当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 9 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : xmame出现LIRC Disabled错误
帖子发表于 : 2006-11-07 22:42 

注册: 2005-11-03 11:46
帖子: 95
送出感谢: 0 次
接收感谢: 0 次
沃野装了LIRC相关的包了,还是出现,请问怎么解决?


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2006-11-07 23:22 

注册: 2005-11-03 11:46
帖子: 95
送出感谢: 0 次
接收感谢: 0 次
已经安装了LIRC相关的包了,到底要怎么设置才能玩呢?
edgy eft


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2006-11-07 23:23 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
xmame-x, xmame-svga, xmame-sdl
你安装的是哪个?


_________________
● 鸣学


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2006-11-08 10:37 

注册: 2005-11-03 11:46
帖子: 95
送出感谢: 0 次
接收感谢: 0 次
xmame-x
安装的这个


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2006-11-10 12:29 

注册: 2006-10-22 13:39
帖子: 36
送出感谢: 0 次
接收感谢: 0 次
源里的xmame默认编译了对lirc的支持

如果是在有问题

就自己重新编译一下好了

这是我的Makefile


###########################################################################
# Xmame or xmess or...?
###########################################################################

# Uncomment one of these.
TARGET = mame
# TARGET = mess
# TARGET = mage
# TARGET = mmsnd
# example for a tiny compile
# TARGET = tiny


###########################################################################
# Special features
###########################################################################

# Enable experimental network support. See
# src/unix/doc/multiplayer-readme.txt for more information. (CURRENTLY
# BROKEN)
# XMAME_NET = 1

# Uncomment to use DRC MIPS3 engine (faster emulation, but only works on x86-
# compatible CPUs).
# X86_MIPS3_DRC = 1

# Uncomment to use DRC PowerPC engine (faster emulation, but only works on x86-
# compatible CPUs).
# X86_PPC_DRC = 1

# Uncomment if you'd like to disable effects. This can considerably speed
# up compilation of the blit files.
# DISABLE_EFFECTS = 1 如果你不用画面特效,把这个打开,能节省很多编译时间

# Uncomment the line below to enable the MMX assembly-language optimized
# routines for the "light scanlines" and "6-tap filter" effects. This
# requires an IA-32 processor with MMX capability and the NASM assembler.
#
# On Linux-i386 you can enable this without causing problems on non
# MMX capable processors: the Linux code will autodetect if an MMX
# capable processor is present and use the right code.
# EFFECT_MMX_ASM = 1



###########################################################################
# Input Devices
###########################################################################

# Uncomment any joystick types that you want to use; the one that is
# actually used can be selected at runtime with the -joytype switch.

# Enable the standard joystick driver, which should work in Linux, OpenBSD,
# NetBSD, and FreeBSD.
# JOY_STANDARD = 1

# Linux FM-TOWNS game pad joystick emulation support. Thanks to Osamu
# Kurati.
# JOY_PAD = 1

# NetBSD/FreeBSD USB joystick support.
# JOY_USB = 1

# PlayStation2-Linux native pad support.
# JOY_PS2 = 1

# SDL joystick support.
# JOY_SDL = 1

# This will enable the use of the Happ Controls UGCI(tm) USB devices'
# Coin/Start inputs using the libugci library available from
# http://www.phunnypharm.org/ugci/
# UGCICOIN = 1

# Enables use of Linux input devices that support ABS (absolute) X/Y axis
# events as lightguns. This can be tablets, touchpads or lightguns. You
# must have the input layer and support for your devices (e.g. USB) for
# this to work.
# LIGHTGUN_ABS_EVENT = 1

# Uncomment this if you get errors about a input_absinfo being undefined.
# Some versions of the Linux headers define this, others don't, and it
# seems to vary by distribution.
# LIGHTGUN_DEFINE_INPUT_ABSINFO = 1

# Uncomment this to add LIRC support to xmame.
# LIRC = 1


###########################################################################
# Sound Devices
###########################################################################

# Choose any additonal sound drivers you want to include, besides the
# native sound driver for your system.
SOUND_ESOUND = 1
SOUND_ALSA = 1
#SOUND_ARTS_TEIRA = 1
#SOUND_ARTS_SMOTEK = 1
# SOUND_SDL = 1
SOUND_WAVEOUT = 1


