升级到13.04后启动很慢

启动讨论 grub/grub2/syslinux/grub4dos/Lilo
回复
liberize
帖子: 41
注册时间: 2013-03-10 13:29
系统: Ubuntu 12.10

升级到13.04后启动很慢

#1

帖子 liberize » 2013-04-27 10:19

RT,刚升级到了13.04,发现启动速度比以前慢了很多,附上dmesg信息以及bootchart图表,谁能帮我看看是什么情况?

代码: 全选

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=94c74908-24b0-4734-ac00-75fba85b64c6 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf680fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf681000-0x00000000bf6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf74cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf74d000-0x00000000bf7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7e2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf7e3000-0x00000000bf7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Acer Aspire 4738G/JE41_CP, BIOS V1.16 05/27/2011
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask FC0000000 write-back
[    0.000000]   6 base 23C000000 mask FFC000000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0xbf7fffff]
[    0.000000]  [mem 0x00000000-0xbf7fffff] page 2M
[    0.000000] kernel direct mapping tables up to 0xbf7fffff @ [mem 0x1fffc000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[    0.000000]  [mem 0x100000000-0x1fbffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x1fbffffff @ [mem 0xbf7de000-0xbf7e2fff]
[    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[    0.000000]  [mem 0x200000000-0x23bffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x23bffffff @ [mem 0x1fbffe000-0x1fbffffff]
[    0.000000] RAMDISK: [mem 0x346f6000-0x36372fff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 00000000bf7fe120 00074 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 00000000bf7ed000 0B073 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 00000000bf75f000 00040
[    0.000000] ACPI: ASF! 00000000bf7fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 00000000bf7fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 00000000bf7ec000 00176 (v01 ACRSYS ACRPRDCT 06040000 1025 01000013)
[    0.000000] ACPI: BOOT 00000000bf7e9000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASPT 00000000bf7e5000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: WDAT 00000000bf7e4000 00224 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 00000000bf7e3000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23bffffff]
[    0.000000]   NODE_DATA [mem 0x23bffb000-0x23bffffff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23bffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xbf680fff]
[    0.000000]   node   0: [mem 0xbf6bf000-0xbf74cfff]
[    0.000000]   node   0: [mem 0xbf7bf000-0xbf7e2fff]
[    0.000000]   node   0: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1fbffffff]
[    0.000000]   node   0: [mem 0x200000000-0x23bffffff]
[    0.000000] On node 0 totalpages: 2062017
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3911 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12189 pages used for memmap
[    0.000000]   DMA32 zone: 767895 pages, LIFO batch:31
[    0.000000]   Normal zone: 20224 pages used for memmap
[    0.000000]   Normal zone: 1257728 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf681000 - 00000000bf6bf000
[    0.000000] PM: Registered nosave memory: 00000000bf74d000 - 00000000bf7bf000
[    0.000000] PM: Registered nosave memory: 00000000bf7e3000 - 00000000bf7ff000
[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[    0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
[    0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023bc00000 s85056 r8192 d21440 u262144
[    0.000000] pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2029534
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=94c74908-24b0-4734-ac00-75fba85b64c6 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8005028k/9371648k available (7006k kernel code, 1123580k absent, 243040k reserved, 6238k data, 992k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2660.006 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.01 BogoMIPS (lpj=10640024)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000029] Security Framework initialized
[    0.000042] AppArmor: AppArmor initialized
[    0.000043] Yama: becoming mindful.
[    0.000525] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002319] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003115] Mount-cache hash table entries: 256
[    0.003288] Initializing cgroup subsys cpuacct
[    0.003290] Initializing cgroup subsys memory
[    0.003296] Initializing cgroup subsys devices
[    0.003298] Initializing cgroup subsys freezer
[    0.003299] Initializing cgroup subsys blkio
[    0.003301] Initializing cgroup subsys perf_event
[    0.003303] Initializing cgroup subsys hugetlb
[    0.003324] CPU: Physical Processor ID: 0
[    0.003326] CPU: Processor Core ID: 0
[    0.003331] mce: CPU supports 9 MCE banks
[    0.003341] CPU0: Thermal monitoring enabled (TM1)
[    0.003348] process: using mwait in idle threads
[    0.003352] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.003352] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.003352] tlb_flushall_shift: 6
[    0.003479] Freeing SMP alternatives: 24k freed
[    0.005446] ACPI: Core revision 20121018
[    0.036631] ftrace: allocating 26689 entries in 105 pages
[    0.049308] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088896] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 480  @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[    0.195286] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.195292] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.195294] ... version:                3
[    0.195295] ... bit width:              48
[    0.195295] ... generic registers:      4
[    0.195296] ... value mask:             0000ffffffffffff
[    0.195297] ... max period:             000000007fffffff
[    0.195298] ... fixed-purpose events:   3
[    0.195299] ... event mask:             000000070000000f
