当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 7 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : NVIDIA显卡驱动配置问题
帖子发表于 : 2008-03-15 10:15 
头像

注册: 2006-09-10 21:02
帖子: 40
送出感谢: 0 次
接收感谢: 0 次
官方下了series7的驱动,安装网上说的步骤安装成功,重启后提示我处于底分辨率下

tintin@Edifier:~$ lspci|grep -i nvidia
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
06:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7300 GT] (rev a1)


进入系统选择 应用程序-》系统工具-》NVIDIA X Server settings提示:
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file(just run 'nvidia- xonfig' as root), and restart the X server.

请帮帮我看下咋回事啊,我要1440*900的分辨率
我的配置文件如下:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Feb 14 18:20:37 PST 2008

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
Load "v4l"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "Monitor"
Identifier "Failsafe Monitor"
VendorName "Plug 'n' Play"
ModelName "Plug 'n' Play"
Gamma 1
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection

Section "Monitor"
#
Identifier "monitor1"
Gamma 1
EndSection

Section "Device"
Identifier "Failsafe Device"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 7 Series"
BusID "PCI:6:0:0"
Screen 0
EndSection

Section "Device"
#
Identifier "device1"
Driver "nv"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 7 Series"
BusID "PCI:6:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Failsafe Device"
Monitor "Failsafe Monitor"
DefaultDepth 24
SubSection "Display"
Virtual 640 480
Depth 24
Modes "640x480@60"
EndSubSection
EndSection

Section "Screen"
#
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 24
EndSection


附件:
Screenshot-NVIDIA X Server Settings.png
Screenshot-NVIDIA X Server Settings.png [ 32.91 KiB | 被浏览 3897 次 ]

页首
 用户资料  
 
2 楼 
 文章标题 : Re: NVIDIA显卡驱动配置问题
帖子发表于 : 2009-02-22 17:04 

注册: 2008-05-15 9:17
帖子: 57
送出感谢: 0 次
接收感谢: 0 次
我也是你那样,安装的时候都行的,用了一会儿后重启之后就说显卡显示器无法识别。分辨率也变成800*600了,而且看了/etc/X11/xorg.xconf, 发现之前安装的时候nvidia自动生成的那个配置文件内容也变了..
昨天到今天还没有弄好...楼主解决好之后在这里面把答案弄出来下..
谢谢哈. :em11 :em11


页首
 用户资料  
 
3 楼 
 文章标题 : Re: NVIDIA显卡驱动配置问题
帖子发表于 : 2009-02-24 9:34 
头像

注册: 2007-05-25 16:47
帖子: 881
地址: 上海
送出感谢: 0 次
接收感谢: 0 次
执行
代码:
dmesg >> dmesg.txt


然后把dmesg.txt文件的内容贴上来看看


页首
 用户资料  
 
4 楼 
 文章标题 : Re: NVIDIA显卡驱动配置问题
帖子发表于 : 2009-02-24 10:45 

注册: 2008-05-15 9:17
帖子: 57
送出感谢: 0 次
接收感谢: 0 次
dmesg >> dmesg.txt

这里的dmesg.txt在什么目录里面?


