kdm登录界面分辨率怎么改啊?
-
- 帖子: 37
- 注册时间: 2006-01-10 13:51
kdm登录界面分辨率怎么改啊?
我的显示器是17寸CRT的,登录界面偏偏给了个极高的分辨率,好像是1280x1024吧,
闪得利害。
我在/etc/xorg.conf里把大于 1024x768的分辨率都删掉,但是没有用,这个文件里也
找不到刷新率设置,应该怎么办呢?
Kubuntu 6.06
闪得利害。
我在/etc/xorg.conf里把大于 1024x768的分辨率都删掉,但是没有用,这个文件里也
找不到刷新率设置,应该怎么办呢?
Kubuntu 6.06
-
- 帖子: 3025
- 注册时间: 2005-05-07 23:57
- 联系:
-
- 帖子: 37
- 注册时间: 2006-01-10 13:51
xorg.conf帖在后面
还想问个问题,鼠标的速度怎么调啊?我的鼠标是Logitech Mouseman,
dpi 800,但是每次在KDE设置中心里选鼠标为800都仅对当前会话有效,重启以后
恢复400,拖着一个大鼠标慢慢的移动真的很累啊。。。如果改变鼠标加速度倒是可以保存的,
不过已经习惯不加速的鼠标了(cs害的)。。。
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "F720B"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
Monitor "F720B"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
还想问个问题,鼠标的速度怎么调啊?我的鼠标是Logitech Mouseman,
dpi 800,但是每次在KDE设置中心里选鼠标为800都仅对当前会话有效,重启以后
恢复400,拖着一个大鼠标慢慢的移动真的很累啊。。。如果改变鼠标加速度倒是可以保存的,
不过已经习惯不加速的鼠标了(cs害的)。。。
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "F720B"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
Monitor "F720B"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
-
- 帖子: 340
- 注册时间: 2005-12-31 12:17
把这段修改了
下次贴东西的时候不要这么贴
像我这样贴就可以了
下次贴东西的时候不要这么贴
像我这样贴就可以了
代码: 全选
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
上次由 种草得草 在 2006-06-14 18:29,总共编辑 1 次。
-
- 帖子: 340
- 注册时间: 2005-12-31 12:17
-
- 帖子: 37
- 注册时间: 2006-01-10 13:51
鼠标的问题搞定了
鼠标分辨率的问题也解决了,呵呵:)帖出来给大家分享
这里需要一个logitech_applet的程序
这样子会生成一个叫logitech-applet_0.4test1-1_i386.deb的包并且自动安装上。
运行
就会将鼠标分辨率设为800。
如果
写入
然后
每次启动的时候就会默认800cpi了。
这里需要一个logitech_applet的程序
代码: 全选
sudo apt-get install checkinstall build-essential libusb-dev
wget -c http://freshmeat.net/redir/logitech_applet/53319/url_tgz/logitech_applet-0.4test1.tar.gz
tar zxvf logitech_applet-0.4test1.tar.gz
mv logitech_applet-0.4test1 logitech-applet-0.4test1 #下划线变成减号,方便checkinstall
cd logitech-applet-0.4test1
./configure --prefix=/usr
make
sudo checkinstall
运行
代码: 全选
sudo logitech_applet -s 800 e
如果
代码: 全选
sudo vi /etc/init.d/local
代码: 全选
echo "Setting up Logitech mouse..."
logitech_applet -s 800 -e
代码: 全选
sudo chmod 755 /etc/init.d/local
sudo update-rc.d local defaults
- SecretZero
- 帖子: 1670
- 注册时间: 2007-08-30 5:39
Re: 鼠标的问题搞定了
现在的鼠标应该没有这个问题吧。。。rhymery 写了:鼠标分辨率的问题也解决了,呵呵:)帖出来给大家分享
这里需要一个logitech_applet的程序
这样子会生成一个叫logitech-applet_0.4test1-1_i386.deb的包并且自动安装上。代码: 全选
sudo apt-get install checkinstall build-essential libusb-dev wget -c http://freshmeat.net/redir/logitech_applet/53319/url_tgz/logitech_applet-0.4test1.tar.gz tar zxvf logitech_applet-0.4test1.tar.gz mv logitech_applet-0.4test1 logitech-applet-0.4test1 #下划线变成减号,方便checkinstall cd logitech-applet-0.4test1 ./configure --prefix=/usr make sudo checkinstall
运行就会将鼠标分辨率设为800。代码: 全选
sudo logitech_applet -s 800 e
如果写入代码: 全选
sudo vi /etc/init.d/local
然后代码: 全选
echo "Setting up Logitech mouse..." logitech_applet -s 800 -e
每次启动的时候就会默认800cpi了。代码: 全选
sudo chmod 755 /etc/init.d/local sudo update-rc.d local defaults