从suse的kde转来ubuntu的gnome,有一个问题搞的我很郁闷。

OOo,TeX,KO,ABI,GIMP,Picasa,ProE,QCAD,Inkscape,Kicad,Eagle
回复
ryanlee
帖子: 4
注册时间: 2005-12-21 22:04
送出感谢: 0
接收感谢: 0

从suse的kde转来ubuntu的gnome,有一个问题搞的我很郁闷。

#1

帖子 ryanlee » 2005-12-23 19:32

显卡GF 5700ultra
显示器三星795MB

sudo apt-get install nvidia-glx
sudo apt-get install nvidia-settings
sudo nvidia-glx-config enable

安装好驱动以后,无法正常重启或者关机,一关就黑屏或者花屏,花屏比例比较大。
但是可以正常的登录,3D也启动了,图形方面都很完美,就是不能关机,在图形界面下ctrl+alt+F2(花屏)等都不行。

sudo dpkg-reconfigure xserver-xorg 无效,问题依旧

原始xorg.conf如下:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV36 [GeForce FX 5700 Ultra]"
Driver "nvidia"
BusID "PCI:2:0:0"
EndSection

Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV36 [GeForce FX 5700 Ultra]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

刚开始想可能是可以使用的分辨率太多了,于是关掉了"1152x864""832x624" "720x400",无效,问题依旧

后来在启动的时候在grub里选择recover模式启动,然后再进入gnome,怪了,可以正常关机,何解?
反复试验若干,只有开机的时候用recover模式启动才能正常注销或者关机。
忘解答,虽然不太影响使用,但总觉得不完美.......
ryanlee
帖子: 4
注册时间: 2005-12-21 22:04
送出感谢: 0
接收感谢: 0

#2

帖子 ryanlee » 2005-12-23 19:34

ps:用recover模式登录以后ctrl+alt+F2也正常了。
回复

回到 “办公、图像、机械电子设计等”