当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 10 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : hiweed真是不错
帖子发表于 : 2007-07-31 0:44 

注册: 2007-07-14 17:55
帖子: 11
送出感谢: 0 次
接收感谢: 0 次
一装上就可以用了。
只有一个问题:我是宽屏啊,怎么把分辨率改成1440*900呢?


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-07-31 1:14 
头像

注册: 2006-05-09 9:59
帖子: 513
地址: 四川成都
送出感谢: 1
接收感谢: 0 次
要装显卡的商业驱动


N卡的话,可以用 nvidia-glx / nvidia-xgl-new 装好后,sudo nvidia-xconfig


_________________
http://kuan.fm xiaosilent's Blog


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-07-31 7:39 

注册: 2007-02-10 21:14
帖子: 67
地址: The Earth
送出感谢: 0 次
接收感谢: 0 次
按照我的经验,如果驱动搞定了,只要修改xwindow设置就可以了。


_________________
Postgraduate majoring in Finance and Economics
My blog: http://econ.shineblog.com
Homepage: http://www.macro2.cn


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-07-31 10:18 
头像

注册: 2005-03-30 0:27
帖子: 3294
送出感谢: 0 次
接收感谢: 2
如果是新的 LCD + 较旧的显卡,需要手工修改下 /etc/X11/xorg.conf
(执行 gksudo leafpad /etc/X11/xorg.conf 来修改)


贴一个 三星 961GW 1440x900 19' 宽屏的 /etc/X11/xorg.conf 配置
参照里边粗体部分

引用:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection


Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection


Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection


Section "ServerFlags"
Option "Xinerama" "0"
EndSection


Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection


Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection


Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "@@@"
HorizSync 30 - 81
VertRefresh 56 - 75

Option "DPMS"
Modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
EndSection


Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce4 MX 440 with AGP8X"
Option "UseEDID" "False"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "CRT: 1440x900_60 +0+0; CRT: 1024x768_75 +0+0; CRT: 1024x768_60 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"

SubSection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection

EndSection


_________________
跃过无数的时间断层,只为了在


页首
 用户资料  
 
5 楼 
 文章标题 : 我用手册上的sudo apt-get install nvidia-glx 安装显卡驱动出现的错误
帖子发表于 : 2007-08-03 22:22 

注册: 2007-07-14 17:55
帖子: 11
送出感谢: 0 次
接收感谢: 0 次
安装 nvidia-glx-legacy 也是一样virtualbox出错,请问huahua是什么原因啊?
获取:1 http://archive.ubuntu.org.cn dapper-security/restricted nvidia-glx-legacy 1.0.7174+2.6.15.12-28.2 [3061kB]
下载 3061kB,耗时 14s (206kB/s)
(正在读取数据库 ... 系统当前总共安装有 72965 个文件和目录。)
正在删除 nvidia-glx ...
ldconfig: /usr/lib/libgaim.so.0 is not a symbolic link

ldconfig: /usr/lib/libgaim-client.so.0 is not a symbolic link

选中了曾被取消选择的软件包 nvidia-glx-legacy。
(正在读取数据库 ... 系统当前总共安装有 72920 个文件和目录。)
正在解压缩 nvidia-glx-legacy (从 .../nvidia-glx-legacy_1.0.7174+2.6.15.12-28.2_i386.deb) ...
正在设置 virtualbox (1.3.6_Ubuntu_dapper) ...

Creating group 'vboxusers'. VM users must be member of that group!

* Starting VirtualBox kernel module vboxdrv FATAL: Module vboxdrv not found.

* Modprobe vboxdrv failed. Please use 'dmesg' to find out why.
invoke-rc.d: initscript virtualbox, action "start" failed.
dpkg:处理 virtualbox (--configure)时出错:
子进程·post-installation script·返回了错误号·1
正在设置 nvidia-glx-legacy (1.0.7174+2.6.15.12-28.2) ...
ldconfig: /usr/lib/libgaim.so.0 is not a symbolic link

ldconfig: /usr/lib/libgaim-client.so.0 is not a symbolic link


在处理时有错误发生:
virtualbox
E: Sub-process /usr/bin/dpkg returned an error code (1)



huangjiahua 写道:
如果是新的 LCD + 较旧的显卡,需要手工修改下 /etc/X11/xorg.conf
(执行 gksudo leafpad /etc/X11/xorg.conf 来修改)


贴一个 三星 961GW 1440x900 19' 宽屏的 /etc/X11/xorg.conf 配置
参照里边粗体部分

引用:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection


Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection


Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection


Section "ServerFlags"
Option "Xinerama" "0"
EndSection


Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection


Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection


Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "@@@"
HorizSync 30 - 81
VertRefresh 56 - 75

Option "DPMS"
Modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
EndSection


Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce4 MX 440 with AGP8X"
Option "UseEDID" "False"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "CRT: 1440x900_60 +0+0; CRT: 1024x768_75 +0+0; CRT: 1024x768_60 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"

