gdm与gnome桌面偏移问题

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
daipeng9017
帖子: 50
注册时间: 2006-10-29 13:46
送出感谢: 0
接收感谢: 0

gdm与gnome桌面偏移问题

#1

帖子 daipeng9017 » 2008-03-30 10:20

起机进入gdm欢迎界面显示器偏移中心,如果用显示器调整正常,那么进入桌面则偏移中心。请教一下。
这是

代码: 全选

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"cn"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"vmmouse"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	Boardname	"NVIDIA GeForce 8 Series"
	Busid		"PCI:2:0:0"
	Driver		"nvidia"
	Screen	0
	Vendorname	"NVIDIA"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
	Vendorname	"Dell"
	Modelname	"Dell E228WFP"
	Horizsync	30.0-83.0
	Vertrefresh	56.0-75.0
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1280x768@60" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
  modeline  "1280x720@60" 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
  modeline  "1280x800@75" 107.21 1280 1360 1496 1712 800 801 804 835 -hsync +vsync
  modeline  "1280x768@75" 102.98 1280 1360 1496 1712 768 769 772 802 -hsync +vsync
  modeline  "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
  modeline  "1440x900@75" 136.49 1440 1536 1688 1936 900 901 904 940 -hsync +vsync
  modeline  "1440x900@60" 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
  modeline  "1600x1024@60" 136.36 1600 1704 1872 2144 1024 1025 1028 1060 -hsync +vsync
  modeline  "1680x1050@60" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
  modeline  "1680x1050@75" 188.07 1680 1800 1984 2288 1050 1051 1054 1096 -hsync +vsync
  modeline  "1920x1200@60" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
	Gamma	1.0
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Virtual	1920	1200
		Modes		"1680x1050@60"	"1680x1050@75"	"800x600@60"	"800x600@75"	"800x600@72"	"800x600@56"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen 0 "Default Screen" 0 0
EndSection
Section "Module"
	Load		"glx"
	Load		"v4l"
EndSection
Section "ServerFlags"
EndSection
daipeng9017
帖子: 50
注册时间: 2006-10-29 13:46
送出感谢: 0
接收感谢: 0

#2

帖子 daipeng9017 » 2008-03-30 10:20

我的分辨率设定为:1680*1050
回复

回到 “常用硬件支持”