当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 6 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 大家一起来分析这个initrd.gz里面的启动iso镜像的脚本
帖子发表于 : 2010-03-23 16:14 

注册: 2006-03-25 21:24
帖子: 57
送出感谢: 0 次
接收感谢: 0 次
大家一起来分析这个initrd.gz里面的启动iso镜像的脚本suddy,解压开initrd.gz后,是在scripts目录下
代码:
#!/bin/sh

# set -e

export PATH=/usr/bin:/usr/sbin:/bin:/sbin

mountpoint=/cdrom

root_persistence="casper-rw"
home_persistence="home-rw"
root_snapshot_label="casper-sn"
home_snapshot_label="home-sn"

USERNAME=casper
USERFULLNAME="Live session user"
HOST=live
BUILD_SYSTEM=Custom

mkdir -p $mountpoint

[ -f /etc/casper.conf ] && . /etc/casper.conf
export USERNAME USERFULLNAME HOST BUILD_SYSTEM

. /scripts/casper-helpers

if [ ! -f /casper.vars ]; then
    touch /casper.vars
fi

parse_cmdline() {
    for x in $(cat /proc/cmdline); do
        case $x in
       casperroot=*)
      export CASPERROOT="${x#casperroot=}";;
            persistent)
                export PERSISTENT="Yes" ;;
            nopersistent)
                export PERSISTENT="" ;;
            union=*)
                export UNIONFS="${x#union=}";;
            ip*)
                STATICIP=${x#ip=}
                if [ "${STATICIP}" = "" ]; then
                    STATICIP="frommedia"
                fi
                export STATICIP ;;
            ignore_uuid)
                IGNORE_UUID="Yes" ;;
        esac
    done
    if [ "${UNIONFS}" = "" ]; then
        export UNIONFS="aufs"
    fi
}

is_casper_path() {
    if [ "${CASPERROOT}" = "" ]; then
        path=$1
    else
   path="$1/${CASPERROOT}"
    fi
    # modify the path to $1 if it's a iso file
    if [ "$ISISO" != "" ]; then
        path=$1
    fi
    if [ -d "$path/casper" ]; then
        if [ "$(echo $path/casper/*.squashfs)" != "$path/casper/*.squashfs" ] ||
            [ "$(echo $path/casper/*.ext2)" != "$path/casper/*.ext2" ] ||
            [ "$(echo $path/casper/*.dir)" != "$path/casper/*.dir" ]; then
            return 0
        fi
    fi
    return 1
}

matches_uuid() {
    if [ "$IGNORE_UUID" ] || [ ! -e /conf/uuid.conf ]; then
        return 0
    fi
    path="$1"
    uuid="$(cat /conf/uuid.conf)"
    for try_uuid_file in "$path/.disk/casper-uuid"*; do
        [ -e "$try_uuid_file" ] || continue
        try_uuid="$(cat "$try_uuid_file")"
        if [ "$uuid" = "$try_uuid" ]; then
            return 0
        fi
    done
    return 1
}

get_backing_device() {
    case "$1" in
   # add the ext of *.fs to doing with storefilesystem sth like Backtrack.fs
        *.squashfs|*.ext2|*.fs)
            echo $(setup_loop "$1" "loop" "/sys/block/loop*")
            ;;
        *.dir)
            echo "directory"
            ;;
        *)
            panic "Unrecognized casper filesystem: $1"
            ;;
    esac
}

match_files_in_dir() {
    # Does any files match pattern $1 ?

