PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.

CPU/显卡/打印机/USB设备等硬件问题
回复
头像
Crazier
帖子: 1051
注册时间: 2007-09-23 17:06
联系:

PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.

#1

帖子 Crazier » 2008-01-17 21:47

这是我的/var/log/dmesg的内容:
不知道为什么每次开机时都会提示说:
[ 13.069303] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 13.069361] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 13.069416] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 13.069470] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[ 13.069525] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[ 13.069580] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[ 13.069634] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[ 13.069689] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[ 13.069743] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2

但是却能正常运行,但是觉得不爽,还有就是不知道这是为什么,望高手指教
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e1000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7b90
[ 0.000000] Entering add_active_range(0, 0, 259792) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259792
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259792
[ 0.000000] On node 0 totalpages: 259792
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30179 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7B60 checksum 0
[ 0.000000] ACPI: RSDP 000F7B60, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 3F6D39FD, 007C (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3F6DDC2A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 3F6D4D5E, 8E58 (r2 INTEL CRESTLNE 6040000 MSFT 3000001)
[ 0.000000] ACPI: FACS 3F6E0FC0, 0040
[ 0.000000] ACPI: APIC 3F6DDD1E, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3F6DDD86, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3F6DDDBE, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: APIC 3F6DDDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3F6DDE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 3F6DDE8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer 0)
[ 0.000000] ACPI: SSDT 3F6D4A81, 02DD (r1 SataRe SataAhci 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6D4005, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6D3F5F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6D3A79, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257763
[ 0.000000] Kernel command line: root=UUID=944ae8b2-0141-4349-8682-18445254902d ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1600.154 MHz processor.
[ 9.681273] Console: colour VGA+ 80x25
[ 9.681613] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 9.681929] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.709026] Memory: 1018556k/1039168k available (2015k kernel code, 19904k reserved, 916k data, 364k init, 121664k highmem)
[ 9.709035] virtual kernel memory layout:
[ 9.709036] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 9.709038] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.709039] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 9.709040] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 9.709041] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 9.709042] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 9.709044] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 9.709047] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 9.709081] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 9.709232] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 9.709237] hpet0: 3 64-bit timers, 14318180 Hz
[ 9.790135] Calibrating delay using timer specific routine.. 3204.02 BogoMIPS (lpj=6408040)
[ 9.790162] Security Framework v1.0.0 initialized
[ 9.790169] SELinux: Disabled at boot.
[ 9.790182] Mount-cache hash table entries: 512
[ 9.790317] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 9.790325] monitor/mwait feature present.
[ 9.790327] using mwait in idle threads.
[ 9.790332] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 9.790334] CPU: L2 cache: 1024K
[ 9.790337] CPU: Physical Processor ID: 0
[ 9.790339] CPU: Processor Core ID: 0
[ 9.790341] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 9.790351] Compat vDSO mapped to ffffe000.
[ 9.790365] Checking 'hlt' instruction... OK.
[ 9.806227] SMP alternatives: switching to UP code
[ 9.806694] Early unpacking initramfs... done
[ 10.150573] ACPI: Core revision 20070126
[ 10.150634] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 10.220086] CPU0: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz stepping 0d
[ 10.220104] SMP alternatives: switching to SMP code
[ 10.220198] Booting processor 1/1 eip 3000
[ 10.230307] Initializing CPU#1
[ 10.309331] Calibrating delay using timer specific routine.. 3200.25 BogoMIPS (lpj=6400502)
[ 10.309338] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 10.309343] monitor/mwait feature present.
[ 10.309347] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.309349] CPU: L2 cache: 1024K
[ 10.309351] CPU: Physical Processor ID: 0
[ 10.309353] CPU: Processor Core ID: 1
[ 10.309354] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 10.309814] CPU1: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz stepping 0d
[ 10.309839] Total of 2 processors activated (6404.27 BogoMIPS).
[ 10.310025] ENABLING IO-APIC IRQs
[ 10.310230] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.457200] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 10.477186] Brought up 2 CPUs
[ 10.535198] migration_cost=710
[ 10.535333] Booting paravirtualized kernel on bare hardware
[ 10.535419] Time: 20:50:01 Date: 00/17/108
[ 10.535443] NET: Registered protocol family 16
[ 10.535528] EISA bus registered
[ 10.535533] ACPI: bus type pci registered
[ 10.536038] PCI: PCI BIOS revision 3.00 entry at 0xfdc91, last bus=10
[ 10.536040] PCI: Using configuration type 1
[ 10.536042] Setting up standard PCI resources
[ 10.538583] ACPI: EC: Look up EC in DSDT
[ 10.539430] ACPI: EC: GPE=0x18, ports=0x66, 0x62
[ 13.039643] ACPI: System BIOS is requesting _OSI(Linux)
[ 13.039646] ACPI: Please test with "acpi_osi=!Linux"
[ 13.039647] Please send dmidecode to linux-acpi@vger.kernel.org
[ 13.040793] ACPI: Interpreter enabled
[ 13.040796] ACPI: (supports S0 S3 S4 S5)
[ 13.040814] ACPI: Using IOAPIC for interrupt routing
[ 13.047122] ACPI: EC: GPE=0x18, ports=0x66, 0x62
[ 13.047172] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.047184] PCI: Probing PCI hardware (bus 00)
[ 13.049642] PCI: Transparent bridge - 0000:00:1e.0
[ 13.049723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.050131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 13.050274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 13.050413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 13.050576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 13.065923] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 13.066042] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 13.066159] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 13.066275] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 13.066391] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 13.066507] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 13.066622] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 13.066738] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 13.066879] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.066891] pnp: PnP ACPI init
[ 13.066900] ACPI: bus type pnp registered
[ 13.069198] pnp: PnP ACPI: found 11 devices
[ 13.069201] ACPI: ACPI bus type pnp unregistered
[ 13.069205] PnPBIOS: Disabled by ACPI PNP
[ 13.069295] PCI: Using ACPI for IRQ routing
[ 13.069298] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.069303] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 13.069361] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 13.069416] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 13.069470] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[ 13.069525] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[ 13.069580] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[ 13.069634] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[ 13.069689] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[ 13.069743] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2

