808] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.625886] pci 0000:00:1c.5: PME# disabled
[    0.626012] PCI: 0000:00:1d.0 reg 20 io port: [6f80, 6f9f]
[    0.626085] PCI: 0000:00:1d.1 reg 20 io port: [6f60, 6f7f]
[    0.628099] PCI: 0000:00:1d.2 reg 20 io port: [6f40, 6f5f]
[    0.628178] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fed1c000, fed1c3ff]
[    0.628243] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.628324] pci 0000:00:1d.7: PME# disabled
[    0.628576] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.628669] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[    0.628778] PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7]
[    0.628788] PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7]
[    0.628797] PCI: 0000:00:1f.1 reg 18 io port: [170, 177]
[    0.628806] PCI: 0000:00:1f.1 reg 1c io port: [374, 377]
[    0.628816] PCI: 0000:00:1f.1 reg 20 io port: [6fa0, 6faf]
[    0.628879] PCI: 0000:00:1f.2 reg 10 io port: [6eb0, 6eb7]
[    0.628888] PCI: 0000:00:1f.2 reg 14 io port: [6eb8, 6ebb]
[    0.628897] PCI: 0000:00:1f.2 reg 18 io port: [6ec0, 6ec7]
[    0.628906] PCI: 0000:00:1f.2 reg 1c io port: [6ec8, 6ecb]
[    0.628916] PCI: 0000:00:1f.2 reg 20 io port: [6ee0, 6eef]
[    0.628925] PCI: 0000:00:1f.2 reg 24 io port: [eff0, efff]
[    0.628954] pci 0000:00:1f.2: PME# supported from D3hot
[    0.629033] pci 0000:00:1f.2: PME# disabled
[    0.629129] PCI: 0000:00:1f.3 reg 10 32bit mmio: [febfbf00, febfbfff]
[    0.629159] PCI: 0000:00:1f.3 reg 20 io port: [10c0, 10df]
[    0.629246] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
[    0.629257] PCI: 0000:01:00.0 reg 14 32bit mmio: [e0000000, efffffff]
[    0.629283] PCI: 0000:01:00.0 reg 1c 64bit mmio: [fa000000, fbffffff]
[    0.629293] PCI: 0000:01:00.0 reg 24 io port: [df00, df7f]
[    0.629304] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[    0.629392] PCI: bridge 0000:00:01.0 io port: [d000, dfff]
[    0.629396] PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, feafffff]
[    0.629402] PCI: bridge 0000:00:01.0 64bit mmio pref: [e0000000, efffffff]
[    0.629674] PCI: 0000:0c:00.0 reg 10 32bit mmio: [f9fff000, f9ffffff]
[    0.629892] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[    0.629989] pci 0000:0c:00.0: PME# disabled
[    0.630126] PCI: bridge 0000:00:1c.1 32bit mmio: [f9f00000, f9ffffff]
[    0.630205] PCI: bridge 0000:00:1c.3 io port: [c000, cfff]
[    0.630211] PCI: bridge 0000:00:1c.3 32bit mmio: [f9c00000, f9efffff]
[    0.630220] PCI: bridge 0000:00:1c.3 64bit mmio pref: [f0000000, f01fffff]
[    0.630421] PCI: 0000:09:00.0 reg 10 64bit mmio: [f9bf0000, f9bfffff]
[    0.630583] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.630669] pci 0000:09:00.0: PME# disabled
[    0.630806] PCI: bridge 0000:00:1c.5 32bit mmio: [f9b00000, f9bfffff]
[    0.630865] PCI: 0000:03:01.0 reg 10 32bit mmio: [f9aff800, f9afffff]
[    0.630930] pci 0000:03:01.0: supports D1
[    0.630932] pci 0000:03:01.0: supports D2
[    0.630934] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.631014] pci 0000:03:01.0: PME# disabled
[    0.631128] PCI: 0000:03:01.1 reg 10 32bit mmio: [f9aff500, f9aff5ff]
[    0.631194] pci 0000:03:01.1: supports D1
[    0.631195] pci 0000:03:01.1: supports D2
[    0.631198] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.631278] pci 0000:03:01.1: PME# disabled
[    0.631391] PCI: 0000:03:01.2 reg 10 32bit mmio: [f9aff600, f9aff6ff]
[    0.631456] pci 0000:03:01.2: supports D1
[    0.631458] pci 0000:03:01.2: supports D2
[    0.631461] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.631541] pci 0000:03:01.2: PME# disabled
[    0.631655] PCI: 0000:03:01.3 reg 10 32bit mmio: [f9aff700, f9aff7ff]
[    0.631719] pci 0000:03:01.3: supports D1
[    0.631721] pci 0000:03:01.3: supports D2
[    0.631723] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.631803] pci 0000:03:01.3: PME# disabled
[    0.631949] pci 0000:00:1e.0: transparent bridge
[    0.632035] PCI: bridge 0000:00:1e.0 32bit mmio: [f9a00000, f9afffff]
[    0.632084] bus 00 -> node 0
