插卡后 sudo tail -f /var/log/messages输出如下信息
代码: 全选
May 11 15:03:31 daniel-openSUSE kernel: usb 7-1: USB disconnect, address 21
May 11 15:03:46 daniel-openSUSE kernel: usb 7-1: new full speed USB device using uhci_hcd and address 22
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: device descriptor read/64, error -71
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: device descriptor read/64, error -71
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: new full speed USB device using uhci_hcd and address 23
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: device descriptor read/64, error -71
May 11 15:03:47 daniel-openSUSE kernel: usb 7-1: device descriptor read/64, error -71
May 11 15:03:48 daniel-openSUSE kernel: usb 7-1: new full speed USB device using uhci_hcd and address 24
May 11 15:03:48 daniel-openSUSE kernel: usb 7-1: device not accepting address 24, error -71
May 11 15:03:48 daniel-openSUSE kernel: usb 7-1: new full speed USB device using uhci_hcd and address 26
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: new device found, idVendor=05c6, idProduct=3197
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: new device strings: Mfr=1, Product=2, SerialNumber=0
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: Product: Vtion V1890
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: Manufacturer: Vtion , Express Card
May 11 15:03:49 daniel-openSUSE kernel: usb 7-1: configuration #1 chosen from 1 choice
插卡前后 sudo dmesg|grep pciehp 输出信息没有变化
奇怪的是,插卡后用 sane-find-scanner,发现多了个扫描仪?? 输出 如下。
代码: 全选
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x05c6, product=0x3197) at libusb:007:036
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
代码: 全选
Bus 007 Device 041: ID 05c6:3197 Qualcomm, Inc. CDMA Wireless Modem/Phone
Bus 007 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
我的系统是openSuSE 10.3 Asus Z99H54Sc 的本本,刚才连接不上openSuSE的论坛,所以发贴到这里了
望各位大侠救救我,错在哪里,怎么处理?