SubSection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection

EndSection


页首
 用户资料  
 
6 楼 
 文章标题 : 另外,用你里边的粗体部分也搞不定啊。。。
帖子发表于 : 2007-08-03 22:24 

注册: 2007-07-14 17:55
帖子: 11
送出感谢: 0 次
接收感谢: 0 次
huangjiahua 写道:
如果是新的 LCD + 较旧的显卡,需要手工修改下 /etc/X11/xorg.conf
(执行 gksudo leafpad /etc/X11/xorg.conf 来修改)


贴一个 三星 961GW 1440x900 19' 宽屏的 /etc/X11/xorg.conf 配置
参照里边粗体部分

引用:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection


Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection


Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection


Section "ServerFlags"
Option "Xinerama" "0"
EndSection


Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection


Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection


Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "@@@"
HorizSync 30 - 81
VertRefresh 56 - 75

Option "DPMS"
Modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
EndSection


Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce4 MX 440 with AGP8X"
Option "UseEDID" "False"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "CRT: 1440x900_60 +0+0; CRT: 1024x768_75 +0+0; CRT: 1024x768_60 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"

SubSection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection

EndSection


页首
 用户资料  
 
7 楼 
 文章标题 : 贴一下我的xorg.conf,请教了!显示器19''宽屏液晶,型号是SyncMaster 940bw, 显卡nVidia
帖子发表于 : 2007-08-03 22:49 

注册: 2007-07-14 17:55
帖子: 11
送出感谢: 0 次
接收感谢: 0 次
显示器19''宽屏液晶,型号是SyncMaster 940bw, 显卡nVidia GeForce 6100
需要安装驱动么?

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "vesa"
BusID "PCI:0:5:0"
EndSection

Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
HorizSync 30 - 81
VertRefresh 56 - 75
Modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "SyncMaster"
DefaultDepth 24
Option "metamodes" "CRT: 1440x900_60 +0+0; CRT: 1024x768_75 +0+0; CRT: 1024x768_60 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
SubSection "Display"
Depth 1
Modes "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2007-08-04 12:22 
头像

注册: 2005-03-30 0:27
帖子: 3294
送出感谢: 0 次
接收感谢: 2
驱动是安装 nvidia-glx 而不是 nvidia-glx-legacy

关于 vbox ,需要升级 linux-686 linux-headers-686 然后重启用新内核

记得把你的用户加入 'vboxusers' 组
sudo adduser $USER vboxusers


_________________
跃过无数的时间断层,只为了在


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2007-08-07 19:40 
头像

注册: 2007-04-28 21:38
帖子: 1026
送出感谢: 0 次
接收感谢: 0 次
高手阿


_________________
thinkpad x61 2G DDR no cdrom
--------------------------------------------
ABS学习中
sed学习中
awk学习中
perl学习中
新手描述不清,老手猜测不到,胡乱指挥一通,后果难以预料


页首
 用户资料  
 
10 楼 
 文章标题 : Re: 我用手册上的sudo apt-get install nvidia-glx 安装显卡驱动出现的错误
帖子发表于 : 2007-09-12 21:19 

注册: 2007-03-04 18:27
帖子: 5
送出感谢: 0 次
接收感谢: 0 次
tangyin 写道:
安装 nvidia-glx-legacy 也是一样virtualbox出错,请问huahua是什么原因啊?
获取:1 http://archive.ubuntu.org.cn dapper-security/restricted nvidia-glx-legacy 1.0.7174+2.6.15.12-28.2 [3061kB]
下载 3061kB,耗时 14s (206kB/s)
(正在读取数据库 ... 系统当前总共安装有 72965 个文件和目录。)
正在删除 nvidia-glx ...
ldconfig: /usr/lib/libgaim.so.0 is not a symbolic link

ldconfig: /usr/lib/libgaim-client.so.0 is not a symbolic link

选中了曾被取消选择的软件包 nvidia-glx-legacy。
(正在读取数据库 ... 系统当前总共安装有 72920 个文件和目录。)
正在解压缩 nvidia-glx-legacy (从 .../nvidia-glx-legacy_1.0.7174+2.6.15.12-28.2_i386.deb) ...
正在设置 virtualbox (1.3.6_Ubuntu_dapper) ...

Creating group 'vboxusers'. VM users must be member of that group!

* Starting VirtualBox kernel module vboxdrv FATAL: Module vboxdrv not found.

* Modprobe vboxdrv failed. Please use 'dmesg' to find out why.
invoke-rc.d: initscript virtualbox, action "start" failed.
dpkg:处理 virtualbox (--configure)时出错:
子进程·post-installation script·返回了错误号·1
正在设置 nvidia-glx-legacy (1.0.7174+2.6.15.12-28.2) ...
ldconfig: /usr/lib/libgaim.so.0 is not a symbolic link

ldconfig: /usr/lib/libgaim-client.so.0 is not a symbolic link


在处理时有错误发生:
virtualbox
E: Sub-process /usr/bin/dpkg returned an error code (1)



试试这条命令看看?:
sudo insmod /lib/modules/`uname -r`/misc/vboxdrv.ko :lol:


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 10 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译