当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 2 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : nvidia驱动搞不定
帖子发表于 : 2008-03-30 1:41 

注册: 2006-08-08 10:43
帖子: 30
送出感谢: 0 次
接收感谢: 0 次
为什么我的Dell D630安装了受限驱动后,进入GDM画面后可以听到登陆时的欢迎声音,屏幕却显示黑屏,后面附上相关配置,显卡是nvidia quadro nvs 135m,分辨率为1280x800

abc@ubuntu:~$ cat /etc/X11/xorg.conf.20080329
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation G80 [Quadro NVS 135M]"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection

Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
Horizsync 28-64
Vertrefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G80 [Quadro NVS 135M]"
Monitor "通用显示器"
Defaultdepth 24
SubSection "Display"
Modes "1280x1280"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
EndSection


abc@ubuntu:~$ cat .xsession-errors

(process:5734): Gtk-WARNING **: This process is currently running setuid or setgid.
This is not a supported use of GTK+. You must create a helper
program instead. For further details, see:

http://www.gtk.org/setuid.html

Refusing to initialize GTK+.

(process:5738): Gtk-WARNING **: This process is currently running setuid or setgid.
This is not a supported use of GTK+. You must create a helper
program instead. For further details, see:

http://www.gtk.org/setuid.html

Refusing to initialize GTK+.
/etc/gdm/Xsession: Beginning session setup...
Setting IM through im-switch for locale=zh_CN.
Start IM through /etc/X11/xinit/xinput.d/zh_CN linked to /etc/X11/xinit/xinput.d/fcitx.
SESSION_MANAGER=local/ubuntu:/tmp/.ICE-unix/5731
Checking for Xgl: not present.
No whitelisted driver found
aborting and using fallback: /usr/bin/metacity
窗口管理器警告: 无法读取保存的会话文件 /home/shanpeng/.metacity/sessions/default0.ms:打开文件“/home/shanpeng/.metacity/sessions/default0.ms”失败:No such file or directory


Tracker version 0.6.3 Copyright (c) 2005-2007 by Jamie McCracken (jamiemcc@gnome.org)

This program is free software and comes without any warranty.
It is licensed under version 2 or later of the General Public License which can be viewed at http://www.gnu.org/licenses/gpl.txt

Initialising tracker...
Could not set idle IO priority...attempting best effort 7 priority
Throttle level is 0
Initializing gnome-mount extension
** Message: 没有启动远程桌面服务器
窗口管理器警告: last_user_time (149908472) is greater than comparison timestamp (4221335027). This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW. Trying to work around...
窗口管理器警告: 0x30000da (Ubuntu中�) appears to be one of the offending windows with a timestamp of 149908472. Working around...

(gnome-terminal:6030): Vte-WARNING **: 控制字符序列“device-control-string”的处理程序未定义。
窗口管理器警告: last_user_time (147521064) is greater than comparison timestamp (4221402019). This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW. Trying to work around...
窗口管理器警告: 0x30000da (Ubuntu中�) appears to be one of the offending windows with a timestamp of 147521064. Working around...


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2008-03-30 4:17 
头像

注册: 2007-11-07 14:41
帖子: 296
地址: 佳木斯
送出感谢: 0 次
接收感谢: 0 次
LZ的Rp。。。。
我给老师的D620装的时候显卡和声卡都支持的很好


_________________
Dell 1520
------------------------
Intel Core T7500
1G*2
120G
Nvidia 8600 GT
My BLOG


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 2 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译