页首
 用户资料  
 
5 楼 
 文章标题 : Re: NVIDIA显卡驱动配置问题
帖子发表于 : 2009-02-24 10:53 

注册: 2008-05-15 9:17
帖子: 57
送出感谢: 0 次
接收感谢: 0 次
找到了,以下是内容,从里面可以知道哪些信息?
/home/zww/dmesg.txt:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-generic (buildd@crested) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Feb 5 14:30:38 UTC 2009 (Ubuntu 2.6.24-23.49-generic)
[ 0.000000] Command line: root=UUID=8c217cd2-52a9-462f-83f0-4b3c0d8ef97d ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
[ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 393200) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8050 checksum 0
[ 0.000000] ACPI: RSDP 000F8050, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 5FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 5FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 5FFF3180, 5C83 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 5FFF0000, 0040
[ 0.000000] ACPI: SSDT 5FFF8F40, 00D3 (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: MCFG 5FFF9080, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 5FFF8E80, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] CPU has 1 num_cores
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000005fff0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 393200) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000005fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 393200
[ 0.000000] On node 0 totalpages: 393103
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1235 pages reserved
[ 0.000000] DMA zone: 2708 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5319 pages used for memmap
[ 0.000000] DMA32 zone: 383785 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:90000000)
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386493
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=8c217cd2-52a9-462f-83f0-4b3c0d8ef97d ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 27.169563] time.c: Detected 1809.267 MHz processor.
[ 27.170850] Console: colour VGA+ 80x25
[ 27.170854] console [tty0] enabled
[ 27.170871] Checking aperture...
[ 27.170874] CPU 0: aperture @ b638000000 size 32 MB
[ 27.170875] Aperture too small (32 MB)
[ 27.175786] No AGP bridge found
[ 27.195111] Memory: 1538272k/1572800k available (2492k kernel code, 34140k reserved, 1320k data, 320k init)
[ 27.195152] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 27.271379] Calibrating delay using timer specific routine.. 3621.62 BogoMIPS (lpj=7243246)
[ 27.271417] Security Framework initialized
[ 27.271424] SELinux: Disabled at boot.
[ 27.271440] AppArmor: AppArmor initialized
[ 27.271444] Failure registering capabilities with primary security module.
[ 27.271620] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 27.273456] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 27.274324] Mount-cache hash table entries: 256
[ 27.274478] Initializing cgroup subsys ns
[ 27.274482] Initializing cgroup subsys cpuacct
[ 27.274497] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 27.274499] CPU: L2 Cache: 512K (64 bytes/line)
[ 27.274502] CPU 0/0 -> Node 0
[ 27.274528] SMP alternatives: switching to UP code
[ 27.275213] Early unpacking initramfs... done
[ 27.610681] ACPI: Core revision 20070126
[ 27.610741] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 27.654968] Using local APIC timer interrupts.
[ 27.710148] APIC timer calibration result 12564345
[ 27.710150] Detected 12.564 MHz APIC timer.
[ 27.710206] Brought up 1 CPUs
[ 27.710304] CPU0 attaching sched-domain:
[ 27.710307] domain 0: span 01
[ 27.710308] groups: 01
[ 27.710466] net_namespace: 120 bytes
[ 27.710886] Time: 10:38:22 Date: 02/24/09
[ 27.710920] NET: Registered protocol family 16
[ 27.711103] ACPI: bus type pci registered
[ 27.711175] PCI: Using configuration type 1
[ 27.712444] ACPI: EC: Look up EC in DSDT
[ 27.718491] ACPI: Interpreter enabled
[ 27.718493] ACPI: (supports S0 S1 S4 S5)
[ 27.718506] ACPI: Using IOAPIC for interrupt routing
[ 27.728302] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 27.728872] PCI: Transparent bridge - 0000:00:06.0
[ 27.729173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 27.729448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 27.798403] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 27.798599] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 27.798794] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 27.798988] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 27.799184] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 27.799380] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 27.799574] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 27.799768] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 27.799963] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 27.800164] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 27.800359] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 27.800554] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 27.800749] ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15)