[    0.632092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.632722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.632938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.633085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.633260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.633435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.633608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.648845] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
[    0.648845] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[    0.649321] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[    0.653744] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[    0.654383] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.655375] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.656393] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.657368] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.658395] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.658395] pnp: PnP ACPI init
[    0.658395] ACPI: bus type pnp registered
[    0.684691] pnp 00:09: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[    0.684691] pnp 00:09: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[    0.684713] pnp 00:0a: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[    0.684713] pnp 00:0a: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[    0.684713] pnp 00:0a: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[    0.684713] pnp 00:0a: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[    0.716796] pnp: PnP ACPI: found 12 devices
[    0.716796] ACPI: ACPI bus type pnp unregistered
[    0.716796] PnPBIOS: Disabled by ACPI PNP
[    0.716796] PCI: Using ACPI for IRQ routing
[    0.724042] NET: Registered protocol family 8
[    0.724118] NET: Registered protocol family 20
[    0.724208] NetLabel: Initializing
[    0.724208] NetLabel:  domain hash size = 128
[    0.724208] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.724284] NetLabel:  unlabeled traffic allowed by default
[    0.724366] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.724668] hpet0: 3 64-bit timers, 14318180 Hz
[    0.726325] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.726404]    actual entries 65620
[    0.726569] AppArmor: AppArmor Filesystem Enabled
[    0.726670] ACPI: RTC can wake from S4
[    0.728041] Switched to high resolution mode on CPU 0
[    0.729294] Switched to high resolution mode on CPU 1
[    0.732029] system 00:05: ioport range 0xc80-0xcff could not be reserved
[    0.732115] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.732198] system 00:09: ioport range 0x900-0x97f has been reserved
[    0.732276] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[    0.732359] system 00:0a: ioport range 0xf400-0xf4fe has been reserved
[    0.732437] system 00:0a: ioport range 0x1080-0x10bf has been reserved
[    0.732516] system 00:0a: ioport range 0x10c0-0x10df has been reserved
[    0.732596] system 00:0a: ioport range 0x809-0x809 has been reserved
[    0.732678] system 00:0b: iomem range 0x0-0x9efff could not be reserved
[    0.732756] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
[    0.732835] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[    0.732914] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[    0.732993] system 00:0b: iomem range 0x100000-0x7fe6d7ff could not be reserved
[    0.733083] system 00:0b: iomem range 0x7fe6d800-0x7fefffff could not be reserved
[    0.733174] system 00:0b: iomem range 0x7ff00000-0x7fffffff could not be reserved
[    0.733265] system 00:0b: iomem range 0x7ff00000-0x806fffff could not be reserved
[    0.733356] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.733446] system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved
[    0.733525] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved
[    0.733615] system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved
[    0.733706] system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved
[    0.733796] system 00:0b: iomem range 0xfeda0000-0xfeda3fff could not be reserved