[    0.209400] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.196177] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.235832] Brought up 4 CPUs
[    0.235837] smpboot: Total of 4 processors activated (21280.04 BogoMIPS)
[    0.238352] devtmpfs: initialized
[    0.239412] EVM: security.selinux
[    0.239413] EVM: security.SMACK64
[    0.239414] EVM: security.capability
[    0.239456] PM: Registering ACPI NVS region [mem 0xbf74d000-0xbf7befff] (466944 bytes)
[    0.240239] regulator-dummy: no parameters
[    0.240281] NET: Registered protocol family 16
[    0.240407] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.240409] ACPI: bus type pci registered
[    0.240473] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.240475] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.249822] PCI: Using configuration type 1 for base access
[    0.249969] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.249971] mtrr: probably your BIOS does not setup all CPUs.
[    0.249971] mtrr: corrected configuration.
[    0.250561] bio: create slab <bio-0> at 0
[    0.250636] ACPI: Added _OSI(Module Device)
[    0.250637] ACPI: Added _OSI(Processor Device)
[    0.250639] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.250640] ACPI: Added _OSI(Processor Aggregator Device)
[    0.252171] ACPI: EC: Look up EC in DSDT
[    0.256030] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.256477] ACPI: SSDT 00000000bf691a18 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.256839] ACPI: Dynamic OEM Table Load:
[    0.256841] ACPI: SSDT           (null) 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.256978] ACPI: SSDT 00000000bf68f018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.257326] ACPI: Dynamic OEM Table Load:
[    0.257328] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.257569] ACPI: SSDT 00000000bf690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.257963] ACPI: Dynamic OEM Table Load:
[    0.257965] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.258088] ACPI: SSDT 00000000bf68ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.258459] ACPI: Dynamic OEM Table Load:
[    0.258461] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.258999] ACPI: Interpreter enabled
[    0.259002] ACPI: (supports S0 S3 S4 S5)
[    0.259025] ACPI: Using IOAPIC for interrupt routing
[    0.261957] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.262056] ACPI: No dock devices found.
[    0.262060] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.262311] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.262313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.262430] \_SB_.PCI0:_OSC invalid UUID
[    0.262431] _OSC request data:1 8 1f 
[    0.262882] PCI host bridge to bus 0000:00
[    0.262886] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.262887] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.262889] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.262890] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.262892] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[    0.262900] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.262916] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.262936] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    0.262965] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.263011] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.263040] pci 0000:00:16.0: reg 10: [mem 0xd4106100-0xd410610f 64bit]
[    0.263139] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.263181] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.263575] pci 0000:00:1a.0: reg 10: [mem 0xd4105c00-0xd4105fff]
[    0.265824] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.265857] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.265878] pci 0000:00:1b.0: reg 10: [mem 0xd4100000-0xd4103fff 64bit]
[    0.265973] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.266003] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.266101] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.266136] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.266231] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.266268] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.266651] pci 0000:00:1d.0: reg 10: [mem 0xd4105800-0xd4105bff]
[    0.268906] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.268935] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.269017] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    0.269145] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    0.269171] pci 0000:00:1f.2: reg 10: [io  0x4048-0x404f]
[    0.269181] pci 0000:00:1f.2: reg 14: [io  0x4054-0x4057]
[    0.269192] pci 0000:00:1f.2: reg 18: [io  0x4040-0x4047]
[    0.269203] pci 0000:00:1f.2: reg 1c: [io  0x4050-0x4053]
[    0.269213] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    0.269224] pci 0000:00:1f.2: reg 24: [mem 0xd4105000-0xd41057ff]
[    0.269289] pci 0000:00:1f.2: PME# supported from D3hot
[    0.269313] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.269334] pci 0000:00:1f.3: reg 10: [mem 0xd4106000-0xd41060ff 64bit]
[    0.269363] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.269410] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.269437] pci 0000:00:1f.6: reg 10: [mem 0xd4104000-0xd4104fff 64bit]
[    0.269561] pci 0000:01:00.0: [1002:68e4] type 00 class 0x030000
[    0.269574] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.269584] pci 0000:01:00.0: reg 18: [mem 0xd4000000-0xd401ffff 64bit]
[    0.269590] pci 0000:01:00.0: reg 20: [io  0x3000-0x30ff]
[    0.269602] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.269628] pci 0000:01:00.0: supports D1 D2
[    0.269645] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[    0.269657] pci 0000:01:00.1: reg 10: [mem 0xd4020000-0xd4023fff 64bit]
[    0.269707] pci 0000:01:00.1: supports D1 D2
[    0.269736] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.269738] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.269740] pci 0000:00:01.0:   bridge window [mem 0xd4000000-0xd40fffff]
