分页: 1 / 1
[问题]鼠标在linux下移动慢,卡
发表于 : 2008-04-14 2:15
由 wshy
我是神舟笔记本天运V700S,C71.5G+240M+集成显卡,不是AMD或者intel的CPU。
在windows下鼠标不卡,在linux下换同学的鼠标也卡,就是鼠标在屏幕上移动很卡,反应很慢,只能用触摸屏,太不方便了
换过红旗6.0,华镭2.0,slackware12.0都是这样,UBUNTU没试过,因为不能安装
是什么原因啊?能解决吗?
发表于 : 2008-04-14 2:31
由 qiang_liu8183
我的鼠标在Linux下比在Windows下好用
发表于 : 2008-04-14 8:26
由 sammysun
我的不卡,动的很快,都没反应过来就移动到另外的地方去了,呵呵~~
发表于 : 2008-04-14 9:02
由 eexpress
man xset 看 mouse 一段,调整灵敏度和阈值。
或
看xorg.conf 中 mouse 部分,驱动的名称。
信息都无,就只能自己折腾了。
发表于 : 2008-04-16 14:48
由 wshy
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
# Option "Protocol" "Auto"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
Option "Protocol" "PS/2"
# The mouse device. The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.
Option "Device" "/dev/mouse"
# Option "Device" "/dev/psaux"
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
我是LZ,这是我xorg.conf中的鼠标部分,是slackware12.0,没改过,是默认的,不知道是不是VIA的CPU和LINUX不兼容啊
发表于 : 2008-04-16 14:54
由 eexpress
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
试试
发表于 : 2008-04-18 19:48
由 wshy
还是不行,我的是USB光电鼠标