[ 13.188801] NET: Registered protocol family 8
[ 13.188803] NET: Registered protocol family 20
[ 13.188878] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 13.188882] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 13.188885] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 13.188889] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 13.188892] Time: tsc clocksource has been installed.
[ 13.188901] Switched to high resolution mode on CPU 0
[ 13.188908] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 13.188994] Switched to high resolution mode on CPU 1
[ 13.219211] PCI: Bridge: 0000:00:1c.0
[ 13.219213] IO window: disabled.
[ 13.219220] MEM window: disabled.
[ 13.219225] PREFETCH window: disabled.
[ 13.219258] PCI: Bridge: 0000:00:1c.1
[ 13.219259] IO window: disabled.
[ 13.219266] MEM window: 50000000-500fffff
[ 13.219271] PREFETCH window: disabled.
[ 13.219331] PCI: Bridge: 0000:00:1c.2
[ 13.219333] IO window: disabled.
[ 13.219339] MEM window: 50100000-501fffff
[ 13.219344] PREFETCH window: disabled.
[ 13.219350] PCI: Bridge: 0000:00:1e.0
[ 13.219352] IO window: disabled.
[ 13.219358] MEM window: f0400000-f04fffff
[ 13.219363] PREFETCH window: disabled.
[ 13.219398] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 13.219408] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.219434] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
[ 13.219439] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 17
[ 13.219447] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.219473] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
[ 13.219478] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 13.219486] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 13.219501] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 13.219513] NET: Registered protocol family 2
[ 13.264625] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.264712] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 13.265638] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.266017] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.266020] TCP reno registered
[ 13.280737] checking if image is initramfs... it is
[ 13.959884] Freeing initrd memory: 7063k freed
[ 13.960010] Simple Boot Flag at 0x35 set to 0x1
[ 13.960509] audit: initializing netlink socket (disabled)
[ 13.960526] audit(1200603003.800:1): initialized
[ 13.960614] highmem bounce pool size: 64 pages
[ 13.962555] VFS: Disk quotas dquot_6.5.1
[ 13.962605] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.962702] io scheduler noop registered
[ 13.962704] io scheduler anticipatory registered
[ 13.962706] io scheduler deadline registered
[ 13.962720] io scheduler cfq registered (default)
[ 13.962739] Boot video device is 0000:00:02.0
[ 13.962983] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.963132] assign_interrupt_mode Found MSI capability
[ 13.963135] Allocate Port Service[0000:00:1c.0:pcie00]
[ 13.963171] Allocate Port Service[0000:00:1c.0:pcie02]
[ 13.963375] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.963520] assign_interrupt_mode Found MSI capability
[ 13.963523] Allocate Port Service[0000:00:1c.1:pcie00]
[ 13.963567] Allocate Port Service[0000:00:1c.1:pcie02]
[ 13.963779] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 13.963927] assign_interrupt_mode Found MSI capability
[ 13.963930] Allocate Port Service[0000:00:1c.2:pcie00]
[ 13.963960] Allocate Port Service[0000:00:1c.2:pcie02]
[ 13.964213] isapnp: Scanning for PnP cards...
[ 14.321081] isapnp: No Plug & Play device found
[ 14.342502] Real Time Clock Driver v1.12ac
[ 14.342752] hpet_resources: 0xfed00000 is busy
[ 14.342787] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.344009] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.344236] input: Macintosh mouse button emulation as /class/input/input0
[ 14.344317] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 14.346812] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 14.349041] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.349046] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 14.349049] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 14.349052] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 14.349054] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 14.349240] mice: PS/2 mouse device common for all mice
[ 14.349458] EISA: Probing bus 0 at eisa.0
[ 14.349468] Cannot allocate resource for EISA slot 1
[ 14.349517] EISA: Detected 0 cards.
[ 14.349705] TCP cubic registered
[ 14.349721] NET: Registered protocol family 1
[ 14.349745] Using IPI No-Shortcut mode
[ 14.349932] Magic number: 8:156:852
[ 14.350000] hash matches device ptyv4
[ 14.350228] Freeing unused kernel memory: 364k freed
[ 14.428020] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.568095] AppArmor: AppArmor initialized<5>audit(1200603005.300:2): type=1505 info="AppArmor initialized" pid=1247