[    0.733886] system 00:0b: iomem range 0xfeda4000-0xfeda4fff could not be reserved
[    0.733976] system 00:0b: iomem range 0xfeda5000-0xfeda5fff could not be reserved
[    0.734065] system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved
[    0.734144] system 00:0b: iomem range 0xfed18000-0xfed1bfff could not be reserved
[    0.734234] system 00:0b: iomem range 0xf4000000-0xf7ffffff could not be reserved
[    0.769542] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.769620] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.769699] pci 0000:00:01.0:   MEM window: 0xfa000000-0xfeafffff
[    0.769777] pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.769870] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[    0.769947] pci 0000:00:1c.0:   IO window: disabled
[    0.770027] pci 0000:00:1c.0:   MEM window: disabled
[    0.770105] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.770188] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[    0.770264] pci 0000:00:1c.1:   IO window: disabled
[    0.770345] pci 0000:00:1c.1:   MEM window: 0xf9f00000-0xf9ffffff
[    0.770425] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.770507] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
[    0.770584] pci 0000:00:1c.3:   IO window: 0xc000-0xcfff
[    0.770665] pci 0000:00:1c.3:   MEM window: 0xf9c00000-0xf9efffff
[    0.770745] pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
[    0.770841] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
[    0.770918] pci 0000:00:1c.5:   IO window: disabled
[    0.770999] pci 0000:00:1c.5:   MEM window: 0xf9b00000-0xf9bfffff
[    0.771078] pci 0000:00:1c.5:   PREFETCH window: disabled
[    0.771161] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.771237] pci 0000:00:1e.0:   IO window: disabled
[    0.771317] pci 0000:00:1e.0:   MEM window: 0xf9a00000-0xf9afffff
[    0.771397] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.771489] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.771568] pci 0000:00:01.0: setting latency timer to 64
[    0.771578] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.771660] pci 0000:00:1c.0: setting latency timer to 64
[    0.771672] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.771753] pci 0000:00:1c.1: setting latency timer to 64
[    0.771765] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.771846] pci 0000:00:1c.3: setting latency timer to 64
[    0.771856] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.771938] pci 0000:00:1c.5: setting latency timer to 64
[    0.771948] pci 0000:00:1e.0: setting latency timer to 64
[    0.771953] bus: 00 index 0 io port: [0, ffff]
[    0.772032] bus: 00 index 1 mmio: [0, ffffffff]
[    0.772107] bus: 01 index 0 io port: [d000, dfff]
[    0.772181] bus: 01 index 1 mmio: [fa000000, feafffff]
[    0.772257] bus: 01 index 2 mmio: [e0000000, efffffff]
[    0.772332] bus: 01 index 3 mmio: [0, 0]
[    0.772406] bus: 0b index 0 mmio: [0, 0]
[    0.772479] bus: 0b index 1 mmio: [0, 0]
[    0.772553] bus: 0b index 2 mmio: [0, 0]
[    0.772627] bus: 0b index 3 mmio: [0, 0]
[    0.772701] bus: 0c index 0 mmio: [0, 0]
[    0.772775] bus: 0c index 1 mmio: [f9f00000, f9ffffff]
[    0.772850] bus: 0c index 2 mmio: [0, 0]
[    0.772923] bus: 0c index 3 mmio: [0, 0]
[    0.772997] bus: 0d index 0 io port: [c000, cfff]
[    0.773072] bus: 0d index 1 mmio: [f9c00000, f9efffff]
[    0.773148] bus: 0d index 2 mmio: [f0000000, f01fffff]
[    0.773223] bus: 0d index 3 mmio: [0, 0]
[    0.773298] bus: 09 index 0 mmio: [0, 0]
[    0.773372] bus: 09 index 1 mmio: [f9b00000, f9bfffff]
[    0.773447] bus: 09 index 2 mmio: [0, 0]
[    0.773522] bus: 09 index 3 mmio: [0, 0]
[    0.773594] bus: 03 index 0 mmio: [0, 0]
[    0.773668] bus: 03 index 1 mmio: [f9a00000, f9afffff]
[    0.773743] bus: 03 index 2 mmio: [0, 0]
[    0.773816] bus: 03 index 3 io port: [0, ffff]
[    0.773891] bus: 03 index 4 mmio: [0, ffffffff]
[    0.773972] NET: Registered protocol family 2
[    0.788058] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.788391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.788866] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.789148] TCP: Hash tables configured (established 131072 bind 65536)