    local pattern="$1"
    if [ "$(echo $pattern)" != "$pattern" ]; then
        return 0
    fi
    return 1
}

mount_images_in_directory() {
    if [ "${CASPERROOT}" = "" ]; then
        directory="$1"
    else
   directory="$1/${CASPERROOT}"
    fi
    if [ "$1" = "/iso9660" ]; then
        directory="$1"
    fi
    rootmnt="$2"
    if match_files_in_dir "$directory/casper/*.squashfs" ||
        match_files_in_dir "$directory/casper/*.ext2" ||
        match_files_in_dir "$directory/casper/*.dir"; then
        setup_unionfs "$directory/casper" "$rootmnt"
    else
        :
    fi
}

is_nice_device() {
    sysfs_path="${1#/sys}"
    if /lib/udev/path_id "${sysfs_path}" | grep -E -q "ID_PATH=(usb|pci-[^-]*-(ide|scsi|usb))"; then
        return 0
    fi
    return 1
}

copy_live_to() {
    copyfrom="${1}"
    copytodev="${2}"
    copyto="${copyfrom}_swap"

    size=$(fs_size "" ${copyfrom} "used")

    if [ "${copytodev}" = "ram" ]; then
        # copying to ram:
        freespace=$( expr $(awk '/MemFree/{print $2}' /proc/meminfo) + $( cat /proc/meminfo | grep Cached | head -n 1 | awk '/Cached/{print $2}' - ) )
        mount_options="-o size=${size}k"
        free_string="memory"
        fstype="tmpfs"
        dev="/dev/shm"
    else
        # it should be a writable block device
        if [ -b "${copytodev}" ]; then
            dev="${copytodev}"
            free_string="space"
            fstype=$(get_fstype "${dev}")
            freespace=$(fs_size "${dev}")
        else
            [ "$quiet" != "y" ] && log_warning_msg "${copytodev} is not a block device."
            return 1
        fi
    fi
    if [ "${freespace}" -lt "${size}" ] ; then
        [ "$quiet" != "y" ] && log_warning_msg "Not enough free ${free_string} (${freespace}k > ${size}k) to copy live media in ${copytodev}."
        return 1
    fi

    # begin copying..
    mkdir "${copyto}"
    echo "mount -t ${fstype} ${mount_options} ${dev} ${copyto}"
    mount -t "${fstype}" ${mount_options} "${dev}" "${copyto}"
    cp -a ${copyfrom}/* ${copyto} # "cp -a" from busybox also copies hidden files
    umount ${copyfrom}
    mount -r -o move ${copyto} ${copyfrom}
    rmdir ${copyto}
    return 0
}

do_netmount() {
    rc=1

    modprobe "${MP_QUIET}" af_packet # For DHCP

    /sbin/udevadm trigger
    /sbin/udevadm settle

    ipconfig ${DEVICE} /tmp/net-${DEVICE}.conf | tee /netboot.config

    if [ "${NFSROOT}" = "auto" ]; then
        NFSROOT=${ROOTSERVER}:${ROOTPATH}
    fi

    [ "$quiet" != "y" ] && log_begin_msg "Trying netboot from ${NFSROOT}"

    if [ "${NETBOOT}" != "nfs" ] && do_cifsmount ; then
        rc=0
    elif do_nfsmount ; then
        NETBOOT="nfs"
        export NETBOOT
        rc=0
    fi

    [ "$quiet" != "y" ] && log_end_msg
    return ${rc}
}

do_nfsmount() {
    rc=1
    modprobe "${MP_QUIET}" nfs
    if [ -z "${NFSOPTS}" ]; then
        NFSOPTS=""
    fi

    [ "$quiet" != "y" ] && log_begin_msg "Trying nfsmount -o nolock -o ro ${NFSOPTS} ${NFSROOT} ${mountpoint}"
    # FIXME: This while loop is an ugly HACK round an nfs bug
    i=0
    while [ "$i" -lt 60 ]; do
        nfsmount -o nolock -o ro ${NFSOPTS} "${NFSROOT}" "${mountpoint}" && rc=0 && break
        sleep 1
        i="$(($i + 1))"
    done
    return ${rc}
}

do_cifsmount() {
    rc=1
    if [ -x "/sbin/mount.cifs" ]; then
        if [ -z "${NFSOPTS}" ]; then
            CIFSOPTS="-ouser=root,password="
        else
            CIFSOPTS="${NFSOPTS}"
        fi