[ 15.576396] fuse init (API version 7.8)
[ 15.582463] Failure registering capabilities with primary security module.
[ 15.610946] ACPI: SSDT 3F6D4781, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 15.611203] ACPI: SSDT 3F6D4264, 0498 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 15.611886] Monitor-Mwait will be used to enter C-1 state
[ 15.611889] Monitor-Mwait will be used to enter C-2 state
[ 15.611891] Monitor-Mwait will be used to enter C-3 state
[ 15.611897] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 15.611901] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 15.612142] ACPI: SSDT 3F6D49B9, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 15.612378] ACPI: SSDT 3F6D46FC, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 15.613114] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 15.613120] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 15.614806] ACPI: Thermal Zone [THRM] (46 C)
[ 5.736000] Marking TSC unstable due to: possible TSC halt in C2.
[ 5.740000] Time: hpet clocksource has been installed.
[ 6.216000] usbcore: registered new interface driver usbfs
[ 6.216000] usbcore: registered new interface driver hub
[ 6.216000] usbcore: registered new device driver usb
[ 6.216000] USB Universal Host Controller Interface driver v3.0
[ 6.216000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 6.216000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 6.216000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 6.216000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 6.216000] uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001820
[ 6.216000] usb usb1: configuration #1 chosen from 1 choice
[ 6.216000] hub 1-0:1.0: USB hub found
[ 6.216000] hub 1-0:1.0: 2 ports detected
[ 6.280000] SCSI subsystem initialized
[ 6.284000] libata version 2.21 loaded.
[ 6.320000] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 19
[ 6.320000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 6.320000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 6.320000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 6.320000] uhci_hcd 0000:00:1a.1: irq 19, io base 0x00001840
[ 6.320000] usb usb2: configuration #1 chosen from 1 choice
[ 6.320000] hub 2-0:1.0: USB hub found
[ 6.320000] hub 2-0:1.0: 2 ports detected
[ 6.424000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 6.424000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 6.424000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.424000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 6.424000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860
[ 6.424000] usb usb3: configuration #1 chosen from 1 choice
[ 6.424000] hub 3-0:1.0: USB hub found
[ 6.424000] hub 3-0:1.0: 2 ports detected
[ 6.500000] Clocksource tsc unstable (delta = -95966007 ns)
[ 6.528000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 21
[ 6.528000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 6.528000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.528000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 6.528000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001880
[ 6.528000] usb usb4: configuration #1 chosen from 1 choice
[ 6.528000] hub 4-0:1.0: USB hub found
[ 6.528000] hub 4-0:1.0: 2 ports detected
[ 6.632000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 6.632000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 6.632000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.632000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 6.632000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 6.632000] usb usb5: configuration #1 chosen from 1 choice
[ 6.632000] hub 5-0:1.0: USB hub found
[ 6.632000] hub 5-0:1.0: 2 ports detected
[ 6.736000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 6.736000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 6.736000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 6.736000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 6.736000] ehci_hcd 0000:00:1a.7: debug port 1
[ 6.736000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 6.736000] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0704800
[ 6.768000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 6.768000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.768000] usb usb6: configuration #1 chosen from 1 choice
[ 6.768000] hub 6-0:1.0: USB hub found
[ 6.768000] hub 6-0:1.0: 4 ports detected
[ 6.872000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 6.872000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.872000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.872000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 6.872000] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.872000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 6.872000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0704c00