[    0.269743] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.269854] pci 0000:02:00.0: [14e4:1692] type 00 class 0x020000
[    0.269883] pci 0000:02:00.0: reg 10: [mem 0xd3000000-0xd300ffff 64bit]
[    0.270043] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.275138] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.275146] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.275153] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff]
[    0.275163] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.275251] pci 0000:03:00.0: [168c:002e] type 00 class 0x028000
[    0.275272] pci 0000:03:00.0: reg 10: [mem 0xd2000000-0xd200ffff 64bit]
[    0.275377] pci 0000:03:00.0: supports D1
[    0.275378] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.283083] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.283090] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    0.283097] pci 0000:00:1c.5:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.283108] pci 0000:00:1c.5:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.283208] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.283220] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.283222] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.283224] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.283225] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[    0.283256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.283301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.283345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.283420] \_SB_.PCI0:_OSC invalid UUID
[    0.283421] _OSC request data:1 1f 1f 
[    0.283423]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.283425]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.283957] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[    0.284001] PCI host bridge to bus 0000:7f
[    0.284003] pci_bus 0000:7f: root bus resource [bus 7f]
[    0.284008] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[    0.284024] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[    0.284042] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[    0.284057] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[    0.284072] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[    0.284087] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[    0.284113]  pci0000:7f: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.284115]  pci0000:7f: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.284232] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.284267] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.284300] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.284333] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.284366] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.284399] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.284432] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.284465] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.284554] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.284557] vgaarb: loaded
[    0.284558] vgaarb: bridge control possible 0000:01:00.0
[    0.284692] SCSI subsystem initialized
[    0.284694] ACPI: bus type scsi registered
[    0.284739] libata version 3.00 loaded.
[    0.284753] ACPI: bus type usb registered
[    0.284766] usbcore: registered new interface driver usbfs
[    0.284773] usbcore: registered new interface driver hub
[    0.284792] usbcore: registered new device driver usb
[    0.284859] PCI: Using ACPI for IRQ routing
[    0.289656] PCI: pci_cache_line_size set to 64 bytes
[    0.289745] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.289747] e820: reserve RAM buffer [mem 0xbf681000-0xbfffffff]
[    0.289748] e820: reserve RAM buffer [mem 0xbf74d000-0xbfffffff]
[    0.289749] e820: reserve RAM buffer [mem 0xbf7e3000-0xbfffffff]
[    0.289750] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.289826] NetLabel: Initializing
[    0.289827] NetLabel:  domain hash size = 128
[    0.289828] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.289837] NetLabel:  unlabeled traffic allowed by default
[    0.289896] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.289900] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.291911] Switching to clocksource hpet
[    0.296387] AppArmor: AppArmor Filesystem Enabled
[    0.296418] pnp: PnP ACPI init
[    0.296434] ACPI: bus type pnp registered
[    0.296527] pnp 00:00: [dma 4]
[    0.296549] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.296567] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.296667] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.296698] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.296716] pnp 00:04: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io  0x1000-0x1fff]
[    0.296744] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.296746] system 00:04: [io  0x0800-0x080f] has been reserved
[    0.296748] system 00:04: [io  0xffff] has been reserved
[    0.296749] system 00:04: [io  0xffff] has been reserved
[    0.296751] system 00:04: [io  0x0400-0x047f] has been reserved
[    0.296752] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.296755] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296777] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.296799] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.296819] pnp 00:07: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
[    0.297096] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.297098] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.297100] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.297101] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.297103] system 00:08: [mem 0xf0000000-0xf1ffffff] has been reserved
[    0.297105] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.297107] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.297108] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.297110] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.297112] system 00:08: [mem 0xd4200000-0xd4200fff] has been reserved