[    0.789227] TCP reno registered
[    0.796080] NET: Registered protocol family 1
[    0.796280] checking if image is initramfs... it is
[    1.565122] Freeing initrd memory: 7837k freed
[    1.565374] Simple Boot Flag at 0x79 set to 0x1
[    1.566523] audit: initializing netlink socket (disabled)
[    1.566621] type=2000 audit(1225544979.564:1): initialized
[    1.573723] highmem bounce pool size: 64 pages
[    1.573802] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.576601] VFS: Disk quotas dquot_6.5.1
[    1.576778] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.576974] msgmni has been set to 1743
[    1.577193] io scheduler noop registered
[    1.577269] io scheduler anticipatory registered
[    1.577345] io scheduler deadline registered
[    1.577431] io scheduler cfq registered (default)
[    1.577688] pci 0000:01:00.0: Boot video device
[    1.577836] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.577882] pcieport-driver 0000:00:01.0: found MSI capability
[    1.577997] pci_express 0000:00:01.0:pcie00: allocate port service
[    1.578048] pci_express 0000:00:01.0:pcie02: allocate port service
[    1.578096] pci_express 0000:00:01.0:pcie03: allocate port service
[    1.578205] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.578262] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.578392] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.578443] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.578491] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.578620] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.578677] pcieport-driver 0000:00:1c.1: found MSI capability
[    1.578809] pci_express 0000:00:1c.1:pcie00: allocate port service
[    1.578857] pci_express 0000:00:1c.1:pcie02: allocate port service
[    1.578905] pci_express 0000:00:1c.1:pcie03: allocate port service
[    1.579035] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    1.579091] pcieport-driver 0000:00:1c.3: found MSI capability
[    1.579220] pci_express 0000:00:1c.3:pcie00: allocate port service
[    1.579272] pci_express 0000:00:1c.3:pcie02: allocate port service
[    1.579319] pci_express 0000:00:1c.3:pcie03: allocate port service
[    1.579450] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.579506] pcieport-driver 0000:00:1c.5: found MSI capability
[    1.579637] pci_express 0000:00:1c.5:pcie00: allocate port service
[    1.579692] pci_express 0000:00:1c.5:pcie02: allocate port service
[    1.579747] pci_express 0000:00:1c.5:pcie03: allocate port service
[    1.580167] isapnp: Scanning for PnP cards...
[    1.934471] isapnp: No Plug & Play device found
[    1.971900] hpet_resources: 0xfed00000 is busy
[    1.972027] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.974548] brd: module loaded
[    1.974694] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.974920] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.978162] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.978242] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.981129] mice: PS/2 mouse device common for all mice
[    1.981345] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.981453] rtc0: alarms up to one month, y3k, hpet irqs
[    1.981686] EISA: Probing bus 0 at eisa.0
[    1.981813] EISA: Mainboard YW_FFFF detected.
[    1.983372] Cannot allocate resource for EISA slot 1
[    1.983480] EISA: Detected 0 cards.
[    1.983555] cpuidle: using governor ladder
[    1.983631] cpuidle: using governor menu
[    1.984319] TCP cubic registered
[    1.984422] Using IPI No-Shortcut mode
[    1.984656] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    1.984749] registered taskstats version 1
[    1.984910]   Magic number: 0:100:179
[    1.985011] tty ttyr5: hash matches
[    1.985131] acpi device:0f: hash matches
[    1.985243] rtc_cmos 00:03: setting system clock to 2008-11-01 13:09:40 UTC (1225544980)
[    1.985333] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.985409] EDD information not available.
