这里太冷清，发个桌面各位评评！
发表于 ： 2006-03-17 1:14
大家看看，给点意见!
分页： 1 / 1
发表于 ： 2006-03-17 8:20
还不错.
发表于 ： 2006-03-19 2:28
是XFCE4.3吧?兄弟已经Dapper了?
发表于 ： 2006-03-19 9:19
呵呵，dapper好久了！感觉4.3真的好了很多，以前要配置的地方现在基本是就是默认的，就像gnome一样不需要太多改动就能满足要求了。呵呵，但是又比gnome快，最适合笔记本电脑了！
发表于 ： 2006-03-19 10:49
呵呵，不错，够简洁的:)
发表于 ： 2006-03-20 17:18
好看 
发表于 ： 2006-03-21 9:32
强烈要求dapper的兄弟把从breezy升级到dapper的过程公布
发表于 ： 2006-03-21 10:46
现在用的这个系统是直接dapper安装的，没有通过升级。不过升级的步骤并不复杂啊！
1.修改/etc/apt/source.list中的源，使用dapper的源代替；
2.apt-get update
3.apt-get dist-upgrade
4.reboot
1.修改/etc/apt/source.list中的源，使用dapper的源代替；
2.apt-get update
3.apt-get dist-upgrade
4.reboot
发表于 ： 2006-05-05 18:54
建议使用aptitude 代替apt-get
发表于 ： 2006-05-21 16:05
Dapper的XFCE太像Gnome了...
发表于 ： 2006-05-23 22:39
现在用的这个系统是直接dapper安装的，没有通过升级。不过升级的步骤并不复杂啊！
1.修改/etc/apt/source.list中的源，使用dapper的源代替；
2.apt-get update
3.apt-get dist-upgrade
4.reboot
--------------
是错误的 不要这么搞
http://www.ubuntu.com/testing/dapperbet ... %286.06%29
Upgrading from Ubuntu 5.10
A new version of the Update Manager application has entered breezy-updates which can upgrade your entire system in a few simple steps.
To perform the upgrade:
1.
Update your system to ensure that you have the latest version of Update Manager and associated packages. The necessary versions are available from the breezy-updates repository, which is enabled by default.
2.
Run the following command (either via ALT-F2 or a terminal):
gksudo "update-manager -d"
*
The "-d" switch instructs Update Manager to consider pre-release versions, including this Beta release. Without this switch, only official, final releases will be considered.
If you have a working network connection, it should then inform you about a new release and offer to upgrade your system.
1.修改/etc/apt/source.list中的源，使用dapper的源代替；
2.apt-get update
3.apt-get dist-upgrade
4.reboot
--------------
是错误的 不要这么搞
http://www.ubuntu.com/testing/dapperbet ... %286.06%29
Upgrading from Ubuntu 5.10
A new version of the Update Manager application has entered breezy-updates which can upgrade your entire system in a few simple steps.
To perform the upgrade:
1.
Update your system to ensure that you have the latest version of Update Manager and associated packages. The necessary versions are available from the breezy-updates repository, which is enabled by default.
2.
Run the following command (either via ALT-F2 or a terminal):
gksudo "update-manager -d"
*
The "-d" switch instructs Update Manager to consider pre-release versions, including this Beta release. Without this switch, only official, final releases will be considered.
If you have a working network connection, it should then inform you about a new release and offer to upgrade your system.