双屏配置文件

仅供存放个人的配置文件,不要在本版发问。
回复
mrzenix
帖子: 10
注册时间: 2007-06-06 10:40
送出感谢: 0
接收感谢: 0

双屏配置文件

#1

帖子 mrzenix » 2007-11-29 8:26

代码: 全选

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen         "Screen0" 0 0
	Screen         "Screen1" RightOf "Screen0"
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
	InputDevice    "Synaptics Touchpad"
#	Option	    "Xinerama" "on"
#	Option	    "Clone" "off"
EndSection



Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"aticonfig-Device[0]"
	Boardname	"ati"
   Option        "VideoOverlay" "on"
   Option        "OpenGLOverlay" "off"
	Busid		"PCI:1:0:0"
	Driver		"fglrx"
	Screen	0
EndSection

Section "Device"
	Identifier	"aticonfig-Device[1]"
	Boardname	"ati"
   Option        "VideoOverlay" "on"
   Option        "OpenGLOverlay" "off"
	Busid		"PCI:1:0:0"
	Driver		"fglrx"
	Screen	1
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]"
    VertRefresh  60.0 - 70.0
    HorizSync    30 - 75
    # 1024x768 @ 85.00 Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
    Modeline "1280x1024_70.00"  94.39  1024 1088 1200 1376  768 769 772 807  -HSync +Vsync
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection


Section "Monitor"
    Identifier   "aticonfig-Monitor[1]"
    VertRefresh  60.0 - 70.0
    HorizSync 10 - 40
    # 800x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 38.22 MHz
    #Modeline "1280x1024_60.00"  38.22  800 832 912 1024  600 601 604 622  -HSync +Vsync
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection


Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device     "aticonfig-Device[0]"
    Monitor    "aticonfig-Monitor[0]"
    DefaultDepth     24
    SubSection "Display"
        Viewport  0 0
        Depth     24
        Modes     "1280x1024"
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[1]"
    Device     "aticonfig-Device[1]"
    Monitor    "aticonfig-Monitor[1]"
    DefaultDepth     24
    SubSection "Display"
        Viewport  0 0
        Depth     24
        Modes     "1280x1024"
    EndSubSection
EndSection



Section "screen"##
	Identifier	"Default Screen"
	Device		"Generic Video Card"
	Monitor		"LEN L171"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Virtual	1792	1344
		      Modes		"1280x1024@75"	"1280x960@60"	"1152x864@75"	"1280x1024@60"	"1024x768@60"	"1280x960@75"	"1024x768@70"	"1400x1050@60"	"1024x768@75"	"1400x1050@75"	"832x624@75"	"1600x1200@65"	"800x600@60"	"1600x1200@60"	"800x600@75"	"1792x1344@60"	"800x600@72"	"800x600@56"	"640x480@75"	"640x480@72"	"640x480@60"
	EndSubSection
EndSection

Section "serverLayout"#
	Identifier	"Default Layout"
  screen 0 "Default Screen" 0 0
  screen 1 "screen1" rightof "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
EndSection
Section "Module"
	Load		"glx"
	Load		"dbe"
	Load		"v4l"
EndSection
Section "Extensions"
	Option		"Composite"	"0"
EndSection
Section "device" #    
	Identifier	"device1"
	Boardname	"ati"
	Busid		"PCI:1:0:0"
	Driver		"ati"
	Screen	1
EndSection
Section "screen" #    
	Identifier	"screen1"
	Device		"device1"
	Defaultdepth	24
	Monitor		"monitor1"
	SubSection "Display"
		Depth	24
		Modes		"1280x1024@60"	"1280x960@75"	"1280x960@60"	"1400x1050@60"	"1280x1024@75"	"1400x1050@75"	"1152x864@75"	"1600x1200@65"	"1024x768@60"	"1600x1200@60"	"1024x768@70"	"1792x1344@60"	"1024x768@75"	"832x624@75"	"800x600@60"	"800x600@75"	"800x600@72"	"800x600@56"	"640x480@75"	"640x480@72"	"640x480@60"
	EndSubSection
EndSection
Section "monitor" #    
	Identifier	"monitor1"
	Vendorname	"Plug 'n' Play"
	Modelname	"Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
	Gamma	1.0
EndSection
Section "ServerFlags"
	Option		"Xinerama"	"true"
EndSection
Section "device" #   
	Identifier	"device2"
	Boardname	"VESA driver (generic)"
	Busid		"PCI:1:0:1"
	Driver		"vesa"
	Screen	0
EndSection
Section "screen" #   
	Identifier	"screen2"
	Device		"device2"
	Defaultdepth	24
	Monitor		"monitor2"
EndSection
Section "monitor" #   
	Identifier	"monitor2"
	Gamma	1.0
EndSection
头像
bones7456
论坛版主
帖子: 8495
注册时间: 2006-04-12 20:05
来自: 杭州
送出感谢: 0
接收感谢: 8 次
联系:

#2

帖子 bones7456 » 2007-11-29 9:17

mark.
以后有机会试试.
关注我的blog: ε==3
头像
eexpress
帖子: 58428
注册时间: 2005-08-14 21:55
来自: 长沙
送出感谢: 4 次
接收感谢: 256 次

#3

帖子 eexpress » 2007-11-29 9:33

bones7456
nv的,不需要这样。麻烦的。
● 鸣学
头像
bones7456
论坛版主
帖子: 8495
注册时间: 2006-04-12 20:05
来自: 杭州
送出感谢: 0
接收感谢: 8 次
联系:

#4

帖子 bones7456 » 2007-11-29 9:35

eexpress 写了:bones7456
nv的,不需要这样。麻烦的。
那nv的需要怎么样?
关注我的blog: ε==3
头像
zhuqin_83
帖子: 10606
注册时间: 2006-05-13 4:02
送出感谢: 0
接收感谢: 7 次
联系:

#5

帖子 zhuqin_83 » 2007-11-29 21:35

ati不需要这样的,直接用设置中心改。何况你的分辨率一样,最简单不过。
HP Pavilion DV6-2064CA: AMD Turion II Ultra Dual-Core Mobile M640, HD4650, 2GBx2 DDR2-800, Seagate 500GB 7200RPM SATA, BD-ROM
DELL UltraSharp 2209WA
Arch64, Testing repo
回复

回到 “个人配置文件存放点”