[    1.985707] Freeing unused kernel memory: 424k freed
[    1.985825] Write protecting the kernel text: 2576k
[    1.985928] Write protecting the kernel read-only data: 936k
[    2.140988] fuse init (API version 7.9)
[    2.173580] ACPI: SSDT 7FE6E576, 0202 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[    2.174363] ACPI: SSDT 7FE6DF0C, 05E5 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[    2.289142] Monitor-Mwait will be used to enter C-1 state
[    2.289146] Monitor-Mwait will be used to enter C-2 state
[    2.289150] Monitor-Mwait will be used to enter C-3 state
[    2.289374] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.289729] processor ACPI0007:00: registered as cooling_device0
[    2.289798] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.290362] ACPI: SSDT 7FE6E778, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
[    2.290954] ACPI: SSDT 7FE6E4F1, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
[    2.291893] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    2.292482] processor ACPI0007:01: registered as cooling_device1
[    2.292600] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.300031] thermal LNXTHERM:01: registered as thermal_zone0
[    2.304531] ACPI: Thermal Zone [THM] (44 C)
[    2.313012] Marking TSC unstable due to TSC halts in idle
[    2.454638] usbcore: registered new interface driver usbfs
[    2.454780] usbcore: registered new interface driver hub
[    2.462942] usbcore: registered new device driver usb
[    2.466276] USB Universal Host Controller Interface driver v3.0
[    2.466389] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.466464] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.466468] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.466576] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.466704] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    2.466934] usb usb1: configuration #1 chosen from 1 choice
[    2.467039] hub 1-0:1.0: USB hub found
[    2.467119] hub 1-0:1.0: 2 ports detected
[    2.569276] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.569399] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.569407] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.569561] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    2.569757] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    2.570000] usb usb2: configuration #1 chosen from 1 choice
[    2.570158] hub 2-0:1.0: USB hub found
[    2.570289] hub 2-0:1.0: 2 ports detected
[    2.673318] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.673464] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.673471] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.673627] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    2.673818] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    2.674064] usb usb3: configuration #1 chosen from 1 choice
[    2.674221] hub 3-0:1.0: USB hub found
[    2.674352] hub 3-0:1.0: 2 ports detected
[    2.777307] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.777452] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.777460] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.777619] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    2.777810] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    2.778050] usb usb4: configuration #1 chosen from 1 choice
[    2.778210] hub 4-0:1.0: USB hub found
[    2.778343] hub 4-0:1.0: 2 ports detected
[    2.809357] No dock devices found.
[    2.840937] SCSI subsystem initialized
[    2.872433] libata version 3.00 loaded.
[    2.985320] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    2.985467] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.985474] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.985628] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    2.985826] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    2.986071] usb usb5: configuration #1 chosen from 1 choice
[    2.986229] hub 5-0:1.0: USB hub found
[    2.986362] hub 5-0:1.0: 2 ports detected
[    3.089385] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.089538] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.089546] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.089709] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    3.093779] ehci_hcd 0000:00:1a.7: debug port 1
[    3.093917] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    3.093925] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    3.098172] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    3.109032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.109294] usb usb6: configuration #1 chosen from 1 choice
[    3.109452] hub 6-0:1.0: USB hub found
[    3.109585] hub 6-0:1.0: 4 ports detected
[    3.214834] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.214982] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.214990] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.215149] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    3.219234] ehci_hcd 0000:00:1d.7: debug port 1
[    3.219373] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.219382] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    3.233030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.233295] usb usb7: configuration #1 chosen from 1 choice
[    3.233453] hub 7-0:1.0: USB hub found
[    3.233586] hub 7-0:1.0: 6 ports detected
[    3.441545] tg3.c:v3.94 (August 14, 2008)
[    3.441707] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.441856] tg3 0000:09:00.0: setting latency timer to 64
[    3.637054] usb 4-1: device not accepting address 2, error -71
[    3.693098] hub 4-0:1.0: unable to enumerate USB device on port 1
[    3.714422] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1e:c9:00:9e:61
[    3.714571] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
[    3.714713] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    3.714900] ohci1394 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.765809] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[f9aff800-f9afffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    3.771570] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.771752] pata_acpi 0000:00:1f.1: setting latency timer to 64
[    3.771775] pata_acpi 0000:00:1f.1: PCI INT A disabled
[    3.771926] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.772089] pata_acpi 0000:00:1f.2: setting latency timer to 64
[    3.772109] pata_acpi 0000:00:1f.2: PCI INT B disabled
[    3.777067] ata_piix 0000:00:1f.1: version 2.12
[    3.777078] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.777252] ata_piix 0000:00:1f.1: setting latency timer to 64
[    3.777645] scsi0 : ata_piix
[    3.777845] scsi1 : ata_piix
[    3.778831] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    3.778910] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    3.957952] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D300, max UDMA/33
[    3.989891] ata1.00: configured for UDMA/33
[    3.990093] ata2: port disabled. ignoring.
