Vtion V1890 CDMA ExpressCard 问题

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
eqychan
帖子: 7
注册时间: 2008-05-01 2:58
送出感谢: 0
接收感谢: 0

Vtion V1890 CDMA ExpressCard 问题

#1

帖子 eqychan » 2008-05-11 15:27

我的Vtion V1890 ExpressCard 无线上网卡在不能工作,检测不到Modem,也检测不出tty设备

插卡后 sudo tail -f /var/log/messages输出如下信息

代码: 全选

May 11 15:03:31 daniel-openSUSE kernel: usb 7-1: USB disconnect, address 21
May 11 15:03:46 daniel-openSUSE kernel: usb 7-1: new full speed USB device using uhci_hcd and address 22
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: device descriptor read/64, error -71
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: device descriptor read/64, error -71
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: new full speed USB device using uhci_hcd and address 23
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: device descriptor read/64, error -71
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: device descriptor read/64, error -71
May 11 15:03:48 daniel-openSUSE kernel: usb 7-1: new full speed USB device using uhci_hcd and address 24
May 11 15:03:48 daniel-openSUSE kernel: usb 7-1: device not accepting address 24, error -71
May 11 15:03:48 daniel-openSUSE kernel: usb 7-1: new full speed USB device using uhci_hcd and address 26
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: new device found, idVendor=05c6, idProduct=3197
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: new device strings: Mfr=1, Product=2, SerialNumber=0
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: Product: Vtion V1890 
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: Manufacturer: Vtion , Express Card 
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: configuration #1 chosen from 1 choice
能识别产品的型号,但好像识别成USBXX了...
插卡前后 sudo dmesg|grep pciehp 输出信息没有变化

奇怪的是,插卡后用 sane-find-scanner,发现多了个扫描仪?? 输出 如下。

代码: 全选

# sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x05c6, product=0x3197) at libusb:007:036
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
lsusb 命令输出如下信息:

代码: 全选

Bus 007 Device 041: ID 05c6:3197 Qualcomm, Inc. CDMA Wireless Modem/Phone
Bus 007 Device 001: ID 0000:0000  
Bus 005 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 006 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
似乎找到modem,但不知道怎么驱动,呵呵。

我的系统是openSuSE 10.3 Asus Z99H54Sc 的本本,刚才连接不上openSuSE的论坛,所以发贴到这里了

望各位大侠救救我,错在哪里,怎么处理?
eqychan
帖子: 7
注册时间: 2008-05-01 2:58
送出感谢: 0
接收感谢: 0

#2

帖子 eqychan » 2008-05-12 1:14

头像
souling
帖子: 142
注册时间: 2007-07-22 10:40
送出感谢: 0
接收感谢: 1 次

#3

帖子 souling » 2008-05-12 21:46

在ubuntu下,还是不能驱动
回复

回到 “常用硬件支持”