        [ "$quiet" != "y" ] && log_begin_msg "Trying mount.cifs ${NFSROOT} ${mountpoint} ${CIFSOPTS}"
        modprobe "${MP_QUIET}" cifs

        if mount.cifs "${NFSROOT}" "${mountpoint}" "${CIFSOPTS}" ; then
            rc=0
        fi
    fi
    return ${rc}
}

do_snap_copy ()
{
    fromdev="${1}"
    todir="${2}"
    snap_type="${3}"

    size=$(fs_size "${fromdev}" "" "used")

    if [ -b "${fromdev}" ]; then
        # look for free mem
        if [ -n "${HOMEMOUNTED}" -a "${snap_type}" = "HOME" ]; then
            todev=$(cat /proc/mounts | grep -s " $(base_path ${todir}) " | awk '{print $1}' )
            freespace=$(df -k  | grep -s ${todev} | awk '{print $4}')
        else
            freespace=$( expr $(awk '/MemFree/{print $2}' /proc/meminfo) + $( cat /proc/meminfo | grep Cached | head -n 1 | awk '/Cached/{print $2}' - ))
        fi

        tomount="/mnt/tmpsnap"
        if [ ! -d "${tomount}" ] ; then
            mkdir -p "${tomount}"
        fi

        fstype=$(get_fstype "${fromdev}")
        if [ -n "${fstype}" ]; then
            # Copying stuff...
            mount -t "${fstype}" -o ro,noatime "${fromdev}" "${tomount}"
            cp -a "${tomount}"/* ${todir}
            umount "${tomount}"
        else
            log_warning_msg "Unrecognized fstype: ${fstype} on ${fromdev}:${snap_type}"
        fi

        rmdir "${tomount}"
        if echo ${fromdev} | grep -qs loop; then
           losetup -d "${fromdev}"
        fi
        return 0
    else
        return 1
        [ "$quiet" != "y" ] && log_warning_msg "Unable to find the snapshot ${snap_type} medium"
    fi
}

try_snap ()
{
    # Look for $snap_label.* in block devices and copy the contents to $snap_mount
    #   and remember the device and filename for resync on exit in casper.init

    snap_label="${1}"
    snap_mount="${2}"
    snap_type="${3}"

    snapdata=$(find_files "${snap_label}.squashfs ${snap_label}.cpio.gz ${snap_label}.ext2")
    if [ ! -z "${snapdata}" ]; then
        snapdev="$(echo ${snapdata} | cut -f1 -d ' ')"
        snapback="$(echo ${snapdata} | cut -f2 -d ' ')"
        snapfile="$(echo ${snapdata} | cut -f3 -d ' ')"
        if echo "${snapfile}" | grep -qs '\(squashfs\|ext2\)'; then
            # squashfs or ext2 snapshot
            dev=$(get_backing_device "${snapback}/${snapfile}")
            if ! do_snap_copy "${dev}" "${snap_mount}" "${snap_type}"; then
                 log_warning_msg "Impossible to include the ${snapfile} Snapshot"
                 return 1
            fi
        else
            # cpio.gz snapshot
            if ! (cd "${snap_mount}" && zcat "${snapback}/${snapfile}" | cpio -i -u -d 2>/dev/null) ; then
                log_warning_msg "Impossible to include the ${snapfile} Snapshot"
                return 1
            fi
        fi
        umount "${snapback}"
    else
        dev=$(find_cow_device "${snap_label}")
        if [ -b ${dev} ]; then
            if echo "${dev}" | grep -qs loop; then
                # strange things happens, user confused?
                snaploop=$( losetup ${dev} | awk '{print $3}' | tr -d '()' )
                snapfile=$(basename ${snaploop})
                snapdev=$(cat /proc/mounts | awk '{print $2,$1}' | grep -es "^$( dirname ${snaploop} )" | cut -f2 -d ' ')
            else
                snapdev="${dev}"
            fi
            if ! do_snap_copy "${dev}" "${snap_mount}" "${snap_type}" ; then
                log_warning_msg "Impossible to include the ${snap_label} Snapshot"
                return 1
            else
                if [ -n "${snapfile}" ]; then
                     # it was a loop device, user confused
                     umount ${snapdev}
                fi
            fi
        else
            log_warning_msg "Impossible to include the ${snap_label} Snapshot"
            return 1
        fi
    fi
    echo "export ${snap_type}SNAP="${snap_mount}":${snapdev}:${snapfile}" >> /etc/casper.conf # for resync on reboot/halt
    return 0
}