[    3.993589] scsi 0:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D300 PQ: 0 ANSI: 5
[    3.993831] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.993967] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    4.113057] usb 4-1: new low speed USB device using uhci_hcd and address 4
[    4.149094] ata_piix 0000:00:1f.2: setting latency timer to 64
[    4.149184] scsi2 : ata_piix
[    4.149661] scsi3 : ata_piix
[    4.150986] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
[    4.151126] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
[    4.282945] usb 4-1: configuration #1 chosen from 1 choice
[    4.305430] usbcore: registered new interface driver hiddev
[    4.320362] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/input/input2
[    4.581187] input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
[    4.581774] usbcore: registered new interface driver usbhid
[    4.581904] usbhid: v2.6:USB HID core driver
[    4.681220] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.041823] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[314fc00024d3a85c]
[    5.097393] ata3.00: ATA-8: TOSHIBA MK1246GSX, LB212D, max UDMA/100
[    5.097524] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    5.106021] ata3.00: configured for UDMA/100
[    5.425212] ata4: SATA link down (SStatus 0 SControl 0)
[    5.425487] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1246GS LB21 PQ: 0 ANSI: 5
[    5.441370] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[    5.441495] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[    5.470730] Driver 'sd' needs updating - please use bus_type methods
[    5.470989] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    5.471146] sd 2:0:0:0: [sda] Write Protect is off
[    5.471273] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.471321] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.471561] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    5.471716] sd 2:0:0:0: [sda] Write Protect is off
[    5.471845] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.471893] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.472038]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    5.496137] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    5.496271] Uniform CD-ROM driver Revision: 3.20
[    5.496491] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    5.547880]  sda1 sda2 < sda5 >
[    5.578326] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.828938] PM: Starting manual resume from disk
[    5.829087] PM: Resume from partition 8:5
[    5.829089] PM: Checking hibernation image.
[    5.829353] PM: Resume from disk failed.
[    5.904297] kjournald starting.  Commit interval 5 seconds
[    5.904437] EXT3-fs: mounted filesystem with ordered data mode.
[   17.357686] udevd version 124 started
[   17.973320] Linux agpgart interface v0.103
[   18.028335] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.106270] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.181557] iTCO_vendor_support: vendor-support=0
[   18.363394] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   18.364044] ACPI: Lid Switch [LID]
[   18.364104] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   18.388042] ACPI: Power Button (CM) [PBTN]
[   18.388137] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[   18.424028] ACPI: Sleep Button (CM) [SBTN]
[   18.468498] ACPI: AC Adapter [AC] (on-line)
[   18.509642] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   18.509742] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   18.509845] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   18.573362] ACPI: WMI: Mapper loaded
[   18.682785] ACPI: Battery Slot [BAT0] (battery present)
[   18.833745] sdhci: Secure Digital Host Controller Interface driver
[   18.833750] sdhci: Copyright(c) Pierre Ossman
[   18.857367] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[   18.857394] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[   18.860483] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[   19.088531] acpi device:32: registered as cooling_device2
[   19.093111] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/device:2f/input/input6
[   19.128033] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   19.139248] acpi device:37: registered as cooling_device3
[   19.139948] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/input/input7
[   19.160027] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   19.160270] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:39/input/input8
[   19.200042] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[   19.923696] nvidia: module license 'NVIDIA' taints kernel.
[   20.379255] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   20.379346] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.379357] nvidia 0000:01:00.0: setting latency timer to 64
[   20.379510] NVRM: loading NVIDIA UNIX x86 Kernel Module  177.80  Wed Oct  1 14:38:10 PDT 2008
[   20.454615] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   20.695561] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[   20.695567] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[   20.695700] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   20.695716] iwl3945 0000:0c:00.0: setting latency timer to 64
[   20.695738] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[   20.788101] iwl3945: Tunable channels: 13 802.11bg, 4 802.11a channels
[   20.797379] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   20.889963] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10
[   20.977140] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11
[   21.047378] iwl3945 0000:0c:00.0: PCI INT A disabled
[   21.074430] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   21.074456] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   21.533238] udev: renamed network interface wlan0 to eth1
[   22.214375] lp: driver loaded but no devices found
[   22.301681] i8k: unable to get SMM BIOS version
[   22.301691] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[   22.698449] Adding 4803392k swap on /dev/sda5.  Priority:-1 extents:1 across:4803392k
[   23.285728] EXT3 FS on sda1, internal journal
[   24.695872] type=1505 audit(1225545003.690:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4388
[   24.889419] type=1505 audit(1225545003.886:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4393
[   24.889621] type=1505 audit(1225545003.886:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4393
[   24.957308] type=1505 audit(1225545003.954:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4397
[   25.129758] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.639364] PPP generic driver version 2.4.2
[   25.654721] NET: Registered protocol family 17
[   25.737407] NET: Registered protocol family 10
[   25.738006] lo: Disabled Privacy Extensions
[   25.738658] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.858310] tg3: eth0: Link is up at 100 Mbps, full duplex.
