Ubuntu中文论坛

原机装的是XP 后装的是8.04 用Fdisk/mbr 把gubr 去掉

在 xp 下 加入 grldr 改boot 重启 启动ubuntu成功 (因为我的grub总是莫名其妙坏掉 不得不改xp引导)


后来我升级 8.10 同样的做法 却发现 没有启动成功 提示找不到menu.lst

不过我事先复制了menu.lst 进入XP后在c盘建立 menu.lst 重启 还是不成功 提示忘记了

现在 我该怎么办

在线等

后来 我用某人的方法 改C盘menu.lst 成

title ubuntu
root (hd0,3)
chainloader +1


还是不成功

把你的硬盘分区的情况写清楚，貌似是menu.lst的问题。再说你的这个：
title ubuntu
root (hd0,3)
chainloader +1
它是启动不了Ubuntu的，chainloader命令是装载NT内核的，启动xp。建议你学习下grub的命令，网上很多的。

- -汗 硬盘分5区 c是XP ubuntu在最后一个区 hd0,3

我用什么工具 可以得到你想要的信息 拜托了

等!

你用pq或pm都可以看见的，你的Ubuntu是用什么安装的wubi还是光盘？

硬盘完全安装

恩，那你把你原始的menu.lst 发上来，我帮你改下试试。

拷贝的么??

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=92cd77fd-e7e7-4ffe-aac1-f025337de1fa ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=92cd77fd-e7e7-4ffe-aac1-f025337de1fa

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid 92cd77fd-e7e7-4ffe-aac1-f025337de1fa
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=92cd77fd-e7e7-4ffe-aac1-f025337de1fa ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid 92cd77fd-e7e7-4ffe-aac1-f025337de1fa
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=92cd77fd-e7e7-4ffe-aac1-f025337de1fa ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Ubuntu 8.10, memtest86+
uuid 92cd77fd-e7e7-4ffe-aac1-f025337de1fa
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1

谢谢 麻烦你了

你把附件下来解压吧menu.lst 放到C盘根目录下，试试不一定成功。