传说中的KMS,怎么没啥感觉啊
发表于 : 2009-10-31 14:55
arch的wiki上这样说的
http://wiki.archlinux.org/index.php/ATI ... _.28KMS.29
1. 先把menu.lst里的vga=794干掉,然后检查/etc/mkinitcpio.conf,默认没有加载任何MODULES,是空的
2. 在/etc/mkinitcpio.conf里把MODULES这行改成MODULES="radeon"
3. sudo mkinitcpio -p kernel26
4. reboot
然后就进来了,整个过程没啥感觉,就是说没觉得有啥爽的
反倒是没有了framebuffer,控制台变成了800x600的,很丑啊
请问是不是哪里没有搞对?
我用grub4dos引导的,不知道有啥问题没有
我的配置是,AMD780G主板,ATI2400pro显卡
kernel26 2.6.31.x
mesa 7.5.x
ati-dri 7.5.x
libgl 7.5.x
xf86-video-ati 6.12.4
这些看了,都符合要求
http://wiki.archlinux.org/index.php/ATI ... _.28KMS.29
我就照做Early start
This method will start KMS as early as possible in the boot process, when the initramfs is loaded.
1) Remove all "vga=" and "video=" options from your kernel appendline in /boot/grub/menu.lst. Using other framebuffer drivers (such as uvesafb/radeonfb) will conflict with KMS. Remove any framebuffer relates modules from /etc/mkinitcpio.conf.
2) Add "radeon" (without quotes) to MODULES array in /etc/mkinitcpio.conf. Depending on your chipset it may be necessary to add "intel_agp" before the radeon module.
3) Re-generate your initcpio:
mkinitcpio -p kernel26
4) Reboot your system.
1. 先把menu.lst里的vga=794干掉,然后检查/etc/mkinitcpio.conf,默认没有加载任何MODULES,是空的
2. 在/etc/mkinitcpio.conf里把MODULES这行改成MODULES="radeon"
3. sudo mkinitcpio -p kernel26
4. reboot
然后就进来了,整个过程没啥感觉,就是说没觉得有啥爽的
反倒是没有了framebuffer,控制台变成了800x600的,很丑啊
请问是不是哪里没有搞对?
我用grub4dos引导的,不知道有啥问题没有
我的配置是,AMD780G主板,ATI2400pro显卡
kernel26 2.6.31.x
mesa 7.5.x
ati-dri 7.5.x
libgl 7.5.x
xf86-video-ati 6.12.4
这些看了,都符合要求