hylafax传真服务器拨外线的问题。 请求帮助

OOo,TeX,KO,ABI,GIMP,Picasa,ProE,QCAD,Inkscape,Kicad,Eagle
回复
头像
shuifu
帖子: 234
注册时间: 2007-07-23 12:20
送出感谢: 0
接收感谢: 0
联系:

hylafax传真服务器拨外线的问题。 请求帮助

#1

帖子 shuifu » 2007-09-16 17:31

电话是分机,拨外线需要加拨0。拨号时,总是把国家代码和长途区号一起给拨出去。
后来把国家代码、长途区号前缀给屏蔽掉,总算能拨号了。
现在却遇到这样一个问题,windows客户端发送传真,总是失败,都是拨号错误。各位兄弟帮忙看看错在哪里了?
TP-LINK TM-EC5658V 猫,接收传真倒是很正常。
这是info目录下的一个文件86019399
supportsVRes:1
supports2DEncoding:yes
supportsMMR:yes
hasV34Trouble:no
hasV17Trouble:no
senderHasV17Trouble:no
senderSkipsV29:no
supportsPostScript:no
supportsBatching:yes
calledBefore:no
maxPageWidth:2432
maxPageLength:65535
maxSignallingRate:"14400"
minScanlineTime:"0ms"
remoteCSI:""
remoteNSF:""
remoteDIS:""
sendFailures:0
dialFailures:9
lastDialFailure:"Unknown problem {E006}"
pagingProtocol:"ixo"
服务器状态:
shuifu@deutz-server:/var/spool/hylafax$ faxstat
HylaFAX scheduler on deutz-server: Running
Modem ttyS0 (86635887): Waiting for modem to come ready
shuifu@deutz-server:/var/spool/hylafax$
守护进程:
13116 ? 00:00:00 hfaxd
14152 ? 00:00:00 pickup
15506 ? 00:00:00 faxgetty
/var/spool/hylafax/etc/config
配置文件
LogFacility: daemon
#CountryCode: 86
#AreaCode: 0571
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules.europe
ServerTracing: 1
client存取配置文件
localhost
127.0.0.1
^gongcheng@
^xiaoshou@
^shuifu@
^zhenhe@
192.168.8.0
zhenhe@192.168.8.19
zhenhe@192.168.8.5
/var/spool/hylafax/config.ttyS0
MODEM配置文件
#CountryCode: 86
#AreaCode: 1
FAXNumber: 86635887
LongDistancePrefix: 0
InternationalPrefix: 011
DialStringRules: etc/dialrules.europe
ServerTracing: 1
SessionTracing: 0XFFF
RecvFileMode: 0754
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 2
SpeakerVolume: medium
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "ZhenHe.ltd"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: rtscts # RTS/CTS flow control assumed
#
ModemSoftFlowCmd: AT\Q1 # set desired flow control method
ModemHardFlowCmd: AT\Q3 # set desired flow control method
ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD follows carrier
ModemDialCmd: ATDT0w%s #外线拨0
#
# Happy days! This modem has proper support for querying
# the model, manufacturer, and firmware revision!
#
ModemMfrQueryCmd: AT+FMFR?
ModemModelQueryCmd: AT+FMDL?
ModemRevQueryCmd: AT+FREV?

Class1PPMWaitCmd: "<delay\0727>" # \072 == : to avoid awk problem
Class1TCFWaitCmd: "<delay\0727>"
Class1EOPWaitCmd: "<delay\0729>"
Class1SwitchingCmd: "<delay\0727>" # assumption: +FRS not supported
头像
shuifu
帖子: 234
注册时间: 2007-07-23 12:20
送出感谢: 0
接收感谢: 0
联系:

#2

帖子 shuifu » 2007-09-19 10:18

问题找到了,但是没有解决。
请各位兄弟看这里:viewtopic.php?t=75960
回复

回到 “办公、图像、机械电子设计等”