setup_unionfs() {
    image_directory="$1"
    rootmnt="$2"

    modprobe "${MP_QUIET}" -b ${UNIONFS}

    # run-init can't deal with images in a subdir, but we're going to
    # move all of these away before it runs anyway.  No, we're not,
    # put them in / since move-mounting them into / breaks mono and
    # some other apps.

    croot="/"

    # Let's just mount the read-only file systems first
    rofsstring=""
    rofslist=""
    if [ "${NETBOOT}" = "nfs" ] ; then
        roopt="nfsro" # go aroung a bug in nfs-unionfs locking
    elif [ "${UNIONFS}" = "aufs" ]; then
        roopt="rr"
    else
        roopt="ro"
    fi

    mkdir -p "${croot}"
    for image_type in "ext2" "squashfs" "dir" ; do
        for image in "${image_directory}"/*."${image_type}"; do
            imagename=$(basename "${image}")
            if [ -d "${image}" ]; then
                # it is a plain directory: do nothing
                rofsstring="${image}=${roopt}:${rofsstring}"
                rofslist="${image} ${rofslist}"
            elif [ -f "${image}" ]; then
                backdev=$(get_backing_device "$image")
                fstype=$(get_fstype "${backdev}")
                if [ "${fstype}" = "unknown" ]; then
                    panic "Unknown file system type on ${backdev} (${image})"
                fi
                mkdir -p "${croot}/${imagename}"
                mount -t "${fstype}" -o ro,noatime "${backdev}" "${croot}/${imagename}" || panic "Can not mount $backdev ($image) on ${croot}/${imagename}" && rofsstring="${croot}/${imagename}=${roopt}:${rofsstring}" && rofslist="${croot}/${imagename} ${rofslist}"
            fi
        done
    done
    rofsstring=${rofsstring%:}

    mkdir -p /cow
    cowdevice="tmpfs"
    cow_fstype="tmpfs"
    cow_mountopt="rw,noatime,mode=755"

    # Looking for "${root_persistence}" device or file
    if [ -n "${PERSISTENT}" ]; then
        cowprobe=$(find_cow_device "${root_persistence}")
        if [ -b "${cowprobe}" ]; then
            cowdevice=${cowprobe}
            cow_fstype=$(get_fstype "${cowprobe}")
       cow_mountopt="rw,noatime"
        else
            [ "$quiet" != "y" ] && log_warning_msg "Unable to find the persistent medium"
        fi
    fi

    mount -t ${cow_fstype} -o ${cow_mountopt} ${cowdevice} /cow || panic "Can not mount $cowdevice on /cow"

    # mkdir a filesystem to mount the *.fs
    if [ "${CASPERROOT}" = "" ]; then
        storefs="$mountpoint"
    else
   storefs="$mountpoint/${CASPERROOT}"
    fi
    # if a *.fs in the patch of the boot directory, use unionfs to mount to /
    if [ "$(echo $storefs/*.fs)" != "$storefs/*.fs" ] ; then
   rwfs="$(echo $storefs/*.fs)"
   #mkdir -p /storefs
   #storefs_fstype=$(get_fstype $rwfs)
   #storefs_mountopt="rw,noatime"
   #mount -t  $storefs_fstype -o $storefs_mountopt $rwfs /storefs

   storefs_backdev=$(get_backing_device "$rwfs")
        storefs_fstype=$(get_fstype "${storefs_backdev}")
        if [ "${storefs_fstype}" = "unknown" ]; then
      panic "Unknown file system type on ${storefs_backdev} ($rwfs)"
   fi
        mkdir -p "/storefs"
        mount -t "${storefs_fstype}" -o rw,noatime "${storefs_backdev}" "/storefs" || panic "Can not mount $storefs_backdev ($rwfs) on /storefs"
           