[ 27.800944] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 27.801144] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 27.801338] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 27.801534] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 27.801733] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 27.801970] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 27.802204] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 27.802429] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 27.802654] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 27.802879] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 27.803105] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 27.803330] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 27.803556] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 27.803782] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 27.804008] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 27.804234] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 27.804465] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 27.804691] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 27.804916] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 27.805142] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 27.805368] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 27.805594] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 27.805820] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 27.805955] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.805984] pnp: PnP ACPI init
[ 27.805993] ACPI: bus type pnp registered
[ 27.811403] pnpacpi: exceeded the max number of mem resources: 12
[ 27.811466] pnp: PnP ACPI: found 14 devices
[ 27.811469] ACPI: ACPI bus type pnp unregistered
[ 27.811703] PCI: Using ACPI for IRQ routing
[ 27.811708] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 27.825987] NET: Registered protocol family 8
[ 27.825989] NET: Registered protocol family 20
[ 27.826106] AppArmor: AppArmor Filesystem Enabled
[ 27.829959] Time: tsc clocksource has been installed.
[ 27.837979] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 27.837982] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 27.837985] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 27.837987] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 27.837990] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 27.837993] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 27.837999] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 27.838002] system 00:02: ioport range 0x800-0x87f has been reserved
[ 27.838004] system 00:02: ioport range 0x290-0x29f has been reserved
[ 27.838006] system 00:02: ioport range 0x290-0x297 has been reserved
[ 27.838017] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 27.838022] system 00:0d: iomem range 0xcee00-0xcffff has been reserved
[ 27.838025] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 27.838028] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 27.838030] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 27.838033] system 00:0d: iomem range 0x5fff0000-0x5fffffff could not be reserved
[ 27.838036] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 27.838038] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 27.838041] system 00:0d: iomem range 0x100000-0x5ffeffff could not be reserved
[ 27.838044] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 27.838046] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 27.838049] system 00:0d: iomem range 0xfefff000-0xfeffffff has been reserved
[ 27.838052] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved
[ 27.838421] PCI: Bridge: 0000:00:06.0
[ 27.838424] IO window: b000-bfff
[ 27.838426] MEM window: fde00000-fdefffff
[ 27.838428] PREFETCH window: fdd00000-fddfffff
[ 27.838431] PCI: Bridge: 0000:00:0b.0
[ 27.838432] IO window: a000-afff
[ 27.838434] MEM window: fdc00000-fdcfffff
[ 27.838436] PREFETCH window: fdb00000-fdbfffff
[ 27.838438] PCI: Bridge: 0000:00:0c.0
[ 27.838440] IO window: 9000-9fff
[ 27.838442] MEM window: fda00000-fdafffff
[ 27.838444] PREFETCH window: fd900000-fd9fffff
[ 27.838446] PCI: Bridge: 0000:00:0d.0
[ 27.838448] IO window: 8000-8fff
[ 27.838450] MEM window: fd800000-fd8fffff
[ 27.838452] PREFETCH window: fd700000-fd7fffff
[ 27.838454] PCI: Bridge: 0000:00:0e.0
[ 27.838456] IO window: 7000-7fff
[ 27.838458] MEM window: fd600000-fd6fffff
[ 27.838460] PREFETCH window: fd500000-fd5fffff
[ 27.838464] PCI: Bridge: 0000:00:0f.0
[ 27.838466] IO window: 6000-6fff
[ 27.838468] MEM window: fa000000-fcffffff
[ 27.838470] PREFETCH window: e0000000-efffffff
[ 27.838478] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 27.838484] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 27.838489] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 27.838499] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 27.838505] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 27.838511] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 27.838521] NET: Registered protocol family 2
[ 27.873993] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 27.874846] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 27.878453] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 27.879314] TCP: Hash tables configured (established 262144 bind 65536)
[ 27.879317] TCP reno registered
[ 27.890028] checking if image is initramfs... it is
[ 28.341083] Switched to high resolution mode on CPU 0
[ 28.544561] Freeing initrd memory: 7554k freed
[ 28.551429] audit: initializing netlink socket (disabled)
[ 28.551440] audit(1235471902.336:1): initialized
[ 28.553430] VFS: Disk quotas dquot_6.5.1
[ 28.553505] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 28.553643] io scheduler noop registered
[ 28.553646] io scheduler anticipatory registered
[ 28.553647] io scheduler deadline registered
[ 28.553749] io scheduler cfq registered (default)
[ 28.553775] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 28.554338] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 28.554354] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 28.554364] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 28.554376] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 28.554390] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 28.554401] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 28.554413] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 28.554424] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 28.554436] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 28.554448] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 28.554465] Boot video device is 0000:06:00.0