[    0.297114] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.297209] pnp: PnP ACPI: found 9 devices
[    0.297210] ACPI: ACPI bus type pnp unregistered
[    0.303753] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.303796] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4040000-0xd405ffff pref]
[    0.303799] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.303801] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.303804] pci 0000:00:01.0:   bridge window [mem 0xd4000000-0xd40fffff]
[    0.303807] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.303810] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.303813] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.303819] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff]
[    0.303823] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.303830] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.303833] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    0.303839] pci 0000:00:1c.5:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.303843] pci 0000:00:1c.5:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.303851] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.303904] pci 0000:00:1e.0: setting latency timer to 64
[    0.303909] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.303910] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.303912] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303913] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[    0.303915] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.303916] pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd40fffff]
[    0.303918] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.303920] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.303921] pci_bus 0000:02: resource 1 [mem 0xd3000000-0xd3ffffff]
[    0.303923] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.303924] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.303926] pci_bus 0000:03: resource 1 [mem 0xd2000000-0xd2ffffff]
[    0.303927] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.303929] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.303930] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.303932] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303933] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff]
[    0.303966] NET: Registered protocol family 2
[    0.304123] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.304364] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.304556] TCP: Hash tables configured (established 65536 bind 65536)
[    0.304590] TCP: reno registered
[    0.304606] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.304637] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.304725] NET: Registered protocol family 1
[    0.335875] pci 0000:01:00.0: Boot video device
[    0.335935] PCI: CLS 64 bytes, default 64
[    0.335985] Trying to unpack rootfs image as initramfs...
[    0.740028] Freeing initrd memory: 29172k freed
[    0.746411] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.746418] software IO TLB [mem 0xbb681000-0xbf681000] (64MB) mapped at [ffff8800bb681000-ffff8800bf680fff]
[    0.746461] Simple Boot Flag at 0x44 set to 0x1
[    0.746889] Initialise module verification
[    0.746928] audit: initializing netlink socket (disabled)
[    0.746941] type=2000 audit(1367057023.620:1): initialized
[    0.769847] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.771155] VFS: Disk quotas dquot_6.5.2
[    0.771190] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.771574] fuse init (API version 7.20)
[    0.771644] msgmni has been set to 15691
[    0.772135] Key type asymmetric registered
[    0.772138] Asymmetric key parser 'x509' registered
[    0.772165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.772192] io scheduler noop registered
[    0.772194] io scheduler deadline registered (default)
[    0.772199] io scheduler cfq registered
[    0.772302] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.772437] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.772448] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.772479] intel_idle: MWAIT substates: 0x1120
[    0.772480] intel_idle: v0.4 model 0x25
[    0.772481] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.169900] ACPI: AC Adapter [ACAD] (on-line)
[    1.170026] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
[    1.170030] ACPI: Power Button [PWRB]
[    1.170057] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input1
[    1.170077] ACPI: Lid Switch [LID0]
[    1.170102] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input2
[    1.170104] ACPI: Sleep Button [SLPB]
[    1.170128] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.170130] ACPI: Power Button [PWRF]
[    1.170189] ACPI: Requesting acpi_cpufreq
[    1.173607] thermal LNXTHERM:00: registered as thermal_zone0
[    1.173610] ACPI: Thermal Zone [THRM] (55 C)
[    1.173636] GHES: HEST is not enabled!
[    1.173789] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.174369] ACPI: Battery Slot [BAT1] (battery present)
[    1.175146] Linux agpgart interface v0.103
[    1.176179] brd: module loaded
[    1.176678] loop: module loaded
[    1.176908] libphy: Fixed MDIO Bus: probed
[    1.176948] tun: Universal TUN/TAP device driver, 1.6
[    1.176949] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.176983] PPP generic driver version 2.4.2
[    1.177031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.177033] ehci-pci: EHCI PCI platform driver
[    1.177071] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    1.177075] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.177080] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.177095] ehci-pci 0000:00:1a.0: debug port 2
[    1.181027] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.181051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4105c00