[ 6.884000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.884000] usb usb7: configuration #1 chosen from 1 choice
[ 6.884000] hub 7-0:1.0: USB hub found
[ 6.884000] hub 7-0:1.0: 6 ports detected
[ 6.988000] tg3.c:v3.77 (May 31, 2007)
[ 6.988000] PCI: Enabling device 0000:05:00.0 (0000 -> 0002)
[ 6.988000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 6.988000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 7.028000] eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:24:bf:f3:74
[ 7.028000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 7.028000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 7.028000] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 7.084000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f0400000-f04007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 7.088000] ahci 0000:00:1f.2: version 2.2
[ 7.088000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 21
[ 7.088000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match
[ 7.300000] usb 3-1: device not accepting address 2, error -71
[ 8.092000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 8.092000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 8.092000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 8.092000] scsi0 : ahci
[ 8.092000] ata1: SATA max UDMA/133 cmd 0xf8872100 ctl 0x00000000 bmdma 0x00000000 irq 21
[ 8.144000] usb 3-1: new low speed USB device using uhci_hcd and address 4
[ 8.316000] usb 3-1: configuration #1 chosen from 1 choice
[ 8.396000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0078e07500]
[ 8.584000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.584000] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[ 8.584000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 8.584000] ata1.00: configured for UDMA/100
[ 8.584000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[ 8.584000] ata_piix 0000:00:1f.1: version 2.11
[ 8.584000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 21
[ 8.584000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 8.584000] scsi1 : ata_piix
[ 8.584000] scsi2 : ata_piix
[ 8.584000] ata2: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
[ 8.584000] ata3: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
[ 8.592000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 8.592000] sd 0:0:0:0: [sda] Write Protect is off
[ 8.592000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.592000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.592000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 8.592000] sd 0:0:0:0: [sda] Write Protect is off
[ 8.592000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.592000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.592000] sda:<6>usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 8.796000] usb 4-2: configuration #1 chosen from 1 choice
[ 8.828000] usbcore: registered new interface driver hiddev
[ 8.840000] input: Logitech Optical USB Mouse as /class/input/input2
[ 8.840000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
[ 8.852000] input: HID Keyboard Device as /class/input/input3
[ 8.852000] input: USB HID v1.10 Keyboard [HID Keyboard Device] on usb-0000:00:1d.1-2
[ 8.876000] input: HID Keyboard Device as /class/input/input4
[ 8.876000] input: USB HID v1.10 Device [HID Keyboard Device] on usb-0000:00:1d.1-2
[ 8.876000] usbcore: registered new interface driver usbhid
[ 8.876000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 8.904000] ata2.00: ATAPI: Optiarc CD-RW CRX880A, KX07, max UDMA/33
[ 8.996000] sda1 sda2 < sda5 sda6 sda7 sda8 sda9<6>ata2.00: configured for UDMA/33
[ 9.076000] sda10 sda11 sda12 >
[ 9.104000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.108000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.244000] scsi 1:0:0:0: CD-ROM Optiarc CD-RW CRX880A KX07 PQ: 0 ANSI: 5
[ 9.244000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.256000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 9.256000] Uniform CD-ROM driver Revision: 3.20
[ 9.256000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.820000] Attempting manual resume
[ 9.820000] swsusp: Resume From Partition 8:12
[ 9.820000] PM: Checking swsusp image.
[ 9.820000] PM: Resume from disk failed.
[ 9.848000] kjournald starting. Commit interval 5 seconds
[ 9.848000] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.236000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.272000] agpgart: Detected an Intel 965GM Chipset.
[ 16.272000] agpgart: Detected 7676K stolen memory.
[ 16.288000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 16.408000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.412000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.512000] sdhci: Secure Digital Host Controller Interface driver