###########################################################################
# Select your display method; choose only one.
###########################################################################

# Note: x11 is the only one supported on almost all platforms. For BeOS,
# use SDL.

# X11 (including Glide & OpenGL if enabled below)
DISPLAY_METHOD = x11

# SDL library
# DISPLAY_METHOD = SDL

# SVGALib, only supported under Linux
# DISPLAY_METHOD = svgalib

# GGI, only tested under Linux
# DISPLAY_METHOD = ggi

# Glide in console mode
# DISPLAY_METHOD = svgafx

# OpenStep bitmaps
# DISPLAY_METHOD = openstep

# Photon 2.x (QNX6), currently buggy, but working...
# DISPLAY_METHOD = photon2


###########################################################################
# X-Window options (only needed when X is the display method)
###########################################################################

# Uncomment any extensions you wish to use.

# MIT-Shared Memory X Extensions
X11_MITSHM = 1

# Use Xv extension for hardware scaling.
X11_XV = 1

# Enable XFree86 DGA. This also causes "make install" to set the suid bit
# on the executable.
X11_DGA = 1

# Build support for OpenGL rendering into the X-Window version
X11_OPENGL = 1

# Build support for rendering through Glide into the X-Window version
# X11_GLIDE = 1

# The XIL library (Solaris 2.5.1 and higher)
# X11_XIL = 1
# Turn off the annoying obsolesence message if XIL is enabled
# CFLAGS += -DSUNXIL_WARNING_DISABLE

# Choose the location of your X headers and libraries.

# Standard location for X11
# X11INC = -I/usr/include/X11
# X11LIB = -L/usr/lib/X11

# Standard location for XFree86
X11INC = -I/usr/X11R6/include
X11LIB = -L/usr/X11R6/lib

# Standard location for Sun systems
# X11INC = -I/usr/openwin/include
# X11LIB = -L/usr/openwin/lib

# Some non-standard locations
# X11INC = -I/usr/local/include/X11
# X11LIB = -L/usr/local/lib

# The default name for the input device used by the X11 joystick driver.
# Use provided program "xlistdev" to list available ones.
X11_JOYNAME = "Joystick"

# Uncomment this to use XInput devices, e.g. additional mice as
# trackballs.
# XINPUT_DEVICES = 1

# Enable Xinerama support
# X11_XINERAMA = 1


......

http://packages.ubuntulinux.org/dapper/source/xmame
需要的包在这里看
不要build-dep xmame
这样会安装很多用不到的开发包


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2006-11-10 12:34 

注册: 2006-10-22 13:39
帖子: 36
送出感谢: 0 次
接收感谢: 0 次
edgy发布的有点匆忙
bug也比较多

就算自己编译了
libxf86dga扩展仍然有问题
会花屏
只能用Xv或者opengl

dapper下面的xmame没有什么Bug


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2006-11-10 16:04 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
应该不是软件的事情,是系统配置问题。我这里很好的。就是xmame-x
$● as xmame|grep ^i
i gxmame - GTK XMame frontend
i xmame-common - Multiple Arcade Machine Emulator
i xmame-sdl - SDL binaries for the Multiple Arcade Machi


_________________
● 鸣学


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2006-11-10 16:20 

注册: 2006-10-22 13:39
帖子: 36
送出感谢: 0 次
接收感谢: 0 次
eexpress 写道:
应该不是软件的事情,是系统配置问题。我这里很好的。就是xmame-x
$● as xmame|grep ^i
i gxmame - GTK XMame frontend
i xmame-common - Multiple Arcade Machine Emulator
i xmame-sdl - SDL binaries for the Multiple Arcade Machi

硬件驱动不一样
dapper里面xorg-driver-ati还会引起xmame-x11的opengl画面闪烁呢

sdl毛病最少
可惜效率太低了


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2006-11-10 22:39 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
我知道了。是驱动的问题,上午都是好的。现在出了。
http://forum.ubuntu.org.cn/viewtopic.ph ... highlight=


_________________
● 鸣学


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 9 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 1 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译