[    1.189702] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.189734] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.189738] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.189742] usb usb1: Product: EHCI Host Controller
[    1.189746] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[    1.189749] usb usb1: SerialNumber: 0000:00:1a.0
[    1.189886] hub 1-0:1.0: USB hub found
[    1.189892] hub 1-0:1.0: 3 ports detected
[    1.189987] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.189991] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.189994] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.190008] ehci-pci 0000:00:1d.0: debug port 2
[    1.193928] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.193946] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4105800
[    1.205659] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.205696] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.205700] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.205704] usb usb2: Product: EHCI Host Controller
[    1.205707] usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[    1.205710] usb usb2: SerialNumber: 0000:00:1d.0
[    1.205831] hub 2-0:1.0: USB hub found
[    1.205835] hub 2-0:1.0: 3 ports detected
[    1.205902] ehci-platform: EHCI generic platform driver
[    1.205907] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.205917] uhci_hcd: USB Universal Host Controller Interface driver
[    1.205961] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.212165] i8042: Detected active multiplexing controller, rev 1.1
[    1.216004] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.216010] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.216027] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.216040] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.216051] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.216161] mousedev: PS/2 mouse device common for all mice
[    1.216332] rtc_cmos 00:05: RTC can wake from S4
[    1.216454] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.216487] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.216552] device-mapper: uevent: version 1.0.3
[    1.216601] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
[    1.216648] cpuidle: using governor ladder
[    1.216705] cpuidle: using governor menu
[    1.216709] ledtrig-cpu: registered to indicate activity on CPUs
[    1.216710] EFI Variables Facility v0.08 2004-May-17
[    1.216883] ashmem: initialized
[    1.216996] TCP: cubic registered
[    1.217060] NET: Registered protocol family 10
[    1.217207] NET: Registered protocol family 17
[    1.217216] Key type dns_resolver registered
[    1.217510] Loading module verification certificates
[    1.219355] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d490763cc418e29de79f40a5aa7d97747ec8882c'
[    1.219382] registered taskstats version 1
[    1.221823] Key type trusted registered
[    1.223571] Key type encrypted registered
[    1.226154] rtc_cmos 00:05: setting system clock to 2013-04-27 10:03:44 UTC (1367057024)
[    1.227538] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.227540] EDD information not available.
[    1.228723] Freeing unused kernel memory: 992k freed
[    1.228891] Write protecting the kernel read-only data: 12288k
[    1.231523] Freeing unused kernel memory: 1176k freed
[    1.234011] Freeing unused kernel memory: 1080k freed
[    1.245260] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.255391] udevd[126]: starting version 175
[    1.283476] pps_core: LinuxPPS API ver. 1 registered
[    1.283480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    1.284778] PTP clock support registered
[    1.287458] Disabling lock debugging due to kernel taint
[    1.288216] ahci 0000:00:1f.2: version 3.0
[    1.288225] tg3.c:v3.128 (December 03, 2012)
[    1.288362] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.288443] ahci: SSS flag set, parallel bus scan disabled
[    1.288479] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.288482] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    1.288487] ahci 0000:00:1f.2: setting latency timer to 64
[    1.293871] scsi0 : ahci
[    1.293968] scsi1 : ahci
[    1.294049] scsi2 : ahci
[    1.294968] scsi3 : ahci
[    1.295064] ata1: SATA max UDMA/133 abar m2048@0xd4105000 port 0xd4105100 irq 41
[    1.295068] ata2: SATA max UDMA/133 abar m2048@0xd4105000 port 0xd4105180 irq 41
[    1.295070] ata3: DUMMY
[    1.295071] ata4: DUMMY
[    1.301990] acpi device:0b: registered as cooling_device4
[    1.302014] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.302060] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:01/input/input5
[    1.304144] libphy: tg3 mdio bus: probed
[    1.305067] wmi: Mapper loaded
[    1.312951] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 60:eb:69:e2:17:ea
[    1.312957] tg3 0000:02:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
[    1.312960] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.312962] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.500924] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.612737] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.617579] ata1.00: ATA-8: WDC WD5000BPVT-22HXZT1, 01.01A01, max UDMA/133
[    1.617585] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.622496] ata1.00: configured for UDMA/133
[    1.622651] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 01.0 PQ: 0 ANSI: 5
[    1.622775] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.622779] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.622803] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.622824] sd 0:0:0:0: [sda] Write Protect is off
[    1.622827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.622848] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.633090] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.633096] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.633488] hub 1-1:1.0: USB hub found
[    1.633629] hub 1-1:1.0: 6 ports detected