[ 28.554620] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 28.554640] assign_interrupt_mode Found MSI capability
[ 28.554658] Allocate Port Service[0000:00:0b.0:pcie00]
[ 28.554715] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 28.554734] assign_interrupt_mode Found MSI capability
[ 28.554748] Allocate Port Service[0000:00:0c.0:pcie00]
[ 28.554799] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 28.554818] assign_interrupt_mode Found MSI capability
[ 28.554832] Allocate Port Service[0000:00:0d.0:pcie00]
[ 28.554885] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 28.554905] assign_interrupt_mode Found MSI capability
[ 28.554918] Allocate Port Service[0000:00:0e.0:pcie00]
[ 28.554971] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 28.554990] assign_interrupt_mode Found MSI capability
[ 28.555003] Allocate Port Service[0000:00:0f.0:pcie00]
[ 28.581361] Real Time Clock Driver v1.12ac
[ 28.581460] Linux agpgart interface v0.102
[ 28.581463] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 28.581586] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.582117] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.582813] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 28.582881] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 28.582968] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 28.583299] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.583304] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 28.588841] mice: PS/2 mouse device common for all mice
[ 28.588881] cpuidle: using governor ladder
[ 28.588883] cpuidle: using governor menu
[ 28.589031] NET: Registered protocol family 1
[ 28.589135] registered taskstats version 1
[ 28.589271] Magic number: 13:418:629
[ 28.589422] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 28.589425] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 28.589427] EDD information not available.
[ 28.589434] Freeing unused kernel memory: 320k freed
[ 28.590005] Write protecting the kernel read-only data: 1036k
[ 28.616568] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 29.803189] fuse init (API version 7.9)
[ 29.816089] ACPI: Fan [FAN] (on)
[ 29.821086] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 29.822628] ACPI: Thermal Zone [THRM] (40 C)
[ 30.480674] usbcore: registered new interface driver usbfs
[ 30.480697] usbcore: registered new interface driver hub
[ 30.485295] usbcore: registered new device driver usb
[ 30.495818] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 30.496262] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 30.496272] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
[ 30.496362] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 30.496369] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 30.496610] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 30.496633] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 30.518710] SCSI subsystem initialized
[ 30.551270] usb usb1: configuration #1 chosen from 1 choice
[ 30.551292] hub 1-0:1.0: USB hub found
[ 30.551301] hub 1-0:1.0: 10 ports detected
[ 30.556270] libata version 3.00 loaded.
[ 30.653540] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 30.653552] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
[ 30.653654] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 30.653661] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 30.653732] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 30.653760] ehci_hcd 0000:00:02.1: debug port 1
[ 30.653763] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 30.653774] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 30.665366] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 30.665478] usb usb2: configuration #1 chosen from 1 choice
[ 30.665499] hub 2-0:1.0: USB hub found
[ 30.665505] hub 2-0:1.0: 10 ports detected
[ 30.749128] FDC 0 is a post-1991 82077
[ 30.768981] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 30.769390] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 30.769400] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
[ 30.769406] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 31.288237] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:e0:4d:07:27:24
[ 31.288243] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 31.288362] pata_amd 0000:00:04.0: version 0.3.10
[ 31.288416] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 31.289388] scsi0 : pata_amd
[ 31.290080] scsi1 : pata_amd
[ 31.290816] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 31.290819] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 31.799284] ata1.00: ATA-6: ST340810A, 3.99, max UDMA/100
[ 31.799289] ata1.00: 78165360 sectors, multi 16: LBA
[ 31.799306] ata1.01: ATAPI: BENQ DVD DC DW2000, 9B3E, max UDMA/66
[ 31.799317] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 31.815191] ata1.00: configured for UDMA/100
[ 32.002693] ata1.01: configured for UDMA/33
[ 32.002725] ata2: port disabled. ignoring.
[ 32.002840] scsi 0:0:0:0: Direct-Access ATA ST340810A 3.99 PQ: 0 ANSI: 5
[ 32.004208] scsi 0:0:1:0: CD-ROM BENQ DVD DC DW2000 9B3E PQ: 0 ANSI: 5
[ 32.006554] sata_nv 0000:00:05.0: version 3.5
[ 32.006968] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 32.006978] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[ 32.007119] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 32.009028] scsi2 : sata_nv
[ 32.009369] scsi3 : sata_nv
[ 32.009554] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 20
[ 32.009557] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 20
[ 32.473688] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.528391] ata3.00: ATA-7: ST3160812AS 41N3268 LEN, 3.AAK, max UDMA/133
