Usb- storage 问题
发表于 : 2008-04-25 20:02
首先说我一下我的情况。我用的是笔记本,鼠标是p/s2,由于笔记本没有ps/2接口,所以接了个ps/2 转 usb的模块。
不知道是不是这个原因,我的usb盘始终用不起。另外,我是装的虚拟机,虚拟的硬盘选的是串口硬盘~~~
下面看看情况:
hobby@hobby-desktop:~$ dmesg (关于usb部分的)
……
[27423.187840] Clocksource tsc unstable (delta = 1011172364 ns)
[27423.189597] Time: acpi_pm clocksource has been installed.
[27423.474808] usb 1-1: new full speed USB device using uhci_hcd and address 2
[27424.805331] usb 1-1: configuration #1 chosen from 1 choice
[27425.112762] usbcore: registered new interface driver libusual
[27425.972286] Initializing USB Mass Storage driver...
[27425.988029] scsi3 : SCSI emulation for USB Mass Storage devices
[27426.005662] usbcore: registered new interface driver usb-storage
[27426.012332] USB Mass Storage support registered.
[27426.017863] usb-storage: device found at 2
[27426.017939] usb-storage: waiting for device to settle before scanning
[27431.016464] usb-storage: device scan complete
[27431.154331] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[27431.962379] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[27432.465917] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[27433.088294] usb 1-1: reset full speed USB device using uhci_hcd and address 2
说明是能认识的。。。。。
hobby@hobby-desktop:~$ cat /proc/partitions
major minor #blocks name
8 0 8388608 sda
8 1 64228 sda1
8 2 1 sda2
8 5 497983 sda5
8 6 4883728 sda6
8 7 2939863 sda7
可以看出,只有硬盘,没有其他u 盘信息。但是实际上我已经把u盘插在系统上了
如下命令:
hobby@hobby-desktop:/proc/scsi$ cd usb-storage/
hobby@hobby-desktop:/proc/scsi/usb-storage$ ls
3
hobby@hobby-desktop:/proc/scsi/usb-storage$ cat 3
Host scsi3: usb-storage
Vendor: ALi Corporation
Product: ALi Music Player
Serial Number: 12345000100000000005
Protocol: Transparent SCSI
Transport: Bulk
Quirks:
hobby@hobby-desktop:/proc/scsi/usb-storage$
请问到底怎么挂U盘嘛???????????????
?????????????????????
不知道是不是这个原因,我的usb盘始终用不起。另外,我是装的虚拟机,虚拟的硬盘选的是串口硬盘~~~
下面看看情况:
hobby@hobby-desktop:~$ dmesg (关于usb部分的)
……
[27423.187840] Clocksource tsc unstable (delta = 1011172364 ns)
[27423.189597] Time: acpi_pm clocksource has been installed.
[27423.474808] usb 1-1: new full speed USB device using uhci_hcd and address 2
[27424.805331] usb 1-1: configuration #1 chosen from 1 choice
[27425.112762] usbcore: registered new interface driver libusual
[27425.972286] Initializing USB Mass Storage driver...
[27425.988029] scsi3 : SCSI emulation for USB Mass Storage devices
[27426.005662] usbcore: registered new interface driver usb-storage
[27426.012332] USB Mass Storage support registered.
[27426.017863] usb-storage: device found at 2
[27426.017939] usb-storage: waiting for device to settle before scanning
[27431.016464] usb-storage: device scan complete
[27431.154331] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[27431.962379] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[27432.465917] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[27433.088294] usb 1-1: reset full speed USB device using uhci_hcd and address 2
说明是能认识的。。。。。
hobby@hobby-desktop:~$ cat /proc/partitions
major minor #blocks name
8 0 8388608 sda
8 1 64228 sda1
8 2 1 sda2
8 5 497983 sda5
8 6 4883728 sda6
8 7 2939863 sda7
可以看出,只有硬盘,没有其他u 盘信息。但是实际上我已经把u盘插在系统上了
如下命令:
hobby@hobby-desktop:/proc/scsi$ cd usb-storage/
hobby@hobby-desktop:/proc/scsi/usb-storage$ ls
3
hobby@hobby-desktop:/proc/scsi/usb-storage$ cat 3
Host scsi3: usb-storage
Vendor: ALi Corporation
Product: ALi Music Player
Serial Number: 12345000100000000005
Protocol: Transparent SCSI
Transport: Bulk
Quirks:
hobby@hobby-desktop:/proc/scsi/usb-storage$
请问到底怎么挂U盘嘛???????????????
?????????????????????