[    1.728222]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    1.729496] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.740361] tsc: Refined TSC clocksource calibration: 2659.999 MHz
[    1.740369] Switching to clocksource tsc
[    1.744410] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.876436] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.876441] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.876866] hub 2-1:1.0: USB hub found
[    1.877031] hub 2-1:1.0: 8 ports detected
[    1.939984] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.941611] ata2.00: ATAPI: MATSHITADVD-RAM UJ8A0AS, 1.00, max UDMA/100
[    1.944257] ata2.00: configured for UDMA/100
[    1.948170] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.948187] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8A0AS  1.00 PQ: 0 ANSI: 5
[    1.951310] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.951316] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.951517] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.951695] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.197967] usb 1-1.1: New USB device found, idVendor=04fc, idProduct=2801
[    2.197975] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.197979] usb 1-1.1: Product: 1.3M HD WebCam
[    2.197983] usb 1-1.1: Manufacturer: APB2B071X
[    2.438779] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[    2.536997] usb 1-1.2: New USB device found, idVendor=09da, idProduct=c20a
[    2.537004] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.537009] usb 1-1.2: Product: USB Mouse
[    2.537013] usb 1-1.2: Manufacturer: A4Tech
[    2.547959] usbcore: registered new interface driver usbhid
[    2.547966] usbhid: USB HID core driver
[    2.550536] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[    2.550914] hid-generic 0003:09DA:C20A.0001: input,hidraw0: USB HID v1.10 Keyboard [A4Tech USB Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.551051] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input7
[    2.551175] hid-generic 0003:09DA:C20A.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [A4Tech USB Mouse] on usb-0000:00:1a.0-1.2/input1
[    4.803526] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    4.803530] vesafb: scrolling: redraw
[    4.803531] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    4.805285] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90008f00000, using 4160k, total 4160k
[    4.805390] Console: switching to colour frame buffer device 170x48
[    4.807596] fb0: VESA VGA frame buffer device
[    4.971233] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[    4.971237] EXT4-fs (sda2): write access will be enabled during recovery
[    6.403767] EXT4-fs (sda2): orphan cleanup on readonly fs
[    6.403776] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 916338
[    6.403835] EXT4-fs (sda2): 1 orphan inode deleted
[    6.403837] EXT4-fs (sda2): recovery complete
[    6.480844] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    9.596739] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.863320] udevd[462]: starting version 175
[   11.224151] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   11.501344] lp: driver loaded but no devices found
[   12.487242] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[   12.501188] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[   12.501197] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.501202] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   12.501205] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.501207] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   12.501211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.501212] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   12.501215] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.501216] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.518121] acer_wmi: Acer Laptop ACPI-WMI Extras
[   12.518134] acer_wmi: Function bitmap for Communication Button: 0x1
[   12.518138] acer_wmi: Brightness must be controlled by acpi video driver
[   12.518761] input: Acer WMI hotkeys as /devices/virtual/input/input8
[   12.518963] input: Acer BMA150 accelerometer as /devices/virtual/input/input9
[   12.529713] mei 0000:00:16.0: setting latency timer to 64
[   12.529776] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[   12.548764] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[   12.548768] AMD IOMMUv2 functionality not available on this system
[   12.597936] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   12.598021] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[   12.598126] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   12.705567] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[   12.706950] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[   12.708050] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[   12.709313] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   12.937482] cfg80211: Calling CRDA to update world regulatory domain
[   13.242176] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   13.646925] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 554713
[   13.694414] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[   13.806790] cfg80211: World regulatory domain updated:
[   13.806794] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.806796] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.806797] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.806798] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.806800] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.806801] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.957733] Linux video capture interface: v2.00
[   14.052930] ath: phy0: ASPM enabled: 0x42
[   14.052935] ath: EEPROM regdomain: 0x65
[   14.052936] ath: EEPROM indicates we should expect a direct regpair map
[   14.052938] ath: Country alpha2 being used: 00
[   14.052939] ath: Regpair used: 0x65
[   14.199236] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   14.199526] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90009320000, irq=17
