[求助]启动时在硬盘检测完后挂起

启动讨论 grub/grub2/syslinux/grub4dos/Lilo
回复
南燕
帖子: 81
注册时间: 2005-09-11 22:32
送出感谢: 0
接收感谢: 0

[求助]启动时在硬盘检测完后挂起

#1

帖子 南燕 » 2008-11-05 12:41

安装完8.04后,重新启动后,自检硬盘和刻录机都检查出来后,就不往下一步走了,或者有时候 startup后,看到启动的进度条,等进度条跑完后,就黑屏,两种情况就挂在那里不动了

冷启动后按ESC调出菜单,选择正常模式启动,就好了,很是奇怪
头像
TeliuTe
论坛版主
帖子: 7406
注册时间: 2007-11-25 13:29
系统: 14/16/18/Fedroa22/w7
来自: 新疆博乐
送出感谢: 29 次
接收感谢: 97 次
联系:

Re: [求助]启动时在硬盘检测完后挂起

#2

帖子 TeliuTe » 2008-11-05 18:17

挺奇怪的,说一下系统的情况,机子的配置情况,menu.lst是什么样的

正常启动后点“系统-系统管理-系统日志”里看看有没有异常的
南燕
帖子: 81
注册时间: 2005-09-11 22:32
送出感谢: 0
接收感谢: 0

Re: [求助]启动时在硬盘检测完后挂起

#3

帖子 南燕 » 2008-11-05 20:25

TeliuTe 写了:挺奇怪的,说一下系统的情况,机子的配置情况,menu.lst是什么样的

正常启动后点“系统-系统管理-系统日志”里看看有没有异常的
menu.lst

代码: 全选

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=5fe2f891-5cb3-4244-bb2c-08540a0241b2 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=zh_CN

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 8.04.1, kernel 2.6.24-21-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.24-21-generic root=UUID=5fe2f891-5cb3-4244-bb2c-08540a0241b2 ro quiet splash locale=zh_CN
initrd		/boot/initrd.img-2.6.24-21-generic
quiet

title		Ubuntu 8.04.1, kernel 2.6.24-21-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.24-21-generic root=UUID=5fe2f891-5cb3-4244-bb2c-08540a0241b2 ro single
initrd		/boot/initrd.img-2.6.24-21-generic

title		Ubuntu 8.04.1, kernel 2.6.24-16-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.24-16-generic root=UUID=5fe2f891-5cb3-4244-bb2c-08540a0241b2 ro quiet splash locale=zh_CN
initrd		/boot/initrd.img-2.6.24-16-generic
quiet

title		Ubuntu 8.04.1, kernel 2.6.24-16-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.24-16-generic root=UUID=5fe2f891-5cb3-4244-bb2c-08540a0241b2 ro single
initrd		/boot/initrd.img-2.6.24-16-generic

title		Ubuntu 8.04.1, memtest86+
root		(hd0,0)
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST
系统日志里看什么内容呢?
头像
TeliuTe
论坛版主
帖子: 7406
注册时间: 2007-11-25 13:29
系统: 14/16/18/Fedroa22/w7
来自: 新疆博乐
送出感谢: 29 次
接收感谢: 97 次
联系:

Re: [求助]启动时在硬盘检测完后挂起

#4

帖子 TeliuTe » 2008-11-06 12:33

menu.lst里看到只有Ubuntu一个操作系统,应该没有其他的干扰

系统日志里看一下没有正常启动的时间里,系统是否记下了什么情况,

到菜单“系统-系统管理-硬件驱动”里看看是否有驱动的问题
回复

回到 “启动和引导”