[ 16.512000] sdhci: Copyright(c) Pierre Ossman
[ 16.512000] sdhci: SDHCI controller found at 0000:0a:09.1 [1180:0822] (rev 22)
[ 16.512000] ACPI: PCI Interrupt 0000:0a:09.1 -> GSI 17 (level, low) -> IRQ 16
[ 16.512000] mmc0: SDHCI at 0xf0400800 irq 16 DMA
[ 16.924000] ath_hal: module license 'Proprietary' taints kernel.
[ 16.928000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 16.984000] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
[ 17.024000] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 17.104000] wlan: 0.8.4.2 (0.9.3.2)
[ 17.244000] ath_pci: 0.9.4.5 (0.9.3.2)
[ 17.244000] PCI: Enabling device 0000:04:00.0 (0000 -> 0002)
[ 17.244000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 17.244000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 17.296000] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[ 17.296000] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 17.304000] usbcore: registered new interface driver xpad
[ 17.304000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_info_register
[ 17.324000] snd_rawmidi: Unknown symbol snd_info_register
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_seq_device_new
[ 17.324000] snd_rawmidi: Unknown symbol snd_seq_device_new
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_info_free_entry
[ 17.324000] snd_rawmidi: Unknown symbol snd_info_free_entry
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_unregister_oss_device
[ 17.324000] snd_rawmidi: Unknown symbol snd_unregister_oss_device
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_register_oss_device
[ 17.324000] snd_rawmidi: Unknown symbol snd_register_oss_device
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_ctl_register_ioctl
[ 17.324000] snd_rawmidi: Unknown symbol snd_ctl_register_ioctl
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_card_file_add
[ 17.324000] snd_rawmidi: Unknown symbol snd_card_file_add
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_unregister_device
[ 17.324000] snd_rawmidi: Unknown symbol snd_unregister_device
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_device_new
[ 17.324000] snd_rawmidi: Unknown symbol snd_device_new
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_ctl_unregister_ioctl
[ 17.324000] snd_rawmidi: Unknown symbol snd_ctl_unregister_ioctl
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_info_create_card_entry
[ 17.324000] snd_rawmidi: Unknown symbol snd_info_create_card_entry
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_card_file_remove
[ 17.324000] snd_rawmidi: Unknown symbol snd_card_file_remove
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_register_device_for_dev
[ 17.324000] snd_rawmidi: Unknown symbol snd_register_device_for_dev
[ 17.324000] snd_rawmidi: disagrees about version of symbol snd_device_register
[ 17.324000] snd_rawmidi: Unknown symbol snd_device_register
[ 17.344000] snd_seq_midi: Unknown symbol snd_rawmidi_info_select
[ 17.344000] snd_seq_midi: Unknown symbol snd_rawmidi_output_params
[ 17.344000] snd_seq_midi: Unknown symbol snd_rawmidi_kernel_read
[ 17.344000] snd_seq_midi: disagrees about version of symbol snd_seq_device_register_driver
[ 17.344000] snd_seq_midi: Unknown symbol snd_seq_device_register_driver
[ 17.344000] snd_seq_midi: Unknown symbol snd_rawmidi_kernel_write
[ 17.348000] snd_seq_midi: Unknown symbol snd_rawmidi_drain_output
[ 17.348000] snd_seq_midi: Unknown symbol snd_rawmidi_input_params
[ 17.348000] snd_seq_midi: Unknown symbol snd_rawmidi_kernel_open
[ 17.348000] snd_seq_midi: disagrees about version of symbol snd_seq_create_kernel_client
[ 17.348000] snd_seq_midi: Unknown symbol snd_seq_create_kernel_client
[ 17.348000] snd_seq_midi: Unknown symbol snd_rawmidi_kernel_release
[ 17.452000] snd_seq_dummy: disagrees about version of symbol snd_seq_create_kernel_client
[ 17.452000] snd_seq_dummy: Unknown symbol snd_seq_create_kernel_client
[ 17.768000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 17.768000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 18.820000] ALSA /usr/src/alsa/alsa-driver-1.0.15rc3/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:238: si3054: cannot initialize. EXT MID = 0000
[ 18.952000] loop: module loaded
[ 19.012000] lp: driver loaded but no devices found
[ 19.108000] Adding 433712k swap on /dev/sda12. Priority:-1 extents:1 across:433712k
[ 19.588000] EXT3 FS on sda9, internal journal
[ 21.940000] kjournald starting. Commit interval 5 seconds
[ 22.044000] EXT3 FS on sda11, internal journal
[ 22.044000] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.916000] kjournald starting. Commit interval 5 seconds
[ 22.916000] EXT3 FS on sda10, internal journal
[ 22.916000] EXT3-fs: mounted filesystem with ordered data mode.
areslp
帖子: 141
注册时间: 2007-05-07 23:55