[   14.253013] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   14.253139] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   14.261309] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (04fc:2801)
[   14.267299] type=1400 audit(1367028237.570:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=888 comm="apparmor_parser"
[   14.267366] type=1400 audit(1367028237.570:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=889 comm="apparmor_parser"
[   14.267373] type=1400 audit(1367028237.570:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=959 comm="apparmor_parser"
[   14.267608] type=1400 audit(1367028237.570:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=888 comm="apparmor_parser"
[   14.267776] type=1400 audit(1367028237.570:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=888 comm="apparmor_parser"
[   14.267783] type=1400 audit(1367028237.570:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=889 comm="apparmor_parser"
[   14.267789] type=1400 audit(1367028237.570:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=959 comm="apparmor_parser"
[   14.268018] type=1400 audit(1367028237.570:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=889 comm="apparmor_parser"
[   14.268025] type=1400 audit(1367028237.570:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=959 comm="apparmor_parser"
[   14.278522] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input11
[   14.278627] usbcore: registered new interface driver uvcvideo
[   14.278629] USB Video Class driver (1.1.1)
[   14.293845] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   14.301170] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7619 MBytes.
[   14.301320] <6>[fglrx]   vendor: 1002 device: 68e4 count: 1
[   14.301534] <6>[fglrx] ioport: bar 4, base 0x3000, size: 0x100
[   14.301629] <6>[fglrx] Kernel PAT support is enabled
[   14.301649] <6>[fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1 minors
[   14.311485] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.311571] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   14.311795] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   14.311867] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[   14.373430] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   17.609282] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   17.864724] init: failsafe main process (1039) killed by TERM signal
[   18.720544] type=1400 audit(1367028242.034:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser"
[   22.162850] ppdev: user-space parallel port driver
[   22.230245] init: avahi-cups-reload main process (1309) terminated with status 1
[   22.237807] audit_printk_skb: 63 callbacks suppressed
[   22.237810] type=1400 audit(1367028245.562:33): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1328 comm="apparmor_parser"
[   22.238180] type=1400 audit(1367028245.562:34): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1328 comm="apparmor_parser"
[   22.396655] Bluetooth: Core ver 2.16
[   22.396677] NET: Registered protocol family 31
[   22.396679] Bluetooth: HCI device and connection manager initialized
[   22.396688] Bluetooth: HCI socket layer initialized
[   22.396690] Bluetooth: L2CAP socket layer initialized
[   22.396696] Bluetooth: SCO socket layer initialized
[   22.414699] vboxdrv: Found 4 processor cores.
[   22.414843] vboxdrv: fAsync=0 offMin=0x36c offMax=0x13b0
[   22.414940] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   22.414942] vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004).
[   22.422878] Bluetooth: RFCOMM TTY layer initialized
[   22.422892] Bluetooth: RFCOMM socket layer initialized
[   22.422893] Bluetooth: RFCOMM ver 1.11
[   23.204264] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.204267] Bluetooth: BNEP filters: protocol multicast
[   23.204278] Bluetooth: BNEP socket layer initialized
[   23.256891] vboxpci: IOMMU not found (not registered)
[   26.638685] tg3 0000:02:00.0: irq 45 for MSI/MSI-X
[   26.663013] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.663358] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.711432] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.245460] tg3 0000:02:00.0 eth0: Link is down
[   28.244923] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[   28.245353] <6>[fglrx] Firegl kernel thread PID: 1565
[   28.245471] <6>[fglrx] Firegl kernel thread PID: 1566
[   28.245533] <6>[fglrx] Firegl kernel thread PID: 1567
[   28.245603] <6>[fglrx] IRQ 46 Enabled
[   28.264052] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   28.264054] <6>[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000 
[   28.264056] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 
[   29.240441] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[   29.240445] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[   29.240454] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   37.519100] NET: Registered protocol family 24
[   59.006545] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   59.008146] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   63.486318] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   63.487703] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   63.842364] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   63.843751] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   90.623159] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   90.625332] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  147.125274] systemd-hostnamed[8411]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
acer-aspire-raring-20130427-1.png
附件
attach.zip
(532.67 KiB) 已下载 45 次
上次由 liberize 在 2013-04-27 16:34,总共编辑 1 次。
xtz1990
帖子: 452
注册时间: 2010-06-03 22:51

Re: 升级到13.04后启动很慢

#2

帖子 xtz1990 » 2013-04-27 12:19

不能直接上图么 还上一个压缩包 谁会看啊
liberize
帖子: 41
注册时间: 2013-03-10 13:29
系统: Ubuntu 12.10

Re: 升级到13.04后启动很慢

#3

帖子 liberize » 2013-04-27 16:35

xtz1990 写了:不能直接上图么 还上一个压缩包 谁会看啊
图太大了。。。 :em06
回复