每次启动屏幕都会黑很久
-
- 帖子: 91
- 注册时间: 2008-02-21 17:20
- 来自: GZ
每次启动屏幕都会黑很久
每次启动屏幕都会黑很久要等很久才会出现UBUNTU的splash screen 而且一闪就过,我装过FEDORA14和OPENSUSE 都是一开机后就有SPLASH SREEN了 找了很就没发现解决办法 请问有那位朋友知道如何解决吗?
Let's ubuntu
-
- 帖子: 30
- 注册时间: 2010-10-19 22:32
Re: 每次启动屏幕都会黑很久
我的也有这样的问题。求高手解答
-
- 帖子: 91
- 注册时间: 2008-02-21 17:20
- 来自: GZ
-
- 帖子: 11
- 注册时间: 2010-01-25 22:04
Re: 每次启动屏幕都会黑很久
顶 起来!我也是这个问题!!!!!一直没解决
-
- 帖子: 92
- 注册时间: 2005-12-18 13:21
Re: 每次启动屏幕都会黑很久
我的情况是不安装显卡驱动的话好好的,一装上就是非常模糊的闪过,杯具。求解。
-
- 帖子: 1
- 注册时间: 2010-12-14 9:38
Re: 每次启动屏幕都会黑很久
我也遇到同样的问题。我的笔记本宏基4741G,先装win7,再U盘装ubuntu。开机后总是黑屏2分钟左右,也没有windows启动选项,而且不能用光盘装windows了。怀疑是主板出问题了,如果真是这样真后悔装ubuntu了,谁能帮忙解决这个问题十分感谢。
- eexpress
- 帖子: 58428
- 注册时间: 2005-08-14 21:55
- 来自: 长沙
Re: 每次启动屏幕都会黑很久
黑屏2分钟左右。改过grub2的分辨率什么的?还是新安装。
启动这部分,都是grub的设置和framebuffer的驱动相关。和硬件关系密切。自己搜索这方面的帖子。
启动这部分,都是grub的设置和framebuffer的驱动相关。和硬件关系密切。自己搜索这方面的帖子。
● 鸣学
-
- 帖子: 992
- 注册时间: 2007-12-05 10:57
- 系统: ubuntu14.04
- 来自: 金山
Re: 每次启动屏幕都会黑很久
按照如下的方法设置试试看
http://hi.baidu.com/dongfengxiao/blog/i ... 80798.html
1安装所需的包:
sudo apt-get install v86d hwinfo
2查看framebuffer
sudo hwinfo --framebuffer
屏幕输出的是你的显示器支持的分辨率
3修改grub文件
sudo gedit /etc/default/grub
修改以下红字的那行,别的不管,1280x800-24换成你喜欢的,并且在上面的查看看结果中有的分辨率。
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x800-24,mtrr=3,scroll=ywrap"
GRUB_CMDLINE_LINUX=""
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=1280x800
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
4修改initramfs:
sudo gedit /etc/initramfs-tools/modules
# List of modules that you want to include in your initramfs.
#
# Syntax: module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.
#
# Examples:
#
# raid1
# sd_mod
uvesafb mode_option=1280x800-24 mtrr=3 scroll=ywrap
加上上面红字一行,分辨率改为和前面的一样
5强制使用Framebuffer:
echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash
6更新grub和initramfs:
sudo update-grub2
sudo update-initramfs -u
7重启
http://hi.baidu.com/dongfengxiao/blog/i ... 80798.html
1安装所需的包:
sudo apt-get install v86d hwinfo
2查看framebuffer
sudo hwinfo --framebuffer
屏幕输出的是你的显示器支持的分辨率
3修改grub文件
sudo gedit /etc/default/grub
修改以下红字的那行,别的不管,1280x800-24换成你喜欢的,并且在上面的查看看结果中有的分辨率。
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x800-24,mtrr=3,scroll=ywrap"
GRUB_CMDLINE_LINUX=""
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=1280x800
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
4修改initramfs:
sudo gedit /etc/initramfs-tools/modules
# List of modules that you want to include in your initramfs.
#
# Syntax: module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.
#
# Examples:
#
# raid1
# sd_mod
uvesafb mode_option=1280x800-24 mtrr=3 scroll=ywrap
加上上面红字一行,分辨率改为和前面的一样
5强制使用Framebuffer:
echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash
6更新grub和initramfs:
sudo update-grub2
sudo update-initramfs -u
7重启
-
- 帖子: 98
- 注册时间: 2010-03-22 12:46
- 联系:
Re: 每次启动屏幕都会黑很久
我的也是如此,狂读硬盘很长时间同时黑脸,出来splash screen就很快了,不知道何解。
-
- 帖子: 34
- 注册时间: 2009-07-22 11:10
Re: 每次启动屏幕都会黑很久
我也是,开机 grub 没显示,就是长时间黑屏,然后 splash screen 出来就快了。
真不懂这段黑屏的时间里系统要做了什么。
.
真不懂这段黑屏的时间里系统要做了什么。
.
-
- 帖子: 308
- 注册时间: 2006-07-06 18:25
Re: 每次启动屏幕都会黑很久
不懂这段黑屏的时间里系统要做了什么
-
- 帖子: 62
- 注册时间: 2009-10-09 13:03
Re: 每次启动屏幕都会黑很久
马克一个先
一直休眠
发现自己的splash不知道什么时候被搞成字符了
一直休眠
发现自己的splash不知道什么时候被搞成字符了