如何配置(reprobe)我的显示器?

参与到Ubuntu的翻译中来
回复
头像
oneleaf
论坛管理员
帖子: 10441
注册时间: 2005-03-27 0:06
系统: Ubuntu 12.04

如何配置(reprobe)我的显示器?

#1

帖子 oneleaf » 2005-03-31 22:01

How can i reprobe my monitor?

Let's say that you installed you Ubuntu box with a 15'' 1024x768 monitor and than you move it and use it with a 19'' 1600x1200 monitor. You can easily reprobe you monitor freq and resolution:
- Identify the driver you are using for you video card (let's say radeon)
- Type, with root privileges (i.e. using sudo)

xresprobe radeon

of course instead of radeon use the appropriate driver

http://www.ubuntulinux.org/support/docu ... obeMonitor
上次由 oneleaf 在 2005-04-12 8:51,总共编辑 1 次。
头像
ct
帖子: 2201
注册时间: 2005-04-06 21:15
来自: 安徽黄山
联系:

如何配置(reprobe)我的显示器?

#2

帖子 ct » 2005-04-08 0:24

让我们首先假设你有台装了Ubuntu的计算机,15寸的、分辨率为1024X768的显示器,然后你换了一台19寸,分辨率为1600X1200的显示器,你需要简单的设置下你的显示器的刷新频率(freq)和分辨率(resolution):

-识别出你的显卡型号以寻找合适的驱动(比如 radeon)

-输入命令,需要有root权限(使用“sudo”提升权限)

xresprobe radeon

于是你的radeon显卡就安装上了合适的驱动了。
头像
millenniumdark
论坛版主
帖子: 4159
注册时间: 2005-07-02 14:41
系统: Ubuntu 14.04 (Kylin)
联系:

#3

帖子 millenniumdark » 2006-08-01 4:44

这个不知道有没有用,先放着
回复