   #mkdir -p "/root1"
   # mount with storefs to store the change
   mount -t ${UNIONFS} -o noatime,dirs=//storefs=rw:$rofsstring ${UNIONFS} "$rootmnt" || panic "${UNIONFS} mount failed"
   #mount -t ${UNIONFS} -o noatime,dirs=//storefs=rw:/cow=rw:$rofsstring ${UNIONFS} "$rootmnt" || panic "${UNIONFS} mount failed"
   #mount -t ${UNIONFS} -o noatime,dirs=//storefs=rw:/cow=rw:$rofsstring ${UNIONFS} "/root1" || panic "${UNIONFS} mount failed"
    else
   mount -t ${UNIONFS} -o noatime,dirs=/cow=rw:$rofsstring ${UNIONFS} "$rootmnt" || panic "${UNIONFS} mount failed"
    fi

    # if a *.swap in the patch of the boot directory, use it like a swap file
    if [ "$(echo $storefs/*.swap)" != "$storefs/*.swap" ] ; then
   swapfs="$(echo $storefs/*.swap)"
   swapon $swapfs
   echo "$swapfs swap  swap  defaults  0  0">> "$rootmnt"/etc/swap_fstab
    fi

    # Adding other custom mounts
    if [ -n "${PERSISTENT}" ]; then
        # directly mount /home
        # FIXME: add a custom mounts configurable system
        homecow=$(find_cow_device "${home_persistence}" )
        if [ -b "${homecow}" ]; then
            mount -t $(get_fstype "${homecow}") -o rw,noatime "${homecow}" "${rootmnt}/home"
            export HOMEMOUNTED=1 # used to proper calculate free space in do_snap_copy()
        else
            [ "$quiet" != "y" ] && log_warning_msg "Unable to find the persistent home medium"
        fi
        # Look for other snapshots to copy in
        try_snap "${root_snapshot_label}" "${rootmnt}" "ROOT"
        try_snap "${home_snapshot_label}" "${rootmnt}/home" "HOME"
    fi

    if [ -n "${SHOWMOUNTS}" ]; then
        for d in ${rofslist}; do
            mkdir -p "${rootmnt}/casper/${d##*/}"
            case d in
                *.dir) # do nothing # mount -o bind "${d}" "${rootmnt}/casper/${d##*/}"
                    ;;
                *) mount -o move "${d}" "${rootmnt}/casper/${d##*/}"
                    ;;
            esac
        done
        # shows cow fs on /cow for use by casper-snapshot
        mkdir -p "${rootmnt}/cow"
        mount -o bind /cow "${rootmnt}/cow"
    fi

    # move the stofs ; no head in busybox-initramfs
    if [ "${storefs_fstype}" != "" ]; then
   mkdir -p "${rootmnt}/rwfs"
   mount -o move "/storefs" "${rootmnt}/rwfs"
    fi

    for d in $(mount -t iso9660 | cut -d\  -f 3); do
       mkdir -p "$rootmnt/iso9660"
       mount -o move "${d}" "$rootmnt/iso9660"
    done

    # move the first mount; no head in busybox-initramfs
    for d in $(mount -t squashfs | cut -d\  -f 3); do
        mkdir -p "${rootmnt}/rofs"
        mount -o move "${d}" "${rootmnt}/rofs"
        break
    done
}

find_iso()
{
   local isoroot="/iso9660"
   local tmproot=$1
   if [ "${CASPERROOT}" = "" ]; then
        isos=`ls ${tmproot}/*.iso 2>/dev/null` || return 1
   else
   isos=`ls ${tmproot}/${CASPERROOT}/*.iso 2>/dev/null` || return 1
   fi
   modprobe loop
   mkdir -p "$isoroot"
   for iso in ${isos}
   do
       mount -t iso9660 -o loop $iso $isoroot 2>/dev/null || continue
       #if casper_path "$isoroot"; then
       #send a sign to the function that is a iso file
       ISISO="YES";
       if is_casper_path "$isoroot" ; then
           #echo "$isoroot"/casper/filesystem.squashfs
           #in_iso_squashfs="$isoroot"/casper/filesystem.squashfs
      in_iso_squashfs="$isoroot"
           return 0       
   else
      ISISO=""
           umount "$isoroot"
       fi
   done
   unset isos
   unset iso
   return 1
}