[ 32.528395] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 32.594912] ata3.00: configured for UDMA/133
[ 32.904911] ata4: SATA link down (SStatus 0 SControl 300)
[ 32.915294] scsi 2:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5
[ 32.915759] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 32.915762] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 32.915908] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 32.916749] scsi4 : sata_nv
[ 32.917366] scsi5 : sata_nv
[ 32.917564] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 23
[ 32.917567] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 23
[ 33.228340] ata5: SATA link down (SStatus 0 SControl 300)
[ 33.547765] ata6: SATA link down (SStatus 0 SControl 300)
[ 33.571465] Driver 'sd' needs updating - please use bus_type methods
[ 33.571556] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 33.571567] sd 0:0:0:0: [sda] Write Protect is off
[ 33.571569] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.571583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.571623] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 33.571631] sd 0:0:0:0: [sda] Write Protect is off
[ 33.571633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.571646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.571650] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 33.591546] sda1 sda2 sda3 < sda5 >
[ 33.625723] sd 0:0:0:0: [sda] Attached SCSI disk
[ 33.626663] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 33.626675] sd 2:0:0:0: [sdb] Write Protect is off
[ 33.626677] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.626692] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.626731] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 33.626740] sd 2:0:0:0: [sdb] Write Protect is off
[ 33.626742] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.626755] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.626759] sdb:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 33.633959] Uniform CD-ROM driver Revision: 3.20
[ 33.634011] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 33.640718] sdb1 sdb2 < sdb5 sdb6 sdb7 >
[ 33.673009] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 33.680775] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.680794] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 33.680813] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 34.219819] Attempting manual resume
[ 34.219822] swsusp: Resume From Partition 8:1
[ 34.219824] PM: Checking swsusp image.
[ 34.220047] PM: Resume from disk failed.
[ 34.246129] kjournald starting. Commit interval 5 seconds
[ 34.246147] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.686854] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.735897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.796434] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 44.796455] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 44.838847] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 44.893381] input: Power Button (FF) as /devices/virtual/input/input3
[ 44.903536] ACPI: Power Button (FF) [PWRF]
[ 44.903652] input: Power Button (CM) as /devices/virtual/input/input4
[ 44.919515] ACPI: Power Button (CM) [PWRB]
[ 44.919600] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 44.935484] ACPI: Sleep Button (CM) [SLPB]
[ 45.990727] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 46.172452] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 46.172458] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
[ 46.172625] PCI: Setting latency timer of device 0000:00:06.1 to 64
[ 46.203729] hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
[ 47.493755] nvidia: module license 'NVIDIA' taints kernel.
[ 47.762965] parport_pc 00:09: reported by Plug and Play ACPI
[ 47.763011] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 47.843615] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 47.843627] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
[ 47.843635] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 47.844102] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.29 Wed Feb 4 23:39:47 PST 2009
[ 49.529617] lp0: using parport0 (interrupt-driven).
[ 49.618678] Adding 497972k swap on /dev/sda1. Priority:-1 extents:1 across:497972k
[ 50.176334] EXT3 FS on sda2, internal journal
[ 51.029062] kjournald starting. Commit interval 5 seconds
[ 51.029447] EXT3 FS on sda5, internal journal
[ 51.029451] EXT3-fs: mounted filesystem with ordered data mode.
[ 51.551273] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 52.015875] No dock devices found.
[ 52.311586] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[ 52.311622] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
[ 52.311624] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 53.467849] ppdev: user-space parallel port driver
[ 53.695910] audit(1235443128.334:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5162 profile="/usr/sbin/cupsd" namespace="default"
[ 55.184771] Bluetooth: Core ver 2.11
[ 55.185794] NET: Registered protocol family 31
[ 55.185798] Bluetooth: HCI device and connection manager initialized
[ 55.185803] Bluetooth: HCI socket layer initialized
[ 55.209213] Bluetooth: L2CAP ver 2.9
[ 55.209217] Bluetooth: L2CAP socket layer initialized
[ 55.273827] Bluetooth: RFCOMM socket layer initialized
[ 55.273849] Bluetooth: RFCOMM TTY layer initialized
[ 55.273851] Bluetooth: RFCOMM ver 1.8
[ 55.788224] Marking TSC unstable due to cpufreq changes
[ 55.796139] Time: acpi_pm clocksource has been installed.
[ 56.068983] Clocksource tsc unstable (delta = -225054268 ns)
[ 57.300777] NET: Registered protocol family 17
[ 59.630788] NET: Registered protocol family 10
[ 59.631007] lo: Disabled Privacy Extensions
[ 65.885624] eth0: no IPv6 routers present