[   26.858314] tg3: eth0: Flow control is off for TX and off for RX.
[   26.858523] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   31.080305] NET: Registered protocol family 24
[   31.786821] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   35.616615] apm: BIOS not found.
[   36.014024] ppdev: user-space parallel port driver
[   37.064011] eth0: no IPv6 routers present
[   41.153388] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   41.153397] vboxdrv: Successfully done.
[   41.153400] vboxdrv: Found 2 processor cores.
[   41.153519] vboxdrv: fAsync=0 offMin=0x1a4 offMax=0x1eaa
[   41.153526] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   41.153528] vboxdrv: Successfully loaded version 2.0.4_OSE (interface 0x00090000).
[   47.765476] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   47.765697] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[   47.769820] firmware: requesting iwlwifi-3945-1.ucode
[   47.858809] iwl3945: Radio disabled by HW RF Kill switch
[   47.858926] iwl3945 0000:0c:00.0: PCI INT A disabled
[   47.874925] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   47.875146] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[   47.875535] iwl3945: Radio disabled by HW RF Kill switch
[   47.875630] iwl3945 0000:0c:00.0: PCI INT A disabled
[   54.500066] Clocksource tsc unstable (delta = -206160010 ns)
[   94.190294] CPU0 attaching NULL sched-domain.
[   94.190316] CPU1 attaching NULL sched-domain.
[   94.208784] CPU0 attaching sched-domain:
[   94.208797]  domain 0: span 0-1 level MC
[   94.208802]   groups: 0 1
[   94.208814] CPU1 attaching sched-domain:
[   94.208818]  domain 0: span 0-1 level MC
[   94.208823]   groups: 1 0
[  162.280751] type=1503 audit(1225545141.275:6): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=7000 profile="/usr/sbin/cupsd"
[  162.321644] type=1503 audit(1225545141.319:7): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=7002 profile="/usr/sbin/cupsd"
[  162.346543] type=1503 audit(1225545141.343:8): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=7003 profile="/usr/sbin/cupsd"
[  162.357122] type=1503 audit(1225545141.355:9): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/7003/net/" pid=7003 profile="/usr/sbin/cupsd"
[  162.357174] type=1503 audit(1225545141.355:10): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=7003 profile="/usr/sbin/cupsd"
[  162.357187] type=1503 audit(1225545141.355:11): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=7003 profile="/usr/sbin/cupsd"
[  162.357199] type=1503 audit(1225545141.355:12): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=7003 profile="/usr/sbin/cupsd"
[  162.357212] type=1503 audit(1225545141.355:13): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=7003 profile="/usr/sbin/cupsd"
[  162.357224] type=1503 audit(1225545141.355:14): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=7003 profile="/usr/sbin/cupsd"
[  162.357236] type=1503 audit(1225545141.355:15): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=7003 profile="/usr/sbin/cupsd"
[ 2174.821042] usb 7-1: new high speed USB device using ehci_hcd and address 3
[ 2175.044480] usb 7-1: configuration #1 chosen from 1 choice
[ 2175.212363] Linux video capture interface: v2.00
[ 2175.239543] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:332d)
[ 2175.241378] input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1:1.0/input/input12
[ 2175.260177] usbcore: registered new interface driver uvcvideo
[ 2175.260185] USB Video Class driver (v0.1.0)
[ 3190.584145] CE: hpet increasing min_delta_ns to 15000 nsec
[ 3316.580169] __ratelimit: 9 callbacks suppressed
[ 3316.580179] firefox[9345]: segfault at b79a4a9e ip b7ce6571 sp bfe8dd04 error 4 in libc-2.8.90.so[b7cb8000+158000]
[ 3337.312096] CE: hpet increasing min_delta_ns to 22500 nsec
[ 3484.071331] firefox[9462]: segfault at b791fa9e ip b7c61571 sp bf908f64 error 4 in libc-2.8.90.so[b7c33000+158000]
[ 4885.825136] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x01ef000a


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 1 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译