check_dev ()
{
    sysdev="${1}"
    devname="${2}"
    skip_uuid_check="${3}"
    if [ -z "${devname}" ]; then
        devname=$(sys2dev "${sysdev}")
    fi

    if [ -d "${devname}" ]; then
        mount -o bind "${devname}" $mountpoint || continue
        if is_casper_path $mountpoint; then
            echo $mountpoint
            return 0
        else
            umount $mountpoint
        fi
    fi

    if [ -n "${LIVEMEDIA_OFFSET}" ]; then
        loopdevname=$(setup_loop "${devname}" "loop" "/sys/block/loop*" "${LIVEMEDIA_OFFSET}")
        devname="${loopdevname}"
    fi

    fstype=$(get_fstype "${devname}")
    if is_supported_fs ${fstype}; then
   if [ ${fstype}="ntfs" ]; then
      mount -t ntfs-3g -o rw,noatime "${devname}" $mountpoint || continue
   else
      mount -t ${fstype} -o rw,noatime "${devname}" $mountpoint || continue
   fi
   if find_iso $mountpoint ; then
      echo $in_iso_squashfs
      return 0
   fi
        if is_casper_path $mountpoint && \
           ([ "$skip_uuid_check" ] || matches_uuid $mountpoint); then
            echo $mountpoint
            return 0
        else
            umount $mountpoint
        fi
    fi

    if [ -n "${LIVEMEDIA_OFFSET}" ]; then
        losetup -d "${loopdevname}"
    fi
    return 1
}

find_livefs() {
    timeout="${1}"
    # first look at the one specified in the command line
    if [ ! -z "${LIVEMEDIA}" ]; then
        if check_dev "null" "${LIVEMEDIA}" "skip_uuid_check"; then
            return 0
        fi
    fi
    # don't start autodetection before timeout has expired
    if [ -n "${LIVEMEDIA_TIMEOUT}" ]; then
        if [ "${timeout}" -lt "${LIVEMEDIA_TIMEOUT}" ]; then
            return 1
        fi
    fi
    # or do the scan of block devices
    for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "/(loop|ram|fd)"); do
        devname=$(sys2dev "${sysblock}")
        fstype=$(get_fstype "${devname}")
        if /lib/udev/cdrom_id ${devname} > /dev/null; then
            if check_dev "null" "${devname}" ; then
                return 0
            fi
        elif is_nice_device "${sysblock}" ; then
            for dev in $(subdevices "${sysblock}"); do
                if check_dev "${dev}" ; then
                    return 0
                fi
            done
        elif [ "${fstype}" = "squashfs" -o \
                "${fstype}" = "ext3" -o \
                "${fstype}" = "ext2" ]; then
            # This is an ugly hack situation, the block device has
            # an image directly on it.  It's hopefully
            # casper, so take it and run with it.
            ln -s "${devname}" "${devname}.${fstype}"
            echo "${devname}.${fstype}"
            return 0
        fi
    done
    return 1
}

set_usplash_timeout() {
    if [ -x /sbin/usplash_write ]; then
        /sbin/usplash_write "TIMEOUT 120"
    fi
}

mountroot() {
    exec 6>&1
    exec 7>&2
    exec > casper.log
    exec 2>&1

    parse_cmdline

    set_usplash_timeout
    [ "$quiet" != "y" ] && log_begin_msg "Running /scripts/casper-premount"
    run_scripts /scripts/casper-premount
    [ "$quiet" != "y" ] && log_end_msg