#2

帖子 areslp » 2008-01-18 23:54

我也有类似的问题,机器是t61
头像
Maizhe
帖子: 132
注册时间: 2007-11-26 22:40

#3

帖子 Maizhe » 2008-02-11 8:26

我的也是,强烈期待高手指教~~~
我本将心向明月,奈何明月照渠沟
endpoint
帖子: 2
注册时间: 2008-02-14 9:36

#4

帖子 endpoint » 2008-02-14 9:38

areslp 写了:我也有类似的问题,机器是t61
握手!我也是T61,同样问题!
govi
帖子: 94
注册时间: 2007-04-20 23:21

#5

帖子 govi » 2008-02-17 10:57

我也是一样的问题,7.04下没这个问题,但7.10下就有这个问题,我的笔记本是acer as3050
exheamns
帖子: 58
注册时间: 2008-01-17 15:05
联系:

#6

帖子 exheamns » 2008-02-22 11:55

我的是三星R18的,装机时就出现这个,到现在我还没装上,快一天了,急~~~~~~~~~~
头像
tonytam
帖子: 485
注册时间: 2006-09-23 12:28

#7

帖子 tonytam » 2008-02-22 11:58

是说那个无线网卡...
govi
帖子: 94
注册时间: 2007-04-20 23:21

#8

帖子 govi » 2008-02-22 20:30

可即使把无线网卡装好了,也还是有这个问题,而且在7。10下,不显示进度条,只有黑屏,开机要2分钟左右;7。04下好一点,有进度条,开机也快点。
fskr_sb
帖子: 177
注册时间: 2008-01-20 21:39

#9

帖子 fskr_sb » 2008-02-22 21:56

我的也有这个问题。不过用着还凑合,就是这东西比较让人茫然而已
exheamns
帖子: 58
注册时间: 2008-01-17 15:05
联系:

#10

帖子 exheamns » 2008-02-22 23:39

换成了Debian了,但图形界面还是进不去
exheamns
帖子: 58
注册时间: 2008-01-17 15:05
联系:

#11

帖子 exheamns » 2008-02-23 0:15

ubuntu装都装不上
exheamns
帖子: 58
注册时间: 2008-01-17 15:05
联系:

#12

帖子 exheamns » 2008-02-23 1:36

终于下下来了 试试文本方式安装
回复