页首
 用户资料  
 
6 楼 
 文章标题 : Re: NVIDIA显卡驱动配置问题
帖子发表于 : 2009-02-24 11:34 

注册: 2008-05-15 9:17
帖子: 57
送出感谢: 0 次
接收感谢: 0 次
今天我的驱动弄好了。重启之后也ok了。是按照网上的办法弄的。楼主可以试试看。
1。在配置文件(/etc/default/linux-restricted-modules-common )中屏蔽这几个包(nv nvidia_new)
代码:
sudo gedit /etc/default/linux-restricted-modules-common

加入下面这行:
DISABLED_MODULES="nv nvidia_new"
然后保存,目的是禁止系统使用默认的驱动。
2。ctrl+alt+F1 进入字符界面。 登录之后 关闭xserver ( gdm )
代码:
sudo /etc/init.d/gdm stop

3。重新安装nvidia官方驱动。
代码:
sudo sh 你的驱动文件路径

安装过程中如果说你的x系统还没有关闭的话,那就直接重启之后再装。
装完后记得在字符界面的时候以root权限运行nvidia-xconfig,(之前重启后低分辨率运行系统-首选项-nv xserver setting出错弹出那个对话框的可能就是因为没有运行这个? )
代码:
sudo nvidia-xconfig

4。最后一步就是启动xserver(gdm )
代码:
sudo /etc/init.d/gdm start

之后就可以看到nvidia的logo了。
网上说如果不想要logo的话,可以手动配置下xorg.conf文件。
代码:
sudo gedit /etc/X11/xorg.conf

在Section "Device" 关于显卡配置的那一段里面添加Option "NoLogo" "True"这一行就行了。如:
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 7 Series"
BusID "PCI:6:0:0"
Screen 0
EndSection
不过我没有试过。觉得nv的logo还不错。呵呵。。。
:em01 :em01
希望这个能帮到楼主。


页首
 用户资料  
 
7 楼 
 文章标题 : Re: NVIDIA显卡驱动配置问题
帖子发表于 : 2009-03-04 17:30 
头像

注册: 2007-05-25 16:47
帖子: 881
地址: 上海
送出感谢: 0 次
接收感谢: 0 次
zq76zw 写道:
找到了,以下是内容,从里面可以知道哪些信息?


大部分的硬件信息都在这里,从这个信息里可以看出显卡使用版本号,加载的模块,有没有新旧版本冲突等等


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 7 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:Bing [Bot] 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译