    # Needed here too because some things (*cough* udev *cough*)
    # changes the timeout

    set_usplash_timeout

    if [ ! -z "${NETBOOT}" ]; then
        if do_netmount ; then
            livefs_root="${mountpoint}"
        else
            panic "Unable to find a live file system on the network"
        fi
    else
        # Scan local devices for the image
        i=0
        while [ "$i" -lt 60 ]; do
            livefs_root=$(find_livefs $i)
            if [ "${livefs_root}" ]; then
                break
            fi
            sleep 1
            i="$(($i + 1))"
        done
    fi

    if [ -z "${livefs_root}" ]; then
        panic "Unable to find a medium containing a live file system"
    fi

    if [ "${TORAM}" ]; then
        live_dest="ram"
    elif [ "${TODISK}" ]; then
        live_dest="${TODISK}"
    fi
    if [ "${live_dest}" ]; then
        log_begin_msg "Copying live_media to ${live_dest}"
        copy_live_to "${livefs_root}" "${live_dest}"
        log_end_msg
    fi
    mount_images_in_directory "${livefs_root}" "${rootmnt}"

    log_end_msg

    maybe_break casper-bottom
    [ "$quiet" != "y" ] && log_begin_msg "Running /scripts/casper-bottom"

    run_scripts /scripts/casper-bottom
    [ "$quiet" != "y" ] && log_end_msg

    exec 1>&6 6>&-
    exec 2>&7 7>&-
    cp casper.log "${rootmnt}/var/log/"
}



页首
 用户资料  
 
2 楼 
 文章标题 : Re: 大家一起来分析这个initrd.gz里面的启动iso镜像的脚本
帖子发表于 : 2010-03-23 16:32 
头像

注册: 2007-09-29 3:09
帖子: 5777
送出感谢: 0 次
接收感谢: 5
你召唤一下xiooli或者yaska就可以...


_________________
HUNT Unfortunately No Talent...


页首
 用户资料  
 
3 楼 
 文章标题 : Re: 大家一起来分析这个initrd.gz里面的启动iso镜像的脚本
帖子发表于 : 2010-03-24 9:23 
头像

注册: 2006-04-12 20:05
帖子: 8495
地址: 杭州
送出感谢: 0 次
接收感谢: 8
好长。。。。


_________________
关注我的blog: ε==3


页首
 用户资料  
 
4 楼 
 文章标题 : Re: 大家一起来分析这个initrd.gz里面的启动iso镜像的脚本
帖子发表于 : 2010-03-24 9:25 

注册: 2007-08-02 20:29
帖子: 21302
系统: 窓辺とうこ
送出感谢: 0 次
接收感谢: 22
分析什么哦?那么长的汉字都不愿看了,别说代码


页首
 用户资料  
 
5 楼 
 文章标题 : Re: 大家一起来分析这个initrd.gz里面的启动iso镜像的脚本
帖子发表于 : 2010-03-24 9:26 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 274
casper-rw的,看到就不搞了。 :em04 罗嗦。


_________________
● 鸣学


页首
 用户资料  
 
6 楼 
 文章标题 : Re: 大家一起来分析这个initrd.gz里面的启动iso镜像的脚本
帖子发表于 : 2010-03-24 11:15 
头像

注册: 2007-11-19 21:51
帖子: 6956
地址: 成都
送出感谢: 0 次
接收感谢: 4
尚有几个脚本没有给出,无法完全搞清细节,但是大致路线都差不多:

将 iso 挂载到 /cdmount, 从里面找 squashfs 文件(如果找到那么将其值赋予 ${livefs_root},创建连接到 "${devname}.${fstype}" 猜测大概是类似 xxx.iso 之类的,这个目录如果是非网络启动的话应该就是 /cdmount 的链接),然后在里面找 casper/*.squashfs|.ext2|.dir, 找到后将找到我东西挂载,然后设置 unionfs 到 $rootmnt,这就构建好了 unionfs,然后 run_scripts /scripts/casper-bottom 大概是 chroot 到 $rootmnt 然后启动 $rootmnt 里面的 init 脚本,初始化系统并启动。


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 6 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译